Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[adaseb]

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Which GPU is this exactly?

Most likely your fans are dead or dying and your GPU is throttling.

Then why does it run full guns 485 h/s when mining cryptonite ?  no problem there...only problem is equihash and claymore 12.6

What Is the make and model of your 280x ?

Try using the older 15.12 drivers and set clock to 1050/1500 or so.

[Sanguintan]

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Which GPU is this exactly?

Most likely your fans are dead or dying and your GPU is throttling.

Then why does it run full guns 485 h/s when mining cryptonite ?  no problem there...only problem is equihash and claymore 12.6

What Is the make and model of your 280x ?

Try using the older 15.12 drivers and set clock to 1050/1500 or so.

I have a few 7970 (280X), I run them at 950 mV, 900/1250MHz, quite stable.

[romansteel]

What's a decent claymore alternative to mine zec with nvidia cards?

[Simpan]

What's a decent claymore alternative to mine zec with nvidia cards?

EWBF or DSTM

[Kimax]

Has anyone tried 6rig ega gpu

[baraday]

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Which GPU is this exactly?

Most likely your fans are dead or dying and your GPU is throttling.

Then why does it run full guns 485 h/s when mining cryptonite ?  no problem there...only problem is equihash and claymore 12.6

What Is the make and model of your 280x ?

Try using the older 15.12 drivers and set clock to 1050/1500 or so.

I have a few 7970 (280X), I run them at 950 mV, 900/1250MHz, quite stable.

I am also running a few 7970 aka 280x, @1050/1400 1110-1150mV (depends on the specific card) and making with a modded BIOS ~300+ Sol per card. If the -i setting does nothing, then something is wrong on your side, mine 280x' run stable with i 4.

[Rastanan]

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Which GPU is this exactly?

Most likely your fans are dead or dying and your GPU is throttling.

Then why does it run full guns 485 h/s when mining cryptonite ?  no problem there...only problem is equihash and claymore 12.6

What Is the make and model of your 280x ?

Try using the older 15.12 drivers and set clock to 1050/1500 or so.

I have a few 7970 (280X), I run them at 950 mV, 900/1250MHz, quite stable.

I am also running a few 7970 aka 280x, @1050/1400 1110-1150mV (depends on the specific card) and making with a modded BIOS ~300+ Sol per card. If the -i setting does nothing, then something is wrong on your side, mine 280x' run stable with i 4.

I run -i 4 or 5, quite good. little incorrect shares.

[CitricAcid]

Has anyone tried 6rig ega gpu

What?

[albertorm2]

Crashes all time with r9 280x

Im running claymore zcash with -old 1 and -i 0

Any ideas what can be causing this?

Limited the power dramatically with -li and made it to work however I'd like to know if this is normal?

Thanks

I paste my log:

05:02:01:565   27c4   args: -zpool eu1-zcash.flypool.org:3333 -zwal t1VCuQVrFwARzeg86PYPUdALYmCnnM8wCxZ -zpsw x -fanmin 90 -i 0 -mport 0 -old 1 -li 1

----


05:02:17:456   25bc   GPU #0: Tahiti
05:02:17:457   25bc   ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
05:02:17:458   25bc   ZEC: GPU0 0.000 H/s
05:02:17:458   25bc   Pool switches: ZEC - 0
05:02:17:460   25bc   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:17:461   25bc   
05:02:18:247   ea0   got 310 bytes
05:02:18:248   ea0   buf: {"id":null,"method":"mining.notify","params":["67a3c0c31735bc837a1b","04000000","ef41b2639b230a829b625e14f0e994985ab421089f8d4af053c6c80000000000","14c9a446220b05c4b0380e883d1fa0e7975149e545fb74267fcb2cde389a0d06","0000000000000000000000000000000000000000000000000000000000000000","6687b05a","59b00d1c",true]}

05:02:18:250   ea0   parse packet: 309
05:02:18:251   ea0   new buf size: 0
05:02:20:229   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:23:233   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:26:237   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:29:240   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)
05:02:32:243   27c4   Cannot get Overdrive capabilities for adapter 0 (error -1)

[Zagi91]

Hello,
i have some trouble mining ZEC with Claymore.

My Rig contains 6 RX570 4GB and runs perfect with claymore and ETH or XMR.
Only ZEC doesnt work fine.

I tried all settings with -i -asm -li ....... but nothing helps me fix my hash power.

When i start the Miner not all GPU's boosts to full frequency some stay at ~600MHz Core normaly i fixed it to 1100/2000 and this runs fine on ETH and XMR.
Max Hash Power i get on my RX570 is about 240-260 an the cards who doesnt clock right only about 60-80.

System is Windows 10 with the AMD Blockchain Driver.

Has Anybody a Idea what I can do?

[Orielres]

Hello,
i have some trouble mining ZEC with Claymore.

My Rig contains 6 RX570 4GB and runs perfect with claymore and ETH or XMR.
Only ZEC doesnt work fine.

I tried all settings with -i -asm -li ....... but nothing helps me fix my hash power.

When i start the Miner not all GPU's boosts to full frequency some stay at ~600MHz Core normaly i fixed it to 1100/2000 and this runs fine on ETH and XMR.
Max Hash Power i get on my RX570 is about 240-260 an the cards who doesnt clock right only about 60-80.

System is Windows 10 with the AMD Blockchain Driver.

Has Anybody a Idea what I can do?

For the ZEC mining, it stress the core more, so you need to reduce the frequency or increase the voltage.

[supermoew]

is it possible to mine zec by claymore with nvidia cards? and how? I didn't figured out yet.

I have 5X1060 and 1X 1080 and I want to try mine zec by claymore.

[jackbox]

is it possible to mine zec by claymore with nvidia cards? and how? I didn't figured out yet.

I have 5X1060 and 1X 1080 and I want to try mine zec by claymore.

No. Claymore for this algo is AMD only. He has said he has no intention of making this miner for Nvidia cards. I use EWBF for Nvidia and this algo.

[stealth2600]

I'm having some trouble with Claymore ZCash miner on my six Sapphire Nitro+ RX570 8GB Rig, which is running on Hive OS. I continue to receive the message GPU0 returned incorrect data! I am receiving the same message periodically for all the GPUs on this rig. I have tried lowering my intensity to 1 and I am running the cards at stock settings on the original bios. I am running on amdgpu-pro 17.40-492261 driver. I have also already tried replacing all of my riser cards twice. Can anyone offer anymore suggestions of things to try? I don't seem to have this issue when using Optiminer, so I'm not sure what's going on. Thanks for the help!

[sidscribble]

Can anyone tell me any specifics on what method Claymore uses to get gpu temps?

I'm trying to troubleshoot a 7950 reference card that recently started reporting high temps to Claymore, but aticonfig --odgt fails to retrieve temp (or clocks). Claymore gets the temperature, but the card is actually about 20C cooler than reported temps. It'll hash; and temp seems fine best I can tell with an infrared thermometer on the PCB & comparing with identical cards in the rig.

Anyone suggest a possible fix or route for troubleshooting? I've flashed original bios, i've tried down-volted and down-clocked bios and all get the same overheating results.

I can use claymore's low intensity mode (-li 50) and turn the clocks down to 850, 1000 and use -asm 2 and it'll hash at about 30 sol/sec but says it's 80C and really isn't.

[ayiphelmy]

Hai claymore maybe u can update driver for fury and 390/390x, so it can use newest driver

Thanks..

[Jatnid]

Hai claymore maybe u can update driver for fury and 390/390x, so it can use newest driver

Thanks..

Will the new driver make the mining faster for these cards?

[kristikun]

vegas hashrates ??

[Yatsida]

Hai claymore maybe u can update driver for fury and 390/390x, so it can use newest driver

Thanks..

I thought the latest driver does not have the old cards?

[Bidnant]

Ok I'm ready to burn my computer.  Someone please help me.  I have a R280X that runs Cryptonite at 485h/s and according to the charts should run Equihash around 290 h/s.  I'm running claymore 12.6 on Slushpool and when the miner starts it does 275h/s.  It then begins to throttle down in steps down to 145 h/s and sometimes lower.  I recently watch it go as low as 40 h/s before climbing back up to 145 h/s.
Does anybody know why the rates are so low, and also the -i and -il commands do nothing to the hashrate.
I'm running the "blockchain" drivers but had the same problem when running AMD 15.2.
Any ideas?
Bob

Need afterburner and set the fan speed to 64% with -25% power. At least on my 290x's. Otherwise it throttles on stock fan speeds/curves. Also slushpool is losing you money unless you dont pay for electricity, even then altcoins will bring more profit, ethereum is easy to trade for bitcoin.

I have R9 290. I run them at lower voltage and frequency so that they are profitable.