UnclWish
|
|
November 06, 2017, 10:43:14 PM Last edit: November 06, 2017, 11:26:20 PM by UnclWish |
|
Not working Message shown Unable to load DLL 'SQLite.Interop.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) GGS 0.0.4-0.0.6 the same trouble. Win 10 x64
I just uploaded a new version with a fix for this issue. https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.7-alphaIt also displays the elapsed time and has check boxes for enabling/disabling devices. Enjoy! Thanks! Let's try it now! Hope you will continue to develope GGS... P.S. I think that problem with 570 and 470 is because they have 4Gb memory. With 32 globalworksize miner use more than 4Gb videomemory. So if 480 or 580 will have 4Gb vmemory GGS will fail to start. You must set globalworksize not only for name of GPU but it's need to determine size of vmemory and if it 8Gb than set to 32 if 4Gb than 28. I don't have 470/570 to test optimal size of globalwork. But 470/570 have 32 CU isn't it. So 28*32 = 896. 4Gb will be enough I think. 16 too low even for 4Gb. P.P.S. It's a misspelling in main window: "Curren r Algorithm". Must be "Current" I think. And it not shows anything while mining monero. And nicehash info didn't work still. And avarage speeds for last 1min/1hour/all time from start will be much useful. In log no time stamp and still stay periodical error: Exception: Bxoднaя cтpoкa имeлa нeвepный фopмaт. в System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt) в GatelessGateSharp.MainForm.UpdateStatsWithLongPolling()In MainForm.cs you forgot to change version from 0.0.6 to 0.0.7 therefore in main window showed version 0.0.6 alpha.
|
|
|
|
hagbase
|
|
November 06, 2017, 11:13:31 PM |
|
Thanks for new version, miner still closes on devfee with 17.11.1 DDU'ed 17.11.1 in safe mode and installed Blockchain Aug 23 and tried with stock settings(1150/1750 RX580 \ 1100/1750 all RX570). Mines DevFee than close/exit if miner tries to switch to pool(nicehash).
|
|
|
|
Max Hatchett
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 06, 2017, 11:17:14 PM |
|
Just checked the new version, and same issue there: miner shuts down after switching from mining devfee (cryptonite on nicehash). This happen on all my rigs. It only works if I leave a few GPU’s unchecked on main screen. On my tests it only works on up to 5-GPU’s. 6,7,8-GPU configuration doesn’t works. Tested on 5 rigs with AMD RX480/RX580/RX570 using blockchain beta drivers, and crimson 17.7.2 drivers, but same miner behavior, it just limit you to up to 5-GPUs on Cryptonite algo. Seems that Ethereum on Nicehash pool has no this issue – all GPU’s are usable
|
|
|
|
scryptr
Legendary
Offline
Activity: 1796
Merit: 1028
|
|
November 07, 2017, 12:43:06 AM |
|
MINER ERRORS OUT AFTER DEVFEE COLLECTED--
My 1080ti mines for the DevFee, then GG Sharp errors out. The screen goes black, and the nVidia driver (85.69) recovers. I run Win 7 x64 on this box, my work computer. I uninstalled the previous version of GG Sharp (v. 004) prior to installing your bugfix release. Also, the bugfix release reports itself as v. 006.
A bit off topic, but I installed Linux Excavator on a rig, and it works. Should I uninstall it (v1.31a) with "dpkg" prior to installing a newer version? Waiting for the Linux release!
And, thanks. You are welcome to a few minutes of XMR hash on NiceHash. --scryptr
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 02:02:09 AM |
|
Sorry about the bug. What a headache... A fix is coming!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 12:11:40 PM |
|
For some strange reason, this thread was locked for a while. It should be OK now.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
November 07, 2017, 12:26:05 PM |
|
For some strange reason, this thread was locked for a while. It should be OK now.
Thanks for an update! Rejected shares after receiving new job became much less often than before. But sometimes appears... 1 per GPU in 2-3 hours. All other is still the same as I sad before. Please read my previous message. And strange situation happens sometimes. 1 of GPUs start to find a half amount of shares. My GPU's is identical but different manufactures. It's about 5% speed diference between them. But sometimes 1 of GPU (each time differs) become to find only a half amount of shares. F.e., 1st GPU for 2 hours finded 25 shares, 2nd only 12-13. In logs nothing unusual. Restarting GGS in this case helps.
|
|
|
|
thesaltonsea
Newbie
Offline
Activity: 64
Merit: 0
|
|
November 07, 2017, 12:54:33 PM |
|
Hi, i have problem with one of my rigs , 4x 1060 , when i try to start the app i get "Unable to load SQLite.Interop.dll" See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.DllNotFoundException: Unable to load DLL 'SQLite.Interop.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) at System.Data.SQLite.UnsafeNativeMethods.sqlite3_config_none(SQLiteConfigOpsEnum op) at System.Data.SQLite.SQLite3.StaticIsInitialized() at System.Data.SQLite.SQLiteLog.Initialize() at System.Data.SQLite.SQLiteConnection..ctor(String connectionString, Boolean parseViaFramework) at GatelessGateSharp.MainForm.UpdateDatabase() at GatelessGateSharp.MainForm.MainForm_FormClosing(Object sender, FormClosingEventArgs e) at System.Windows.Forms.Form.OnFormClosing(FormClosingEventArgs e) at System.Windows.Forms.Form.WmClose(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.7.2110.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll ---------------------------------------- GatelessGateSharp Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/Program%20Files/Zawawa%20Software%20LLC/Gateless%20Gate%20Sharp/GatelessGateSharp.exe ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.7.2110.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.7.2110.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.7.2053.0 built by: NET47REL1 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.7.2053.0 built by: NET47REL1 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.7.2106.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.7.2102.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Data.SQLite Assembly Version: 1.0.105.2 Win32 Version: 1.0.105.2 CodeBase: file:///C:/Program%20Files/Zawawa%20Software%20LLC/Gateless%20Gate%20Sharp/System.Data.SQLite.DLL ---------------------------------------- System.Data Assembly Version: 4.0.0.0 Win32 Version: 4.7.2102.0 built by: NET47REL1LAST CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll ---------------------------------------- System.Transactions Assembly Version: 4.0.0.0 Win32 Version: 4.7.2053.0 built by: NET47REL1 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll ----------------------------------------
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
For example:
<configuration> <system.windows.forms jitDebugging="true" /> </configuration>
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 01:28:55 PM |
|
Hi,
i have problem with one of my rigs , 4x 1060 , when i try to start the app i get "Unable to load SQLite.Interop.dll"
Did you try Version 0.0.8 alpha?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 01:33:49 PM |
|
And strange situation happens sometimes. 1 of GPUs start to find a half amount of shares. My GPU's is identical but different manufactures. It's about 5% speed diference between them. But sometimes 1 of GPU (each time differs) become to find only a half amount of shares. F.e., 1st GPU for 2 hours finded 25 shares, 2nd only 12-13. In logs nothing unusual. Restarting GGS in this case helps.
Other issues are easy to address, but this one actually concerns me. There were strange intermittent bugs with the OpenCL binding of C# caused by garbage collection. I will review the codes one more time.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
thesaltonsea
Newbie
Offline
Activity: 64
Merit: 0
|
|
November 07, 2017, 02:27:26 PM |
|
Hi,
i have problem with one of my rigs , 4x 1060 , when i try to start the app i get "Unable to load SQLite.Interop.dll"
Did you try Version 0.0.8 alpha? Yes on the latest 0.0.8 , one of the rig with nvidia 1060 is ok and mining, second again with same 1060 getting this error, windows 10 64bit on both
|
|
|
|
Raimy
Member
Offline
Activity: 140
Merit: 10
★777Coin.com★ Fun BTC Casino!
|
|
November 07, 2017, 04:55:13 PM |
|
I am having trouble inputting a Monero address, tried both an exchange address and two different addresses from my own wallet, but it keeps popping an error saying "Please enter a valid Monero address".
Also, I was testing this overnight and NiceHash went down and the miner crashed. It should have a restart mechanism in place for this type of event. I didn't have a backup pool though because of the above Monero address issue.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 06:58:51 PM |
|
I am having trouble inputting a Monero address, tried both an exchange address and two different addresses from my own wallet, but it keeps popping an error saying "Please enter a valid Monero address".
Also, I was testing this overnight and NiceHash went down and the miner crashed. It should have a restart mechanism in place for this type of event. I didn't have a backup pool though because of the above Monero address issue.
Please PM me your Monero address.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
hughson
|
|
November 07, 2017, 10:39:45 PM |
|
I am having trouble inputting a Monero address, tried both an exchange address and two different addresses from my own wallet, but it keeps popping an error saying "Please enter a valid Monero address".
Also, I was testing this overnight and NiceHash went down and the miner crashed. It should have a restart mechanism in place for this type of event. I didn't have a backup pool though because of the above Monero address issue.
Please PM me your Monero address. I'm also having trouble with Monero Address. but I'm not sure of what format to use to mine direct to exchange. I was trying ADDRESS.PAYMENT-ID. Tried a few different pools(Nanopool and minexmr.com)
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 07, 2017, 10:55:44 PM |
|
I am having trouble inputting a Monero address, tried both an exchange address and two different addresses from my own wallet, but it keeps popping an error saying "Please enter a valid Monero address".
Also, I was testing this overnight and NiceHash went down and the miner crashed. It should have a restart mechanism in place for this type of event. I didn't have a backup pool though because of the above Monero address issue.
Please PM me your Monero address. I'm also having trouble with Monero Address. but I'm not sure of what format to use to mine direct to exchange. I was trying ADDRESS.PAYMENT-ID. Tried a few different pools(Nanopool and minexmr.com) That explains it. l will fix it today.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 08, 2017, 01:34:12 PM |
|
Hi,
i have problem with one of my rigs , 4x 1060 , when i try to start the app i get "Unable to load SQLite.Interop.dll"
This will be fixed in the next version.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
November 08, 2017, 08:16:18 PM |
|
In version 0.0.8 sometimes (1-2 in 3-4 hours) rejected share this version:
Share rejected: Duplicate share.
What's this?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 09, 2017, 07:21:20 PM |
|
Gateless Gate Sharp 0.0.9 alpha https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.9-alpha* Added the "Device Settings" tab page. You can adjust the number of threads, intensity, and local work size for each GPU. * Added a watchdog process named GatelessGateSharpMonitor.exe. It monitors the miner and automatically restarts it when it unexpectedly shuts down. * The miner now automatically resumes mining after unexpected shut downs. * Various improvements and bug fixes. All the known bugs should be gone. Please do share optimal settings for your cards. Enjoy!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
antantti
Legendary
Offline
Activity: 1176
Merit: 1015
|
|
November 09, 2017, 08:20:59 PM |
|
R9 390 -t 2 -i 19 -w 8 matches claymore minerside and shares are accepted on nicehash. Not bad for an alpha )).
|
|
|
|
|