glebk
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 03, 2018, 08:48:27 PM |
|
Pls, Zawawa think 'bout the interface: you really need not to have Start/Stop button at every page. Just for RX470/480 we may need this button at the first page, here: https://s5.postimg.org/rijfmusd3/screenshot_3207.pngBcause we never see the bottom of the miner, really, without any monitor at these rigs. Right now I have to click the first page, then press "Shift-Tab" and "Enter" to Start or Stop mining.
|
|
|
|
glebk
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 03, 2018, 09:02:00 PM |
|
I tried to increase GPU voltage, it's helps on neoscrypt for sometime. Thread hangs not so quick, but on cryptonight it didn't helps at all. I use lowered clocks for my 580 cards. I use 1245MHz GPU clock. Lowering it decreases speed - and this is not good for me.
Increasing the voltage works well but it's not so good assuming ^2 power usage, so at home I can only lower MHz at GPU and mem. Ye, decreasing speed this way.
|
|
|
|
UnclWish
|
|
January 03, 2018, 09:44:51 PM |
|
I tried to increase GPU voltage, it's helps on neoscrypt for sometime. Thread hangs not so quick, but on cryptonight it didn't helps at all. I use lowered clocks for my 580 cards. I use 1245MHz GPU clock. Lowering it decreases speed - and this is not good for me.
Increasing the voltage works well but it's not so good assuming ^2 power usage, so at home I can only lower MHz at GPU and mem. Ye, decreasing speed this way. On cryptonight increasing voltage didn't work. I tried up to 1000mV with the same 1245Mhz vcore. On 17.11.4 card stable works with 1245MHz and 950mV. I stop it, becase I don't want to lose speed or inrease power consumption and temp. I'll wait while zawawa take full control on 17.12.x drivers, or AMD release new version. If it didn't helps in future, I'll return to 17.11.4 driver.
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
January 03, 2018, 11:09:51 PM |
|
hello i see you have rx580 and you can get very high hash in cryptonight i have rx570 but i get only 650 hash how do you get that? tyvm sorry for my english valerio
Hi sorry, for late answer.. i am busy nowadays... All my cards are 8 GB ..And bioses are custom modded (I am modding them), but you can use , these bioses ,( they are also very good if you dont want edit manually ): https://anorak.tech/c/downloads Just register an account to download rom files.. (according to your card manufacturer (saphire,powercolor,msi etc) and memory module brand (samsung/elpida/micron etc) download the correct bios for 4 GB !! and after bios mod : with Gateless gate device-->cyptonight--> raw intensity : 512 - 640 (you have to test few values) , work size : 4 ? (I have 8 here , but u have 4 gb model) , gpu threads : 2 I hope it helps..
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
January 04, 2018, 01:44:34 AM |
|
Performance for R9 280-280 stay pretty low: Claymore 11.2 give 4500...
|
|
|
|
UnclWish
|
|
January 04, 2018, 02:24:43 AM |
|
Performance for R9 280-280 stay pretty low: Claymore 11.2 give 4500... You must change to right raw intensity for this cards. Then they will give speed equal or even more than Claymore.
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
January 04, 2018, 02:38:09 AM |
|
Performance for R9 280-280 stay pretty low: Claymore 11.2 give 4500... You must change to right raw intensity for this cards. Then they will give speed equal or even more than Claymore. Any idea what is good raw intensity for: Radeon R9 280 and 280X? And for R9 290? Thanks
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 04, 2018, 02:44:18 AM |
|
I think I need to automate optimizations as I definitely don't have money to buy all the cards out there. lol I will get to it once I am done with the next version.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
January 04, 2018, 02:52:11 AM |
|
Performance for R9 280-280 stay pretty low: Claymore 11.2 give 4500... You must change to right raw intensity for this cards. Then they will give speed equal or even more than Claymore. Any idea what is good raw intensity for: Radeon R9 280 and 280X? And for R9 290? Thanks Try 512,640,768,832,896 for 280. For 280X - 640,768,832,896,960. For 290 - 768,832,896,960,1008. Threads 2, worksize 8, as default. Every changing of rawintensity restart GGS to changes completely affects. After starting mining I recommend press Stop and Start again without settings changes. Results may be different on some cards. And the last thing - try temporary rename folder "BinaryKernels" from GGS folder. This slowing down launching of mining, but on some cards it can give more speed. And don't forget - for this amount of cards you must have pagefile size at least 75% of summary VRAM of all your cards.
|
|
|
|
Mrsmoker
Newbie
Offline
Activity: 89
Merit: 0
|
|
January 04, 2018, 09:43:51 AM |
|
reported great hash at neoscrypt. good work sir! rx 580 at 810h rx 570 at 650h
anyway sir. i found that this version makes 100percent fan rate. is this normal? and other gpu display core clock same as main gpu.
ex: my rx 580 (main) at core 1300,my rx 570 at core 1105 but my rx 570 displayed core 1300 at GGS
|
|
|
|
UnclWish
|
|
January 04, 2018, 10:11:20 AM |
|
reported great hash at neoscrypt. good work sir! rx 580 at 810h rx 570 at 650h
anyway sir. i found that this version makes 100percent fan rate. is this normal? and other gpu display core clock same as main gpu.
ex: my rx 580 (main) at core 1300,my rx 570 at core 1105 but my rx 570 displayed core 1300 at GGS
Use latest 17.12.2 driver. On 17.11.x or early drivers GGS show sensors from 1st GPU on all GPUs.
|
|
|
|
UnclWish
|
|
January 04, 2018, 10:12:28 AM |
|
Should the overclocking/underclocking be available in version 1.1.13 alpha? At my rig I cannot enable it. Only "Enable physmem" can be activated.
Overclocking/underclocking isn't available in 1.1.13 or any other versions. It will be in future versions.
|
|
|
|
proft
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 04, 2018, 11:22:56 AM |
|
Hi all! Guys help please. When you run gatelessgate-0.1.3-pre6b-win64. Writes that the connection to the server with an error, etc. Here is the content of gatelessgate-Monero-platform0 @echo off set GPU_FORCE_64BIT_PTR 1 set GPU_MAX_HEAP_SIZE 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 @echo on gatelessgate.exe --gpu-platform 0 --default-config gatelessgate-Monero.conf pause
And this is the content of gatelessgate-Monero { "algorithm": "cryptonight", "rawintensity": "896", "worksize": "8", "gpu-threads": "2",
"pools": [
{ "name": "mine.sumo.fairpool.xyz", "user": "Sumoo5H59i819DcLT3DjZVToKneE2UE5xFSGCZkzwmdkdg1W8KPF4s8CmAiNzhmEKW9VLupxAvk56JZ Yp64wTKEgKufmGzsAeq9.f0fed8a8818360e4746044ee533f69ab223a37bc39baf01cc45109d891 74a9a4 + _R570",
"pass": "x",
"quota": "stratum + tcp: //mine.sumo.fairpool.xyz: 5555" }
]
} Can anyone tell me something? Thank you!
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
January 04, 2018, 11:32:17 AM |
|
Hi all! Guys help please. When you run gatelessgate-0.1.3-pre6b-win64. Writes that the connection to the server with an error, etc. Here is the content of gatelessgate-Monero-platform0 @echo off set GPU_FORCE_64BIT_PTR 1 set GPU_MAX_HEAP_SIZE 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 @echo on gatelessgate.exe --gpu-platform 0 --default-config gatelessgate-Monero.conf pause
And this is the content of gatelessgate-Monero { "algorithm": "cryptonight", "rawintensity": "896", "worksize": "8", "gpu-threads": "2",
"pools": [
{ "name": "mine.sumo.fairpool.xyz", "user": "Sumoo5H59i819DcLT3DjZVToKneE2UE5xFSGCZkzwmdkdg1W8KPF4s8CmAiNzhmEKW9VLupxAvk56JZ Yp64wTKEgKufmGzsAeq9.f0fed8a8818360e4746044ee533f69ab223a37bc39baf01cc45109d891 74a9a4 + _R570",
"pass": "x",
"quota": "stratum + tcp: //mine.sumo.fairpool.xyz: 5555" }
]
} Can anyone tell me something? Thank you!
"rawintensity": "896", is too high for rx 570..try 512 first-640.. I have 8 gb rx 580 and over 700 intensity , I had problems .. and if your card is 4 gb , I think (but not sure) work size should be 4 , not 8. and, your sumo user name also seem to be not correct with space between + R570 ? same is true with space between port number and pool name ? "mine.sumo.fairpool.xyz: 5555"
|
|
|
|
proft
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 04, 2018, 11:38:02 AM |
|
Hi all! Guys help please. When you run gatelessgate-0.1.3-pre6b-win64. Writes that the connection to the server with an error, etc. Here is the content of gatelessgate-Monero-platform0 @echo off set GPU_FORCE_64BIT_PTR 1 set GPU_MAX_HEAP_SIZE 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 @echo on gatelessgate.exe --gpu-platform 0 --default-config gatelessgate-Monero.conf pause
And this is the content of gatelessgate-Monero { "algorithm": "cryptonight", "rawintensity": "896", "worksize": "8", "gpu-threads": "2",
"pools": [
{ "name": "mine.sumo.fairpool.xyz", "user": "Sumoo5H59i819DcLT3DjZVToKneE2UE5xFSGCZkzwmdkdg1W8KPF4s8CmAiNzhmEKW9VLupxAvk56JZ Yp64wTKEgKufmGzsAeq9.f0fed8a8818360e4746044ee533f69ab223a37bc39baf01cc45109d891 74a9a4 + _R570",
"pass": "x",
"quota": "stratum + tcp: //mine.sumo.fairpool.xyz: 5555" }
]
} Can anyone tell me something? Thank you!
"rawintensity": "896", is too high for rx 570..try 512 first-640.. I have 8 gb rx 580 and over 700 intensity , I had problems .. and if your card is 4 gb , I think (but not sure) work size should be 4 , not 8. and, your sumo user name also seem to be not correct with space between + R570 ? same is true with space between port number and pool name ? "mine.sumo.fairpool.xyz: 5555" Thanks. Now try!
|
|
|
|
proft
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 04, 2018, 12:03:09 PM |
|
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
January 04, 2018, 12:32:42 PM |
|
your problem is format of config file not card settings , be careful spaces between characters , pool address is not recognised.. I am not using command prompt version but Try like that : gatelessgate.exe -k cryptonight -o stratum+tcp://mine.sumo.fairpool.xyz:5555 -u Sumoo5H59i819DcLT3DjZVToKneE2UE5xFSGCZkzwmdkdg1W8KPF4s8CmAiNzhmEKW9VLupxAvk56JZ Yp64wTKEgKufmGzsAeq9.f0fed8a8818360e4746044ee533f69ab223a37bc39baf01cc45109d891 74a9a4.0+R570 -p x --rawintensity 512 -w 4 -g 2 you have to put this to start.bat file without any other thing.. And why you are running it from command prompt ?..there are good windows version ?
|
|
|
|
icedevil
Member
Offline
Activity: 242
Merit: 10
|
|
January 04, 2018, 01:30:16 PM |
|
hello i see you have rx580 and you can get very high hash in cryptonight i have rx570 but i get only 650 hash how do you get that? tyvm sorry for my english valerio
Hi sorry, for late answer.. i am busy nowadays... All my cards are 8 GB ..And bioses are custom modded (I am modding them), but you can use , these bioses ,( they are also very good if you dont want edit manually ): https://anorak.tech/c/downloads Just register an account to download rom files.. (according to your card manufacturer (saphire,powercolor,msi etc) and memory module brand (samsung/elpida/micron etc) download the correct bios for 4 GB !! and after bios mod : with Gateless gate device-->cyptonight--> raw intensity : 512 - 640 (you have to test few values) , work size : 4 ? (I have 8 here , but u have 4 gb model) , gpu threads : 2 I hope it helps.. https://anorak.tech/t/sapphire-rx-570-pulse/5337memshift 1500 or 1750?
|
|
|
|
coke15
Member
Offline
Activity: 176
Merit: 10
|
|
January 04, 2018, 05:54:36 PM Last edit: January 04, 2018, 07:43:29 PM by coke15 |
|
hi i try with my 570 x5 rig with nicehash conf. hashrate is good 4250 h/s like cast xmr ,without hangs(...) BUT no shares in sofware and no shares on nicehash. what i mined? ok:not compatible nicehash :/ "nicehash mode is off" dans le log no way to activate nicehash? thanks edit:found,it was under my eyes...pool propertie,nicehash first.... thanks for your works
|
|
|
|
goodb
Newbie
Offline
Activity: 126
Merit: 0
|
|
January 04, 2018, 09:20:15 PM |
|
try 1750 first, 1750 is safer , 1500 is more tight timings you are copying to higher frequency.. If 1750 brings some good improvement then you dont need 1500. And last time I forget to mention : install amd 17.12.2 drivers , and from radeon--->gaming--global settings--change gpu workload to: compute ...and be sure it stays like that, even after restart.. This is very important..
|
|
|
|
|