rex9
Member
Offline
Activity: 112
Merit: 10
|
|
October 30, 2017, 11:01:12 AM |
|
I've got relatively pricey electricity. Curious what people have found as the sweet spot between sols and power consumption.
For example, I'm hitting about 400sols for a gtx 1070 at a power limit of about 68 percent. Getting the extra 50-60 something sols for 30 percent extra electricity consumption is not worth it for me.
Anyone getting a better balance?
For all of the 1070 models I've worked with, 110-120 watts seems to be the "knee" where sol/s starts dropping off fast with TDP limit. This is going to VARY as a "percent" figure because the factory default TDP of 1070 models varies WIDELY - the lower-end ones like the FE and the Gigabyte ITX/Zotac Mini/MSI Aero Mini are 151 watts, many higher-end models are 180, and there is one MSI model with 2 power connectors and an official TDP of 240 watts (higher than most 1080 models and VERY VERY CLOSE to many 1080ti models). "80% TDP" on a Zotac Mini is the SAME power level (give or take a fractional watt) as "50% TDP" on that MSI gaming model. This issue also applies to GTX 1080 cards to some degree, and I believe there are GTX 1080ti cards that do not have the same default TDP as the FE cards do but I have not seen one to date. Sweet spot on the GTX 1080 ti models I've worked with seems to be between 175 and 200 watts, very close to 4 sol/s in that entire range and doesn't start dropping off fast 'till somewhere a bit over 200 watts - but my sample size there is small, 2 "base" model Aorus and a Windforce. Thanks for your advice
|
|
|
|
majorlee
Full Member
Offline
Activity: 134
Merit: 100
First DJ to play gigs for Bitcoin & Crypto Guru
|
|
October 30, 2017, 08:37:51 PM |
|
anyone having issues with latest nvidia drivers?
|
|
|
|
InvisibleNinja
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 31, 2017, 12:42:13 AM |
|
INFO 20:25:28: GPU0 Accepted share 141ms [A:48, R:0] \\ if this shows up does that mean i got 48 shares or just one
|
|
|
|
ZukoS
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 31, 2017, 04:13:54 AM |
|
How to use network proxy to connect to pool on Linux?
|
|
|
|
jpl
Member
Offline
Activity: 154
Merit: 11
|
|
October 31, 2017, 04:29:58 AM |
|
anyone having issues with latest nvidia drivers?
Version 388.00 for GTX 1070 working fine.
|
|
|
|
shibob
Full Member
Offline
Activity: 672
Merit: 154
Blockchain Evangelist.
|
|
October 31, 2017, 05:23:56 AM |
|
anyone having issues with latest nvidia drivers?
Version 388.00 for GTX 1070 working fine. Any improvement on hashrate with driver ver.388.00?
|
|
|
|
anyreason.ua
Newbie
Offline
Activity: 9
Merit: 0
|
|
October 31, 2017, 01:57:10 PM |
|
How can I remove reconnecting to pool after "connection lost" message ?
|
|
|
|
ArtPt
Member
Offline
Activity: 61
Merit: 10
|
|
October 31, 2017, 01:59:42 PM |
|
Good miner. All my 1060/1080 cards works like a charm at pretty decent speed. Thanks to the dev!
|
|
|
|
mrok
Newbie
Offline
Activity: 45
Merit: 0
|
|
October 31, 2017, 03:48:48 PM |
|
it works well for me, great job dev!
|
|
|
|
Southy
Newbie
Offline
Activity: 23
Merit: 0
|
|
October 31, 2017, 04:49:33 PM |
|
Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
October 31, 2017, 09:25:30 PM |
|
Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.
There is no way to know for 100% sure before it's tried - but there is also no reason to believe that this miner won't work well on the 1070 ti, since there are no major changes in the basic architecture of the GPU that would cause issues. Ask again in about a week, when folks that pre-ordered 1070ti start getting their cards and have a chance to put them in machines.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
October 31, 2017, 10:17:58 PM |
|
INFO 20:25:28: GPU0 Accepted share 141ms [A:48, R:0] \\ if this shows up does that mean i got 48 shares or just one
IT MEANS YOU HAVE A RUNNING TOTAL OF 48 SHARES FROM GPU0-- You have just been credited for your 48th share, with no rejects. The "A" stands for "Accepted", the "R" stands for "Rejected", and they both represent the current total for each, respectively, found by GPU0. --scryptr
|
|
|
|
jpl
Member
Offline
Activity: 154
Merit: 11
|
|
November 01, 2017, 02:57:57 AM |
|
anyone having issues with latest nvidia drivers?
Version 388.00 for GTX 1070 working fine. Any improvement on hashrate with driver ver.388.00? My rate is higher, but I'm not sure if it's my settings in Afterburner or not,.. since I'm messing with that a lot. .. ok testing still... Afterburner core 0 power limit 102 temp limit 74 (ewbf say's 68C and one higher at 71C and it's text is orange, so I don't think I'll go higher) core clock 155 mem clock 660 fan is at 59 1917 Sols/s with 4 1070's now
|
|
|
|
ljconstructionpa
|
|
November 01, 2017, 03:17:07 AM |
|
how do i get the power usuage of gpu to display?
|
|
|
|
Kstudio
Newbie
Offline
Activity: 40
Merit: 0
|
|
November 01, 2017, 03:43:24 AM |
|
Has anyone been able to contact ewbf?
|
|
|
|
|
GustETH
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 01, 2017, 09:53:58 AM |
|
since yesterday I have seen that my rigs have stopped working, stop recognizing 1 gpu (rig 6 x 1070) and in the EWBF the NVML error appears. Temperature monitor will not work! CUDA: Sevice: 0 Thread exited with code: 46
Could it be some windows update? Someone has been the same? please help - sorry for my enghish
|
|
|
|
SantoMacias
Newbie
Offline
Activity: 10
Merit: 0
|
|
November 01, 2017, 04:15:37 PM |
|
My problem started 30 minutes ago. I have this error: Stratum suscribe timeout
|
|
|
|
Southy
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 01, 2017, 05:00:48 PM |
|
Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.
There is no way to know for 100% sure before it's tried - but there is also no reason to believe that this miner won't work well on the 1070 ti, since there are no major changes in the basic architecture of the GPU that would cause issues. Ask again in about a week, when folks that pre-ordered 1070ti start getting their cards and have a chance to put them in machines. Thank you appreciate it.
|
|
|
|
wudafuxup
|
|
November 01, 2017, 05:46:34 PM |
|
Could anyone tell me if the EWBF miner will be ok with the new Nvidia GTX 1070 Ti if ill have any problems with this miner and the card since its new not sure how that works, was going to try a few for a rig and i use this miner does anyone know if there will be any problems or consdering its like the same as the 1070 if it will be ok, would really apprecaite the help thank you.
The card should be fine. It simply has more cuda cores and different frequency ranges. The memory will remain GDDR5 just like the 1060 and 1070 (won't have the GDDR5X the 1080 and 1080ti have).
|
I like crypto
|
|
|
|