▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰][BTC LTC DGB RVN FLUX DASH @ the miners multipool ]⫸▇▆▅▃▂

[aarons6]

i got some of those moonlander usb scrypt miners.. if i want to mine on here and get paid in LTC is there any delays or anything?
i just put C=LTC as the password and my ltc address instead of bitcoin address?

[crackfoo]

i got some of those moonlander usb scrypt miners.. if i want to mine on here and get paid in LTC is there any delays or anything?
i just put C=LTC as the password and my ltc address instead of bitcoin address?

shouldn't be any delays. We've been finding LTC blocks fairly regularly but make sure you use c=LTC not C=LTC

[guytechie]

I see the "pending" blue line in the graph shot back up.  So I guess that means Poloniex is now operational?

Yobit you mean. Yeah I just enabled it again not too long ago.

Cheers

Oops, yeah, sorry.

BTW, currently mining on Bitcore algo, and my miner is mining at 47 MH/s.  The pool graph started out at around 47 MH/s slowly went down to around 20 MH/s gradually in the time span of about 10 hours.

Another rig of mine is doing 76 MH/s, and the pool graph for that also started around 76 MH/s but slowly went down to 1.5 MH/s in the same time span.  It's mining at a different address so I could keep track.

Both miners still say they're mining at their top speed (no slow downs), but the zpool graph shows this gradual slowdown.  Any ideas on why that is?

[nivo1972]

is their a problem with HSR? why does it list something called BBLOCKHOLE?

[JaredKaragen]

@crackfoo:

SHA256 has some pretty crazy profitability numbers today... did you just change the normalization ratio on it?  I don't see it denoted as per ph or anything....


Maybe a crazy exchange API again?

[aarons6]

i got some of those moonlander usb scrypt miners.. if i want to mine on here and get paid in LTC is there any delays or anything?
i just put C=LTC as the password and my ltc address instead of bitcoin address?

shouldn't be any delays. We've been finding LTC blocks fairly regularly but make sure you use c=LTC not C=LTC

i guess they dont work on this pool.
i put #skipcbcheck and #xnsub on the url but they only send a few shares then shut down..

also for some reason, my compac miners dont like this pool either.. after 24 hours of mining my stats only shows in khs not ghs and the shares show 0%

[crackfoo]

@crackfoo:

SHA256 has some pretty crazy profitability numbers today... did you just change the normalization ratio on it?  I don't see it denoted as per ph or anything....


Maybe a crazy exchange API again?

I did actually change it to PH a long time ago. I just noticed the other day I didn’t actually change the units in the stratum server. So now they are actually mBTC/PH/Day

[JaredKaragen]

i guess they dont work on this pool.
i put #skipcbcheck and #xnsub on the url but they only send a few shares then shut down..

also for some reason, my compac miners dont like this pool either.. after 24 hours of mining my stats only shows in khs not ghs and the shares show 0%

Is it an ASIC?
What miner app are you using?
What miner(s)/hardware are you controlling with this software that you are reporting the issue with?


As a small test:
On your wallet page, connect without #xnsub.  
Look at the "Miners: <your payout address>"table,  and you will see your miner listed at the bottom of that table.   One of the columns is "ES**"  Does extranonce report as on?  You will see a green check mark if so.  


Almost all miner apps have ES on by default nowadays, some have it as a parameter in the build/makefile (--extranonce or something along those lines), and some accept it as a parameter of the stratum URL.  I have yet to see it configured on a ccminer or sgminer variant to take the extranonce flag from the url and not a separate command line input....  


So please, answer the above questions;  they will help me resolve your problem for you... as extranonce helps with overall workunit efficiency.

I did actually change it to PH a long time ago. I just noticed the other day I didn’t actually change the units in the stratum server. So now they are actually mBTC/PH/Day

OK awesome.  Just looking out for those crazy errors, and this one fit the bill


I see the mainpage update now that i've double checked it....

It was just odd to see profitability in the hundreds of mBTC again....   Felt like a flashback to year or two ago for a hot minute

[BlitheJr]

Crackfoo, i'm trying config the address for your pool with the value #xnsub, but's not working.

My config it's like this: -o stratum+tcp://xevan.mine.zpool.ca:3739#xnsub
 
But i'm always get this error :
 
failed to resolve <wrong URL?> xevan.mine.zpool.ca:3739#x:24]

 Why this is happen? Is there a way to fix this problem?

it's possible the miner you're using isn't coded to recognize the xnsub.

This is what it looks like;  notice how its not storing whats after the #x properly......

But this is a flag for ASICS; Typically sg/ccminer will have extranonce on by default...   

what are you using this on?  I see a -o, so obviously you are putting this into one of the sg/ccminer or other variants.....

Yes i'm using the value #xnsub in a sgminer xevan version. 

The question is, even without this value the pool doesn't allow to mining. Why?

Is there a minimun hash rate for GPUS start to mine?

[JaredKaragen]

Crackfoo, i'm trying config the address for your pool with the value #xnsub, but's not working.

My config it's like this: -o stratum+tcp://xevan.mine.zpool.ca:3739#xnsub
 
But i'm always get this error :
 
failed to resolve <wrong URL?> xevan.mine.zpool.ca:3739#x:24]

 Why this is happen? Is there a way to fix this problem?

it's possible the miner you're using isn't coded to recognize the xnsub.

This is what it looks like;  notice how its not storing whats after the #x properly......

But this is a flag for ASICS; Typically sg/ccminer will have extranonce on by default...   

what are you using this on?  I see a -o, so obviously you are putting this into one of the sg/ccminer or other variants.....

Yes i'm using the value #xnsub in a sgminer xevan version. 

The question is, even without this value the pool doesn't allow to mining. Why?

Is there a minimun hash rate for GPUS start to mine?

no minimum, but difficulty may need to be set manually if auto doesn't work.

you will see hashrate poolside once valid shares are sent poolside.


do not use xnsub on this miner.

run it normal; and look at your page;  it will almost certainly be enabled by default.....  As mentioned before;  the #xnsub is a flag introduced into the miner app incorporated in standalone asics.

[Skorsez]

crackfoo, hello. Discordapp does not work? I can not find the support channel... "Invitation expired or contains an error" what is that? Or you block me? I just only have a question.

Thank you for attention.

[kalimancr]

Hello admin:

  Can I view the historical data of the following columns:

 https://screenshot.net/xe1lrcq

  Thanks

[crackfoo]

Hello admin:

  Can I view the historical data of the following columns:

 

  Thanks

bit of this maybe:

http://zpool.ca/stats

[hyipke]

Dear admin:
how can I start with my Innosilicon scrypt miner A4.
it seems that it don't work when I use the same setting like L3+

[yetme]

Hi guys,

I have a few D3s and I'd like to mine Onix coin

What the password setting for D3 should be?

Password: c=ONX,d=92

is this correct?

or should I just set

Password: c=ONX

[STSMiner]

Crackfoo,

BitSend (xevan) needs looking at.

[guytechie]

Website seems to be down for a while now.  Thought it was typical payment outage, but it's been about half hour now.

Edit: It's back.

[crackfoo]

Website seems to be down for a while now.  Thought it was typical payment outage, but it's been about half hour now.

Edit: It's back.

yeah was just doing some updates for segwit. back to normal now, graphs will have the blip in them because of it.

[guytechie]

Website seems to be down for a while now.  Thought it was typical payment outage, but it's been about half hour now.

Edit: It's back.

yeah was just doing some updates for segwit. back to normal now, graphs will have the blip in them because of it.

Thanks for the update. BTW, you might want to restart the bitcore stratum.  It's reporting less hashrate on the site vs what the miners are actually doing again.

[crackfoo]

Website seems to be down for a while now.  Thought it was typical payment outage, but it's been about half hour now.

Edit: It's back.

yeah was just doing some updates for segwit. back to normal now, graphs will have the blip in them because of it.

Thanks for the update. BTW, you might want to restart the bitcore stratum.  It's reporting less hashrate on the site vs what the miners are actually doing again.

thanks, done.