zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 31, 2017, 01:40:03 AM |
|
Is there something specific in the ASM that requires modification for linux?
There is a Linux specific requirement, unfortunately. It turned out the most recent kernel optimization requires MORE work. *sigh* So, I will just set it aside for now and prepare the assembly version for Linux now.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 31, 2017, 01:51:20 AM |
|
I just tried v3 and I can only seem to get 220 on my 390, 200 on my 290, and both 280 and 270 where lower but sgminer is only building a bin for my Hawaii I tried choosing just the 270 with -d 0 and it still just build hawaii bin
Are you using Linux? The assembly kernel is not ready for Linux yet.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
FFI2013
|
|
January 31, 2017, 02:09:51 AM |
|
I just tried v3 and I can only seem to get 220 on my 390, 200 on my 290, and both 280 and 270 where lower but sgminer is only building a bin for my Hawaii I tried choosing just the 270 with -d 0 and it still just build hawaii bin
Are you using Linux? The assembly kernel is not ready for Linux yet. no win 10 pro
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 31, 2017, 02:20:22 AM |
|
I just tried v3 and I can only seem to get 220 on my 390, 200 on my 290, and both 280 and 270 where lower but sgminer is only building a bin for my Hawaii I tried choosing just the 270 with -d 0 and it still just build hawaii bin
Are you using Linux? The assembly kernel is not ready for Linux yet. no win 10 pro Wait, are you using sgminer with GG's kernel? That wouldn't work.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
joaocha
|
|
January 31, 2017, 02:40:49 AM |
|
There is a moded version of sg miner that mine pascal, maibe you can quick add
|
|
|
|
FFI2013
|
|
January 31, 2017, 03:12:03 AM |
|
I just tried v3 and I can only seem to get 220 on my 390, 200 on my 290, and both 280 and 270 where lower but sgminer is only building a bin for my Hawaii I tried choosing just the 270 with -d 0 and it still just build hawaii bin
Are you using Linux? The assembly kernel is not ready for Linux yet. no win 10 pro Wait, are you using sgminer with GG's kernel? That wouldn't work. no im using your latest 1.3 version sorry i just called it sgminer
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 31, 2017, 09:34:34 AM |
|
There is a moded version of sg miner that mine pascal, maibe you can quick add It took me about 5 minutes to add it. Let's see if this actually works...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
January 31, 2017, 09:52:03 AM |
|
Does it work?
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
ghostfaceuk
|
|
January 31, 2017, 11:33:45 AM |
|
There is a moded version of sg miner that mine pascal, maibe you can quick add It took me about 5 minutes to add it. Let's see if this actually works... Did it work zawawa?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 31, 2017, 11:49:50 AM |
|
Nope, not yet. Almost there, though.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
FFI2013
|
|
January 31, 2017, 12:43:53 PM |
|
Nope, not yet. Almost there, though.
for some reason Hawaii is only getting a bin in GC and I tried genoil eth miner it sees all gpus put only build a dag or bin in GC for my hawaii do you think I should reinstall drivers
|
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
February 01, 2017, 03:05:51 AM |
|
A quick update:
(1) I decided to give llvm a shot because dealing with tens of thousands of disassembled codes is just too much. (2) PASC mining is working now. (3) The next version will be ready in a day or two.
I will be really busy for the next few days, but I will keep you guys posted.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
ghostfaceuk
|
|
February 01, 2017, 08:54:23 AM |
|
A quick update:
(1) I decided to give llvm a shot because dealing with tens of thousands of disassembled codes is just too much. (2) PASC mining is working now. (3) The next version will be ready in a day or two.
I will be really busy for the next few days, but I will keep you guys posted.
I cant get the pascal mining to work. I use gatelessgate.exe -k pascal but get only hw errors and rejects. I get the feeling I'm doing something completely stupid and missing the obvious. can anyone help please?
|
|
|
|
ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
February 01, 2017, 08:59:05 AM |
|
He said he will do it the next days it is not yet implemented in the repo as far as I would interpret his post.
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
ghostfaceuk
|
|
February 01, 2017, 09:05:17 AM |
|
He said he will do it the next days it is not yet implemented in the repo as far as I would interpret his post.
thanks. I really should have more coffee on a morning before reading these messages lol
|
|
|
|
laik2
|
|
February 01, 2017, 09:15:57 AM |
|
He said he will do it the next days it is not yet implemented in the repo as far as I would interpret his post.
Pascal kernel is working fine on my RX 480s (5s):3.685G (avg):3.680Gh/s | A:2542 R:0 HW:0 WU:50.389/m GPU 0: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:10.323/m I:21 GPU 1: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:8.755/m I:21 GPU 2: | 730.6M/730.0Mh/s | R: 0.0% HW:0 WU:11.102/m I:21 GPU 3: | 730.4M/730.4Mh/s | R: 0.0% HW:0 WU:11.061/m I:21 GPU 4: | 730.5M/729.9Mh/s | R: 0.0% HW:0 WU:9.716/m I:21 -------------------------------------------------------------------------------- [11:07:37] Accepted 0d945206 Diff 18.85/9.034 GPU 3 at Suprnova Pascal [11:07:46] Accepted 133ab1b3 Diff 13.31/9.034 GPU 1 at Suprnova Pascal [11:07:49] Accepted 0bdfb339 Diff 21.56/9.034 GPU 0 at Suprnova Pascal
|
|
|
|
ghostfaceuk
|
|
February 01, 2017, 09:20:27 AM |
|
He said he will do it the next days it is not yet implemented in the repo as far as I would interpret his post.
Pascal kernel is working fine on my RX 480s (5s):3.685G (avg):3.680Gh/s | A:2542 R:0 HW:0 WU:50.389/m GPU 0: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:10.323/m I:21 GPU 1: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:8.755/m I:21 GPU 2: | 730.6M/730.0Mh/s | R: 0.0% HW:0 WU:11.102/m I:21 GPU 3: | 730.4M/730.4Mh/s | R: 0.0% HW:0 WU:11.061/m I:21 GPU 4: | 730.5M/729.9Mh/s | R: 0.0% HW:0 WU:9.716/m I:21 -------------------------------------------------------------------------------- [11:07:37] Accepted 0d945206 Diff 18.85/9.034 GPU 3 at Suprnova Pascal [11:07:46] Accepted 133ab1b3 Diff 13.31/9.034 GPU 1 at Suprnova Pascal [11:07:49] Accepted 0bdfb339 Diff 21.56/9.034 GPU 0 at Suprnova Pascal What are you using in your bat file? I have set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTs=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 gatelessgate.exe -k pascal --gpu-threads 2 --gpu-platform 0 -o stratum+tcp://pasc.suprnova.cc:5279 -u xxxx.xxx -p x -I 21,21 -w 64,64 -g2
|
|
|
|
laik2
|
|
February 01, 2017, 09:21:52 AM |
|
He said he will do it the next days it is not yet implemented in the repo as far as I would interpret his post.
Pascal kernel is working fine on my RX 480s (5s):3.685G (avg):3.680Gh/s | A:2542 R:0 HW:0 WU:50.389/m GPU 0: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:10.323/m I:21 GPU 1: | 746.2M/746.4Mh/s | R: 0.0% HW:0 WU:8.755/m I:21 GPU 2: | 730.6M/730.0Mh/s | R: 0.0% HW:0 WU:11.102/m I:21 GPU 3: | 730.4M/730.4Mh/s | R: 0.0% HW:0 WU:11.061/m I:21 GPU 4: | 730.5M/729.9Mh/s | R: 0.0% HW:0 WU:9.716/m I:21 -------------------------------------------------------------------------------- [11:07:37] Accepted 0d945206 Diff 18.85/9.034 GPU 3 at Suprnova Pascal [11:07:46] Accepted 133ab1b3 Diff 13.31/9.034 GPU 1 at Suprnova Pascal [11:07:49] Accepted 0bdfb339 Diff 21.56/9.034 GPU 0 at Suprnova Pascal What are you using in your bat file? "profiles": [ { "name": "pasc", "algorithm": "pascal", "intensity": "21", "worksize": "64", "gpu-threads": "2" } ],
|
|
|
|
ioglnx
Sr. Member
Offline
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
|
|
February 01, 2017, 10:01:35 AM |
|
Well looks like the linux build? I couldn't find the windows build on the release page ... no he mentioned it that way. his last post sounds like its not yet done.
Anyway good to know it works for you
|
GTX 1080Ti rocks da house... seriously... this card is a beast³ Owning by now 18x GTX1080Ti :-D @serious love of efficiency
|
|
|
|