EWBF's CUDA Zcash miner

[Lookingfordarkskys]

Here are some stats from my 9 MSI Geforce GTX 1080Ti gamer x 11G card rig.

Today I'm finishing with Core 150 Memory -250 Power 200 Temp 75 Fan 70.
Total Sols about 6340 and 3.89Sols/w Total watts 1622 or around 180 watts and 720 Sols per card.
I can get them a bit higher but my settings in the garage aren't completely set up yet so they get a little hot for my liking. Fresh air is the next item on the list. I'm hoping they'll last a little longer if I'm not asking too much from them.

200w Power or 180w ?

In the overclock page of SMOS you can put in a power setting and I'm finding that when you look at the api stats page it's running just a bit less than what I put in. In fact I see that the power used by each card fluctuates a bit depending on stability I'm guessing. They are never all running at the same power, speed or efficiency at the same time. Very dynamic. When I'm putting in settings on that page you are essentially guessing on the outcome. You put in a few numbers and restart the miner than watch a while for stability issues. I can't be anywhere as nice as having full operating system with the ability to run the MSI afterburner tool and seeing how any setting affects another in real time. I had to restart the miner about 2 dozen times (slow learner) before I was happy with it. A few extra hard resets just because a card would completely crash. It was pretty cool to watch one go down. I'm sure that's not good but I wasn't in a hurry today for once.

A little bit of work to get things the way I think they should be but with SMOS and EWBF together on a bootable USB is really handy. No hard drive and no messing around with anything else. Just turn it on and it's mining.

Sorry, long story short,

The setting was 200 and the results hovered around 180 give or take 10.

[jpl]

.. question... are these edits to the config?.. and/or should I edit the config?  Or just put my ether wallet in and my location per .bat file.



{I will mine Zcah (ZEC) on this pool:

http://zcah.flypool.org/

My start file is like this:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
miner
--server eu1-zcash.flypool.org
--port3333
--user .........
--pass x}

thx..  its from a vid on the web.. I'm still not sure if I should edit the config file or not.

[Lion BItcoin Shop]

anyone know how to setting fan to max level?
im use linux server, i dont have msi afterburner too hard to setting it, please help guys

[GreenDust]

Especially in a free product


The pool needs to find a block before paying you.

What makes you think it's a free product? Are you paying a 2% dev fee?

[Lion BItcoin Shop]

anyone know how to setting fan to max level?
im use linux server, i dont have msi afterburner too hard to setting it, please help guys

anyone can help?

[Lookingfordarkskys]

.. question... are these edits to the config?.. and/or should I edit the config?  Or just put my ether wallet in and my location per .bat file.



{I will mine Zcah (ZEC) on this pool:

http://zcah.flypool.org/

My start file is like this:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
miner
--server eu1-zcash.flypool.org
--port3333
--user .........
--pass x}

thx..  its from a vid on the web.. I'm still not sure if I should edit the config file or not.

Here's a file on my config 
--server us1-zcash.flypool.org --user t1YKmBVzpyMDftLvr6fdURKgHQiF.$rigName --pass x --port 3333 --api 0.0.0.0:42000

You can see that I added my Zcash wallet after the user command (you'll change it to yours). there is also a rig command that puts the rig name on your flypool worker page (I think you can use this as is). I also added the --api command so I can pull statistics for the rig from wherever I am online from a browser (love that one).

Good luck.

[QuintLeo]

anyone know how to setting fan to max level?
im use linux server, i dont have msi afterburner too hard to setting it, please help guys

https://bitcointalk.org/index.php?topic=1854250.msg21877683#msg21877683

 among other sources here.

[pfft]

Any one can help me why from 2 gpu i get lower hashrate... ?
http://tinypic.com/view.php?pic=209ituf&s=9#.WccJ8tFRWUk

[clumsyzombie]

I was wondering I am trying to learn API.
You know this has the API stuff for http://127.0.0.1:42000/getstat

Is there away to get that info and make your own charts out of it.

Would it be best to have a script that runs every 10 to 20 sec and then takes the data and places it into a mysql table? Or what would bee thee best way to have historic data saved from http://127.0.0.1:42000/getstat so it can be placed in charts you can show like daily weekly monthly yearly of power and all that..

Was wondering if someone could point me in a good direction. Trying to learn at scripting and all that I am a basic php / html guy still learning all other stuff.

[Ionico]

Hi guys! Need some help setting up my miner. I have a 4 GPU 1060 6GB rig, running on windows 10 64bit.

I have downloaded the miner and setup my bat file. When I try to run the miner I get this error message in red: ERROR : No deviced detected.

Can anyone help out?

This is what my bat file looks like:
 miner.exe --server eu1-zcash.flypool.org --user t1bWQxiUrDhPYBxZtsJyYy15JNiMofysURP

[jpl]

Here's a file on my config
--server us1-zcash.flypool.org --user t1YKmBVzpyMDftLvr6fdURKgHQiF.$rigName --pass x --port 3333 --api 0.0.0.0:42000

Thanks!  Mine looks the same on my end,. I guess I just need to let it run a bit to see results.  Btw.. you have the $ sign before your rig name... what is that?  String for anything?

[davidadrake]

Hi guys! Need some help setting up my miner. I have a 4 GPU 1060 6GB rig, running on windows 10 64bit.

I have downloaded the miner and setup my bat file. When I try to run the miner I get this error message in red: ERROR : No deviced detected.

Can anyone help out?

This is what my bat file looks like:
 miner.exe --server eu1-zcash.flypool.org --user t1bWQxiUrDhPYBxZtsJyYy15JNiMofysURP

It's not a problem with the software. It probably means your drivers are not installed, or you just need to reboot

[joshuajones02]

Hi guys! Need some help setting up my miner. I have a 4 GPU 1060 6GB rig, running on windows 10 64bit.

I have downloaded the miner and setup my bat file. When I try to run the miner I get this error message in red: ERROR : No deviced detected.

Can anyone help out?

This is what my bat file looks like:
 miner.exe --server eu1-zcash.flypool.org --user t1bWQxiUrDhPYBxZtsJyYy15JNiMofysURP

Check your device manager man, make sure they are recognized by windows and the drivers are properly installed


(Right click on the start button -> device manager, and then look under "display adapters")

you should see your 4 GTX 1060s, if you don't then thats the reason why youre getting that message.

To troubleshoot this, turn off your computer unplug them all but one and then get back in, reinstall your drivers, and then reboot and see if you can get your miner running for the 1 before you add the other 3. Once you got it working, turn it off and add 1 more in and see if windows recognizes it in your device manager, repeat this until all four are connected

[joshuajones02]

Any one can help me why from 2 gpu i get lower hashrate... ?
http://tinypic.com/view.php?pic=209ituf&s=9#.WccJ8tFRWUk

You shouldn't be overclocking memory when using this miner/algo. Turn that shit all the way to -502, the core clock is whats going to add Sols/s

[UnknownX]

2Ionico
Just setup GPU drivers correctly and everything will be fine.

[pfft]

Any one can help me why from 2 gpu i get lower hashrate... ?
http://tinypic.com/view.php?pic=209ituf&s=9#.WccJ8tFRWUk

You shouldn't be overclocking memory when using this miner/algo. Turn that shit all the way to -502, the core clock is whats going to add Sols/s

But on my first rig i got same win same gpus and it`s working well...
http://i66.tinypic.com/2weknzd.jpg

[Debonaire]

Hello!
Tell me, please, does new miner give more H/s on 1080ti? Does it work stably? What does mean the 2% fee, was it in the previous version of miner? Thx.

[QuintLeo]

3.4 seems to give a little more hashrate on the 1080ti than 3.3, but my testing on both was not extensive.
It's been quite stable for me so far on my mix of various 1070, 1080, and pair of 1080ti models.
It's always had a fee, which unlike Claymore is configureable as more than "on, or off and lose some optimisation and hashrate".

[Lookingfordarkskys]

Here's a file on my config
--server us1-zcash.flypool.org --user t1YKmBVzpyMDftLvr6fdURKgHQiF.$rigName --pass x --port 3333 --api 0.0.0.0:42000

Thanks!  Mine looks the same on my end,. I guess I just need to let it run a bit to see results.  Btw.. you have the $ sign before your rig name... what is that?  String for anything?

If you just leave it .$rigName It will automatically insert your rig name. Guessing that if you have several rigs you don't need to change the file. I only have one for now so I'll have to wait until I get the next one up.

[tf2addict]

I'm only getting 602 H/s from a 8GB 1070 and 4GB 1060.  I was expecting more like 670ish.  WhatToMine says 700 but that's with an 8GB 1060.

The 1070 is doing 339 H/s and the 1060 261 H/s.