Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[zloy_hulk]

https://www.img.in.th/image/FW9v5i
Helpme, After devfee cann't reconnect to the pool

Yes, I had the same problem (version 1.2.9).

Now I'm trying with cmd version, will see.

Still my problem with hashrate is here.

[zawawa]

Gateless Gate Sharp 1.2.10 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.10-alpha

* Implemented a fix for broken performance counters.
* Adjusted the DEVFEE mode.
* Added an experimental command-line version.

There you go! The new command-line version works like this:

Code:

GatelessGateSharpCL.exe --custom-pool0-enabled --custom-pool0-host=s1.theblocksfactory.com --custom-pool0-login=zawawa.gatelessgate --custom-pool0-password=x --custom-pool0-algorithm=NeoScrypt

I will give you guys details later. Gotta go to bed now. Ciao!

[UnclWish]

Thanks for update! Good sleeping!

[treanski]

not bad for vega without blockchain driver

[uzzy]

any set to Neoscrytp with rx 470?

[zloy_hulk]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

[zawawa]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

[treanski]

1.2.10

cpu still high but miner much better responsive
cli version 100% cpu usage (miner around 55% and svchost.exe windows process 45%)

[chonlawan]

Report sir.
Great job!!! Close to Claymore
eth
https://imgur.com/fsW9xG9
--------------------
https://imgur.com/fOupNCl
-------------------
-------------------
xmr
https://imgur.com/yMvJDnY

--------------------------
https://imgur.com/KzX9YoC


VGA
Sapphire rx 570 bios mod(manual)
speed lock by OverdriveNT
GPU 1112/850     RAM  1940/846 chip elpida
Windows 10
Driver Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23

[heavyarms1912]

testing out 1.2.10.  Cryptonight algo on 8 x RX570s

xmr-stak v2.1 7650 H/s
GGS v 1.2.10  7633 H/s

is there a remote monitoring option?

[ayiphelmy]

Zawawa... your miner is good @ rx series card in neoscrypt but... u need more improvement in 1070ti and r9 card in neoscrypt algo
1070ti only got 430 khs and that's to low compared other is 1300-1400 khs in 1070ti maybe u can make some improve

Thanks...

[coke15]

hi

try 1.2.10:still loose 100-150h/s /per 570.

roll back in 1.2.2 :/

[sir_blacks]

@ayiphelmy  about that Zawawa was already say few wek agow this:

Zawawa... your miner is good @ rx series card in neoscrypt but... u need more improvement in 1070ti and r9 card in neoscrypt algo
1070ti only got 430 khs and that's to low compared other is 1300-1400 khs in 1070ti maybe u can make some improve
Thanks...

Second, my current focus is not on NVIDIA but on AMD.
I have most of current NVIDIA cards as I worked for NiceHash before and I will eventually get to them, but I would like to achieve a top-notch performance with GGS and AMD cards first.

soo GGS is mainly for AMD at list for this point my be in future when he will succeed to make stable release & agro wife it will alow him Nvidia will have improvement to

cheerr

[AlexNorth]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

same problem. cryptonight, pool.etn.spacepools.org for example.

[ayiphelmy]

@ayiphelmy  about that Zawawa was already say few wek agow this:

Zawawa... your miner is good @ rx series card in neoscrypt but... u need more improvement in 1070ti and r9 card in neoscrypt algo
1070ti only got 430 khs and that's to low compared other is 1300-1400 khs in 1070ti maybe u can make some improve
Thanks...

Second, my current focus is not on NVIDIA but on AMD.
I have most of current NVIDIA cards as I worked for NiceHash before and I will eventually get to them, but I would like to achieve a top-notch performance with GGS and AMD cards first.

soo GGS is mainly for AMD at list for this point my be in future when he will succeed to make stable release & agro wife it will alow him Nvidia will have improvement to

cheerr

Ah ok then ... but maybe for R9 and fury he can make some improvement... it's AMD

[waltdanger]

Tried this out first time today, good rate on neoscrypt with my Tahiti 7870 but then it got to dev fee and gave me authentication error. now no matter what algo i try I still get the error. Gave up for a couple hours to try again now, same thing.

Code:

2018-01-27 15:42:17.2132 [1] Launching NeoScrypt miners for NiceHash...
2018-01-27 15:42:18.1270 [15] Miner thread for Device #0 started.
2018-01-27 15:42:18.1310 [15] Loaded BinaryKernels\Tahiti_neoscrypt_64.bin for Device #0.
2018-01-27 15:42:18.1410 [15] Built neoscrypt program for Device #0.
2018-01-27 15:42:18.1410 [15] Build options: -O5 -legacy -IKernels -DWORKSIZE=64
2018-01-27 15:42:18.2582 [1] Stopping miners...
2018-01-27 15:42:18.3422 [15] Exception in miner thread: Stratum server failed to send a new job.   at GatelessGateSharp.OpenCLNeoScryptMiner.MinerThread()
2018-01-27 15:42:18.3593 [1] Stopped miners.
2018-01-27 15:42:20.1219 [1] Launching NeoScrypt miners for NiceHash...
2018-01-27 15:42:21.1110 [15] Miner thread for Device #0 started.
2018-01-27 15:42:21.1161 [15] Loaded BinaryKernels\Tahiti_neoscrypt_64.bin for Device #0.
2018-01-27 15:42:21.1291 [15] Built neoscrypt program for Device #0.
2018-01-27 15:42:21.1291 [15] Build options: -O5 -legacy -IKernels -DWORKSIZE=64
2018-01-27 15:42:23.2521 [1] Stopping miners...
2018-01-27 15:42:23.3322 [15] Exception in miner thread: Stratum server failed to send a new job.   at GatelessGateSharp.OpenCLNeoScryptMiner.MinerThread()
2018-01-27 15:42:23.3512 [1] Stopped miners.

[zloy_hulk]

version 1.2.10
Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.

It must be your pool, then. Which coin are you mining at which pool?

No, not pool. "bsod.pw" "sparks"

With other version (1.1.21) it's all good with that rig. but previous version restarts every 15 minutes.
Other rig mine at that pool well.

[UnclWish]

Still can't understand - why on my 4Gb Pitcairn 270X with binary kernel speed lower about 4-5%...
Without binary kernel Pitcairn GPU loads slower but gives 20-25 h/s more speed...

[Boba_Fett]

Gateless Gate Sharp 1.2.10 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.2.10-alpha

* Implemented a fix for broken performance counters.
* Adjusted the DEVFEE mode.
* Added an experimental command-line version.

There you go! The new command-line version works like this:

Code:

GatelessGateSharpCL.exe --custom-pool0-enabled --custom-pool0-host=s1.theblocksfactory.com --custom-pool0-login=zawawa.gatelessgate --custom-pool0-password=x --custom-pool0-algorithm=NeoScrypt

I will give you guys details later. Gotta go to bed now. Ciao!

Hi,

Thank you for this command line version.

Is it possible not to open a new window when the program is launched ?

[skablast]

OK, I read it all... and I just understood 10 %.


A couple of things, as its late and I'm tired:

Zawawa, isn't that you speak italian ? As I saw something form some users

is Devfee income is now  substainable from your side ? I really hope so


From a small old noob  miner perspective an open source with Dev fee is ok.
I may have an idea that clean the air , but not now as its late.

So far:
3 x mining Rig 7 RX 580 4gb Dual Mining with CM, Cryptonight with GGS, need to decide on Neoscrypt as its unstable
1 x Mining Rig 6 1050 Ti 4 GB Equihash waiting for your NVDA version
1 x mining rig  4  Rx 580 8gb + 4 x 1070 ti Dual with CM  waiting for your Equilhash for the AMD part
1 x Mining rig  6 x 1070 ti Equihash waiting for your NVDA & Equihash
1x 4 Mining rig 4 RX 570 itx waiting Gss Neoscrypt to be stable

So, please speed up on NVDA & Equihash as I don't want to have too many miners, as its a mess to tape all the strips

'nite & thanks for the passion