Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[t3syncro]

Hi,

i get the most reliable Hashrate with this:

580: 2 Threads, 128 Rawintensity, 8 Local Worksize
570: 2, 112, 8
550: 2, 44, 8

https://ibb.co/gHXuiH

[R0land]

Hi,

i get the most reliable Hashrate with this:

580: 2 Threads, 128 Rawintensity, 8 Local Worksize
570: 2, 112, 8
550: 2, 44, 8

How much is the hashrate from the 550 ?

[t3syncro]

@R0land

The 550 is about 520 h/s with 1150/2020 @0.816V..

[skablast]

The 550 is modded or you have just changed the timestraps?

[R0land]

My RX 550 hashrate is ~400 h/s with GateLessGateSharp ... and ~450 h/s with sgminer.

[t3syncro]

The 550 is modded or you have just changed the timestraps?

I unlocked it via SRB Polaris 3.3 and modified the straps, it has elpida memory on it. ..
But unlocking doesn't change the hashrate. It seems that the algo is not detecting the unlocked ROPs. Additionally i didn't get a 560 ROM running.

Try this, but don't expect a perfect strap according to some mystical rules designed while running around naked at full moon. And don't get higher than 2040 MHZ memory.
But please report, if it works for you. Would be interesting.

Code:

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C01712262B5C2B3715

xmrstak gives a steady 530 h/s.

[stonedgz]

i start mining using GGS but i got lower hashrate than claymore and power consuption is high my card is drawing 130w for 26mh\s thats too much

that on bios mode cards you think i should run on original

and about intensity how much should it be for rx570 4gb ??

gpu: rx 570 4gb powercolor red devils

1. Don't trust clay 
2. Which Algo ?
3. Which Settings (core/mem etc.) and how done (GGS, Afterbruner, Wattman etc.) ?=?

A modded Bios is "not bad" and GGS works with it - when you take care that the setup is correct done .... GGS normally has the right intensity for your card. You can see all card related stuff in the devices tab. There you see also the diff. settings for the diff algos ....

1. i do trust clay that guy is genius
2. ethash
3.1200\1950 done by afterburner

i have another problem when mining cryptonight 1 of my cards drop down with the hashrate almost half of the other even tho both same setting (GPU1:740h\s  GPU2:450h\s)

[rambetiko]

neoscrypt vega 64 hash?

[UnclWish]

Hi,

i get the most reliable Hashrate with this:

580: 2 Threads, 128 Rawintensity, 8 Local Worksize
570: 2, 112, 8
550: 2, 44, 8

Did you tried RI 58-60 for 550?

[t3syncro]

Did not work, it only has 2GB ram....

[UnclWish]

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

[t3syncro]

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

[UnclWish]

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

If card used to output image to monitor than Windows use vram.
Try low RI from 58 step by 1 and look into speed.

[t3syncro]

Did not work, it only has 2GB ram....

For RI 58-60 it's need 1,9Gb VRAM

Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something.

If card used to output image to monitor than Windows use vram.
Try low RI from 58 step by 1 and look into speed.

Thanks, i know that. I use the internal Intel VGA...But i'll give it a try.

[Darek90]

When will you update miner for Electroneum(cryptonight) so we can mine it again?

[UnclWish]

When will you update miner for Electroneum(cryptonight) so we can mine it again?

Cryptonight algo is work in GGS. To mine electroneum you just must enter your custom pool and mine.

[Darek90]

When will you update miner for Electroneum(cryptonight) so we can mine it again?

Cryptonight algo is work in GGS. To mine electroneum you just must enter your custom pool and mine.

After last night crash? i dont think so

Electroneum
5 hrs ·
Web and App wallets back online.
If you run an ETN node it's ESSENTIAL you update it. Please read posts below. If you don't know what a node is - don't worry, this message is not for you!

[UnclWish]

zawawa, any news? What with 1.3.0 version with memory timing mod?

[murgorx]

Guys, anyone of you mining with Sapphire NITRO R9 380X 4GB GDDR5, 11250-99-90G?
I'm simply asking, because I've found a local dealer, from whom I can buy the cards for 200$ each and simply need to know what kind of h/s does these cards produce to know if there's any point in making a rig out of them Do not have a lot of money left and don't wanna invest in a dead card.

BTW regarding a RX580 Sapphire nitros SE - I'm getting 880h/s on each card, is that okay for the card? Running on 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock, 65w from the wall. If there's any room to increase the h/s, even if it's drawing more electricity, please share, it's not that concerning.

[treanski]

Guys, anyone of you mining with Sapphire NITRO R9 380X 4GB GDDR5, 11250-99-90G?
I'm simply asking, because I've found a local dealer, from whom I can buy the cards for 200$ each and simply need to know what kind of h/s does these cards produce to know if there's any point in making a rig out of them Do not have a lot of money left and don't wanna invest in a dead card.

BTW regarding a RX580 Sapphire nitros SE - I'm getting 880h/s on each card, is that okay for the card? Running on 2 threads, RI 128 and LWS- 8, 1200 clock 2198mem clock, 65w from the wall. If there's any room to increase the h/s, even if it's drawing more electricity, please share, it's not that concerning.

its even possible to reduce electricity draw and increase hashrate on this gpu, you need bios mod