▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[aarons6]

Can anybody tell me what pools my Intel I5 7500 can mine in on zpool. Losing my mind here.

CPU mining is a losing proposition, use a GTX 1050 or higher Nvidia card GPU mining with NemosMiner or AwesomeMiner, they can generate $2.50-$5.00/day per card

ZPOOL 'Total Earned' Shrinks TWICE in 2 days - Support doesn't respond to request as to why!!!
PROOF: https://imgur.com/a/kIxUc

total earned is your total paid plus your unpaid balance..
 **** Total Unpaid is a combination of your confirmed Balance and your fluctuating total pending. This value will rarely be constant.


i think total earned should be removed or changed to BALANCE plus TOTAL PAID.. its causing people to misjudge the number changing.. :/


the reason you see your coins "disappear" is because when you mine coins you arent mining bitcoin.. this coin has a value attached to it that is at the time value. this value is displayed in bitcoin...
these coins then get sent to an exchange and they get exchanged for a REAL value. it could go up, or down.. mostly goes down tho..

then you get credited for the ACTUAL amount.. this really is the ONLY amount that matters.. it is the BALANCE.. this number should never go down. only up. so keep an eye on your BALANCE and you will notice it going up.

[Nataly2014]

for WitWolfy:you have not a bad cpu and you can get a few coins: monero, Ric, Aeon, but not to zpool! To zpool you can see coin from yescrypt algo i think! Ofc gpu will give more profit, but it also requires more electricity, generates a lot of noise and heat! Mining on cpu is as comfortable as possible, invisible and does not interfere with the use of a computer at home! gpu requires a separate cooled room free energy for to create farms!

[jcorbijn]

anybody else not earning their normal amount of BTC the last 24h? I mined the last hours and would normally get about 0.0005 BTC with 2 1060 6GB I now only made 0.00002 in the last 24 hours.

I mined neoscrypt and nist5 the last 24 hours.

Another thing I noticed is that the hashrate on Zpool is way lower (minimum 20%) than what is shown by my miner. I checked about 10 times in an hour and non came even close to the hashrate the miner showed. Can anybody explain the cause of this delta?

[CrownRoyal79]

anybody else not earning their normal amount of BTC the last 24h? I mined the last hours and would normally get about 0.0005 BTC with 2 1060 6GB I now only made 0.00002 in the last 24 hours.

I mined neoscrypt and nist5 the last 24 hours.

Another thing I noticed is that the hashrate on Zpool is way lower (minimum 20%) than what is shown by my miner. I checked about 10 times in an hour and non came even close to the hashrate the miner showed. Can anybody explain the cause of this delta?

Read through the last few pages -- Numerous complaints about hashrates being reported extremely low. You are lucky that yours is only showing 20% lower. I mined for 2 days and my hashrates were 60% below the actual rates! I switched pools and now I'm being paid properly. Anybody who is still mining on Zpool right now has some huge balls because this pool is all screwed up. I'll give it another shot AFTER everything gets fixed and everybody's proper hashrates get reported.

[crackfoo]

anybody else not earning their normal amount of BTC the last 24h? I mined the last hours and would normally get about 0.0005 BTC with 2 1060 6GB I now only made 0.00002 in the last 24 hours.

I mined neoscrypt and nist5 the last 24 hours.

Another thing I noticed is that the hashrate on Zpool is way lower (minimum 20%) than what is shown by my miner. I checked about 10 times in an hour and non came even close to the hashrate the miner showed. Can anybody explain the cause of this delta?

Did some changes to NIST5 algo this morning and looks like hashrates are holding. Will be keeping an eye on it. There only so much I can do when there are a zillion "Awesome Miner" users drowning my inboxes.

[garandhero]

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

[guytechie]

Can anybody tell me what pools my Intel I5 7500 can mine in on zpool. Losing my mind here.

Write script to mine m7m and xevan wit cpuminer-opt.

Mine will autoswitch between the two.  Use profit correction so it knows when it’s actually more profitable to switch to Xevan because Xevan can now be mined with GPU too.  m7m is CPU-only for now.

[Sityl]

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

I'd say about the % chance as you're requesting (disclaimer, I have no actual idea)

[guytechie]

Speaking of CPU mining, has anyone asked about adding other CPU mining algos and coins here?  I hear Aeon and Monero are CPU friendly.  There may be others I don’t know about.

[crackfoo]

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

[uhro]

Any idea when the pool will become stable again?
I've moved my miners elsewhere so I can receive proper earnings for now, kept one on zpool just so I can keep an eye on stability for myself.

I'm experiencing what most are posting here, hashrates consistently reported much lower on the website and lower earnings.
I like your pool and will move most of my rigs back once it's sorted out.
Is there an eta?

[just.dont]

Did some changes to NIST5 algo this morning and looks like hashrates are holding. Will be keeping an eye on it. There only so much I can do when there are a zillion "Awesome Miner" users drowning my inboxes.

Thanks. My hashrate reported by website now at least roughly matches "raw" miner hashrate. Will be looking at it for some hours, but so far math generally checks out.

[jcorbijn]

just started the pool up again and it looks like it checks out.

Thank you crackfoo for the quick reaction!

[garandhero]

Lots of rejected shares on scrypt.  Disabled for now.

(nvidia cards)

[MaxiMan]

How to set up properly Multi Algo Switching on CCminer?
This is what it put on Batch following example of Zpool

Code:

:start
ccminer-x64 -a neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a lyra2v2 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a equihash -o stratum+tcp://equihash.mine.zpool.ca:2142 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash

sleep 5000
goto start

For my GTX980ti looks this best algos for me

[JaredKaragen]

Lots of rejected shares on scrypt.  Disabled for now.

(nvidia cards)

the scrypt port?   GPU's are like a serious fraction of a asic.......  seems like a waste.

How to set up properly Multi Algo Switching on CCminer?
This is what it put on Batch following example of Zpool

Code:

:start
ccminer-x64 -a neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a lyra2v2 -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash
ccminer-x64 -a equihash -o stratum+tcp://equihash.mine.zpool.ca:2142 -u WALLET ADRESS -p c=BTC,lbry,lyra2v2,equihash

sleep 5000
goto start

For my GTX980ti looks this best algos for me

you must make sure your ccminer supports each algo you are using it with... but the errors in your batch are as follows:
password on all should be "c=BTC,neoscrypt,lyra2v2,equihash";  LBRY is not an algo in your batch.  You also need to follow my instructions below to find out how to "normalize" the miner batch to your individual machine so that it's profitability calculations are correct... so each algo will contain a number after as such:
"c=BTC,neoscrypt=0.9,lyra2v2=65.0,equihash=0.95"
But these numbers I put are just examples.  You will know how to set it up with my instructional batch link post mentioned below.

check the batch link in my sig.   Lots of examples, and if you look for the link in that post to my "lite batch", you will find an example exactly like what you are trying to do.

My scripts simplify it though, and the most recent automatic miner has lots of notes on it for easy modification by a new user... and they make it easy to add an algo that is missing that you wish to mine.

[MaxiMan]

Yea, my bad i left lbry there...
However.. a read too about normalizations.. how do i calculate them?
I saw normalizations for 1070 but would be about the same for 980ti?

[jpouza]

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

Just reporting that your pool is 100%, everything looks fine, thanks for the good job.

No balance drops, no problems at website, no discrepance into hashrate reported, nice, keep up with the good job.

Cheers

[Sityl]

I have a question.  Take the following example:


Amount                Percent      mBTC        Time   
0.049827 MONA       0.199%         0.03692776      13m ago

Does this mean I've earned 0.03692776 mBTC, or 0.199% of 0.03692776 mBTC?

Cheers!)

[crackfoo]

I know this is likely a dumb question, but what are the odds of lowering the fee's as like a "holiday" special from the 2% to 1.5% or 1.25% or dare I say it, 1%

fee's updated on some algo.

Just reporting that your pool is 100%, everything looks fine, thanks for the good job.

No balance drops, no problems at website, no discrepance into hashrate reported, nice, keep up with the good job.

Cheers

good to hear. Still work to be done but glad to see it's getting back to normal with the extra 15k miners