Avalon A7 announced

[rs1x]

Oh Shit - Whatever I did I can now get to the API and Status Page

API LOG - https://i.imgur.com/0Gna5ot.png
STATUS - https://i.imgur.com/F1UatGK.png

Edit: routes page - https://i.imgur.com/zpZKYK4.png
edit: overview page  https://i.imgur.com/lAQE3wz.png

[1714846706]

1714846706

[1714846706]

1714846706

[1714846706]

1714846706

[philipma1957]

Oh Shit - Whatever I did I can now get to the API and Status Page

API LOG - https://i.imgur.com/0Gna5ot.png


Edit: routes page - https://i.imgur.com/zpZKYK4.png
edit: overview page  https://i.imgur.com/lAQE3wz.png

did anything ever show in this page?

what address is your  rasp pi?

like 192.168.0.100  or something.



try  chrome browser
try  windows  whatever browser

[rs1x]

Oh Shit - Whatever I did I can now get to the API and Status Page

API LOG - https://i.imgur.com/0Gna5ot.png


Edit: routes page - https://i.imgur.com/zpZKYK4.png
edit: overview page  https://i.imgur.com/lAQE3wz.png

did anything ever show in this page?

what address is your  rasp pi?

like 192.168.0.100  or something.



try  chrome browser
try  windows  whatever browser

Parallel miner said it's configured for DHCP. I don't know that I beleive the rasp pi is.

So what I did from terminal.



Ifconfig eth0 192.168.1.125 netmask 255.255.255.0

Route add default gw 192.168.1.1 eth0

I was using Firefox. I will try chrome and I.E. 

[goose1072]

you might have to reload the software on the Rasp Pi, you can find it in one of the older post or Canaan site.
Wait until you hear back from Philip, he has more experience than I do.

[hhumaidan]

Hey guys,


I need help.


I opened several support tickets in canaan.io but no reply so far (it has been more than 2 weeks now).

I need several PMUs, 4 minimumas my A721s are not hashing due to dead PMUs error 3840 on miners boards.

Do you know where I can find them? or do you know any direct email to communicate with canaan.io?



Thanks.

[Elphamyto]

@rs1x, How is your miner's pi connected to the internet? Is it connected directly to your router or does it go to an access point?
The Routes page is missing a gateway, and cgminer's api is telling you it cannot connect to a network. That's the issue; the cause could be many things.

Parallel miner said it's configured for DHCP. I don't know that I beleive the rasp pi is.

Did Parallel miner sell you the pi? I'm wondering if you have the wrong version of OpenWrt is installed for your pi. You may just want to reflash the pi with the correct image from Canaan.

[pluMmet]

The information that is quite interesting

[rs1x]

@rs1x, How is your miner's pi connected to the internet? Is it connected directly to your router or does it go to an access point?
The Routes page is missing a gateway, and cgminer's api is telling you it cannot connect to a network. That's the issue; the cause could be many things.

Parallel miner said it's configured for DHCP. I don't know that I beleive the rasp pi is.

Did Parallel miner sell you the pi? I'm wondering if you have the wrong version of OpenWrt is installed for your pi. You may just want to reflash the pi with the correct image from Canaan.

I did get the PI from Parallel Miner.  They said it was configured with DHCP (and maybe they belive it is) but I wasn't getting assigend an IP from my router.

My network setup is :

DDWRT Router - > 6 Port Linksys SWITCH -> Raspberry PI.

Thinking that the 6 port switch was throwing off the DHCP, I plugged directly into the DD-WRT Router.  Still not getting an IP assigned.

In order to get an IP and connect to Open WRT I had to do:

Code:

Ifconfig eth0 192.168.1.125 netmask 255.255.255.0
Route add default gw 192.168.1.1 eth0

I was reading on a "blog" and there were these instructions:

Code:

In order to make the Avalon Miner 741 work, you will need to connect it via wireless network. Here’s how you do it:

    Click on Advanced Version button (left side menu), then
    Go to Network -> WiFi,
    click on Scan button,
    choose your wireless ID,
    click on Join Network button,
    enter WPA passphrase (password),
    select LAN as firewall-zone.

Click on Submit and you will be redirected to the Device Configuration
Click on Save & Apply.

Perhaps I need to try them.

OR as Elphamyto pointed out perhaps I should try to reload the PI software.


I appreciate everyone's input on trying to help me get this thing up and running!

[wavelengthsf]

I second that you reflash your Pi and set the DHCP yourself

[rs1x]

I second that you reflash your Pi and set the DHCP yourself

Is setting DHCP something that is done from terminal?  If so what command can i run - I'm not teh best Linux guy

[wavelengthsf]

I second that you reflash your Pi and set the DHCP yourself

Is setting DHCP something that is done from terminal?  If so what command can i run - I'm not teh best Linux guy

You can set it from the GUI.

After you reflash, set your PC IP address temporarily to 192.168.0.101 (and gateway to 192.168.0.1), and you should be able to access the controller at 192.168.0.100

From there login as root/root, and set DHCP in the networking. Reset your PC back to DHCP and you should be good.

You can also do it from the command line - canaan has a guide here: https://canaan.io/question/how-can-i-change-my-avalonminer-controller-or-raspberry-pi-1-2-or-3-from-default-static-ip-address-to-automatic-dhcp-ip-address/

[rs1x]

I second that you reflash your Pi and set the DHCP yourself

Is setting DHCP something that is done from terminal?  If so what command can i run - I'm not teh best Linux guy

You can set it from the GUI.

After you reflash, set your PC IP address temporarily to 192.168.0.101 (and gateway to 192.168.0.1), and you should be able to access the controller at 192.168.0.100

From there login as root/root, and set DHCP in the networking. Reset your PC back to DHCP and you should be good.

You can also do it from the command line - canaan has a guide here: https://canaan.io/question/how-can-i-change-my-avalonminer-controller-or-raspberry-pi-1-2-or-3-from-default-static-ip-address-to-automatic-dhcp-ip-address/

Thanks I will give all of this a shot tonight 

@ wavelengthsf
@ phil
@ Elphamyto
@ Steamtyme

leave me your btc or eth address for me to buy you a beer.  I appreciate all the help.

[goose1072]

Here's the link if you want to reflash: https://canaan.io/question/how-do-i-connect-an-avalonminer-721-and-avalonminer-controller-including-raspberry-pi-1-2-and-3/

Has everything you need.

[hhumaidan]

Hey guys,


New news from canaan.

A8 announced.

Email below:

We are now officially sold out of Avalon 741 for December, and will have some remaining 741  to ship in January 2018. We will contact people on the waiting list to see if they are still interested. Around the end of the month we should be able to announce the new 8 series of miners. At that time we will give out price and performance figures and a First Customer Ship date. The product will be on allocation, and looking at your forecasts it's clear that some will have to wait. We go over every account and will decide in December.  For those of you waiting to hear about the distribution program please watch for future mails. We will probably add a few new distributors in January and then more throughout the rest of the year.   

[rayday11]

Hey guys,


New news from canaan.

A8 announced.

Email below:

We are now officially sold out of Avalon 741 for December, and will have some remaining 741  to ship in January 2018. We will contact people on the waiting list to see if they are still interested. Around the end of the month we should be able to announce the new 8 series of miners. At that time we will give out price and performance figures and a First Customer Ship date. The product will be on allocation, and looking at your forecasts it's clear that some will have to wait. We go over every account and will decide in December.  For those of you waiting to hear about the distribution program please watch for future mails. We will probably add a few new distributors in January and then more throughout the rest of the year.   

FYI the URL's in the email are not from Cannan's website. Cannan's  url  is:       https://canaan.io/product/avalonminer-741/

May be a phishing attempt.

[hhumaidan]

Hey guys,


New news from canaan.

A8 announced.

Email below:

We are now officially sold out of Avalon 741 for December, and will have some remaining 741  to ship in January 2018. We will contact people on the waiting list to see if they are still interested. Around the end of the month we should be able to announce the new 8 series of miners. At that time we will give out price and performance figures and a First Customer Ship date. The product will be on allocation, and looking at your forecasts it's clear that some will have to wait. We go over every account and will decide in December.  For those of you waiting to hear about the distribution program please watch for future mails. We will probably add a few new distributors in January and then more throughout the rest of the year.   

FYI the URL's in the email are not from Cannan's website. Cannan's  url  is:       https://canaan.io/product/avalonminer-741/

May be a phishing attempt.

Hey Ray,


The email received is from steve@canaan.io

and am sure that it is true and not a phishing attempt.

[PeaMine]

Curious as well, the site redirects to http://canaan-creative.acemlnc.com/
Mail server is:
s16.avl3.acemsrvc.com and s10.avl3.acemsrvc.com
Though it says it is from Cannan.io
The link does seem similar to the last legit Google Document, odd that it serves it with such an odd link from an unknown domain.

[Steamtyme]

It seems very similar to the last email blast they sent out, except that one was for 741's I believe; and what farms/distributors/re sellers anticipated needing. This one seems to be just relating to the new 8 series and what your requirements would be for all the same categories.

Really though anyone who is worried could hold off a day or two before filling out the form, as I'm sure Steve or the Canaan crew would pretty quickly get the word out if this is a Phishing email.

[jimmy_007vn]

I need Canaan step up and replace my AUC3s. My miner sit stone cold for 2 weeks since i got it. Poor product

[rs1x]

I'm still not having much luck.

Routes Page:
https://i.imgur.com/c638XiL.png

Can someone confirm that looks like it's close to working.  

I have assigned the RaspPi a static IP address - and that seems to be working okay.  Can't seem to get the Avalon to show in the miner.


Log:
https://i.imgur.com/fShuufX.png

Status Page:
https://i.imgur.com/DSEBdEK.png


I feel like I have to be damn close.

Edit:
This is from system log.  These errors don't look good
https://i.imgur.com/5R9TdUi.png