▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[guytechie]

Questions:

1.  What is a good difficulty setting (d=xxx) for equihash at 300 sols/s?  I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.

2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo?  Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt.  I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature).  When they removed m7m, my miners actually moved to another algo!

3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard.  Is this due to Yobit?  Will we be credited properly when it's back even though they mature at 0?

[BlitheJr]

I' m having a big problem, and would like help.

I'm trying to mine xevan with a rx570 in zpool, but the pool provide only a few works and show a very low hash rate like 5Kh/s.

This is very strange, because i made tests with cpuminer and in this case the pool provide work at every second an the site show hash rates much higher than with my GPU.

Why this is happening?  Someone in the pool could help to fix this?   

my guess is the miner app you are using...

These are all nvidia cards:
http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN

I see nothing abnormal... aside from the common frontend dropouts.

The problem is my card it's an AMD, and the only miner available (that i know) to mine xevan/bitsend it's this version of Sgminer:  https://github.com/LIMXTEC/Xevan-GPU-Miner/releases

There's another miner or version that i can use to mine xevan with AMD GPUs?

[crackfoo]

Questions:

1.  What is a good difficulty setting (d=xxx) for equihash at 300 sols/s?  I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.

2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo?  Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt.  I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature).  When they removed m7m, my miners actually moved to another algo!

3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard.  Is this due to Yobit?  Will we be credited properly when it's back even though they mature at 0?

hrmm I haven't tried equihash yet with my GPU's. have you tried anything lower than the start diff?

I'm not really sure what they'd have done to do that....

ccex seems to have been down for almost 24h now... I'll remove it from being mined any more until ccex is back.

[poer]

my miner XVG http://www.zpool.ca/?address=D9umeoC8gP25JdEhGitzSPzYuvspXfadxr
why using UNOcoin

please repleace miner

[crackfoo]

my miner XVG http://www.zpool.ca/?address=D9umeoC8gP25JdEhGitzSPzYuvspXfadxr
why using UNOcoin

please repleace miner

fixed

[Bulletdodger]

so... is BCH supported as a payout option on zpool or not?

thanks

[wolverine5pl]

so... is BCH supported as a payout option on zpool or not?

thanks

i think it is but... no mininig so no blocks to payout in bch

[Bulletdodger]

so... is BCH supported as a payout option on zpool or not?

thanks

i think it is but... no mininig so no blocks to payout in bch

:/
so it's like it isn't...
thanks

[WitWolfy]

for WitWolfy:you have not a bad cpu and you can get a few coins: monero, Ric, Aeon, but not to zpool! To zpool you can see coin from yescrypt algo i think! Ofc gpu will give more profit, but it also requires more electricity, generates a lot of noise and heat! Mining on cpu is as comfortable as possible, invisible and does not interfere with the use of a computer at home! gpu requires a separate cooled room free energy for to create farms!

Thanks for the advice, much appreciated. Yescrypt only has: Myriad, GlobalBoost and Unitus coins. I'll mine for a while to see what the payments are. Here goes nothing.

[Idjces]

fixed

Same here please, i flagged c=xvg but it has detected UNO

http://www.zpool.ca/?address=D8Bp4o8FY2Xh8CrbdxyTDzQKkXUU1jaNoL

[Fromage]

Sniffdog now has JayDDee cpuminer and default is sse2 with sha support

Happy Mining!

[jpouza]

OP, due to Bitcoin network = trash and high fee friendly, 0,0025BTC payouts are getting stucked more than days to be paid because the low fee adopted, please change the minimum payout to 0,005 or 0,01BTC and increase the fee for tx confirm fast, please.

I'm about to receive a new payment and the other one didn't even get confirmed: e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4

Tks

[OldDriver]

OP, due to Bitcoin network = trash and high fee friendly, 0,0025BTC payouts are getting stucked more than days to be paid because the low fee adopted, please change the minimum payout to 0,005 or 0,01BTC and increase the fee for tx confirm fast, please.

I'm about to receive a new payment and the other one didn't even get confirmed: e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4

Tks

I am new here from the NiceHash, same block didn't get confirmed. e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4
Is this an usual thing for Zpool, since payment from NiceHash quite fast usually within few hours.
I guess I will just wait.

[SmoldurHash]

I just got sent another payment but mine from yesterday did not confirm yet, nor has today's either, so now I assume I will have two payouts stuck in this unconfirmed state for an unknown amount of time?

Transaction View information about a bitcoin transaction

935e7852412a2a14065b3da3f365ba5f4a83c16be9a6f3f4edc2ac9c827a5c43

Transaction View information about a bitcoin transaction

e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4

[guytechie]

Questions:

1.  What is a good difficulty setting (d=xxx) for equihash at 300 sols/s?  I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.

2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo?  Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt.  I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature).  When they removed m7m, my miners actually moved to another algo!

3. BitcoinZ is reporting as worth 0 BTC for a while on the dashboard.  Is this due to Yobit?  Will we be credited properly when it's back even though they mature at 0?

hrmm I haven't tried equihash yet with my GPU's. have you tried anything lower than the start diff?

I'm not really sure what they'd have done to do that....

ccex seems to have been down for almost 24h now... I'll remove it from being mined any more until ccex is back.

I tried different d=xxx settings, but nothing worked.  I don't know what the range is for equihash.  I tried d=2, d=10, d=100. d=2000.

The miner (Claymore ZCash for AMD) says:
ZEC: Authorized
Pool sets new share target: 0x0003fffc (diff: 16384H)

So I guess diff starts at 16384?  So I've also trie d=15000, d=10000, d=5000

So if BitcoinZ is not being traded, does it mean what we've mined so far is in the hot wallet?  Hopefully it can be traded eventually.  Would suck to have mined them for nothing.

[JSevyn]

my miner XVG http://www.zpool.ca/?address=D9umeoC8gP25JdEhGitzSPzYuvspXfadxr
why using UNOcoin

please repleace miner

fixed

My wallet is http://www.zpool.ca/?address=DMndsqy5tKeSfu5Pe6KBDnQnJT4bwc9ijM

Im having the same issue saying that it's mining UNO??

I notice in the summary it shows X17 and in the details section is shows c=XVG under EXTRA and X17 under ALGO. Am I doing something wrong?

[GbrilliantQ]

OP, due to Bitcoin network = trash and high fee friendly, 0,0025BTC payouts are getting stucked more than days to be paid because the low fee adopted, please change the minimum payout to 0,005 or 0,01BTC and increase the fee for tx confirm fast, please.

I'm about to receive a new payment and the other one didn't even get confirmed: e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4

Tks

Yup, I'm seeing it. I have two unconfirmed transactions. One of which is 36 hours old.

[jb7032]

I have been getting daily payouts without issue from ZPOOL. I'm sure there was some spam transactions from the Bitcoin Cash folks trying to prove their point yesterday and into today. There is double the amount of unconfirmed transactions as normal and strangely enough this only happens when BCC has a planned insider pump...The BTC network while still broken IMO will catch up and our payments will come through as they seem to have large fee's built in.

[spiffrae]

BTC payout stuck unconfirmed for 26 hours now

[JaredKaragen]

OP, due to Bitcoin network = trash and high fee friendly, 0,0025BTC payouts are getting stucked more than days to be paid because the low fee adopted, please change the minimum payout to 0,005 or 0,01BTC and increase the fee for tx confirm fast, please.

I'm about to receive a new payment and the other one didn't even get confirmed: e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4

Tks

I am new here from the NiceHash, same block didn't get confirmed. e85b944e5614ceed445e650b3b38c7b1a7b62018220872ecc3a3a8c46c0270b4
Is this an usual thing for Zpool, since payment from NiceHash quite fast usually within few hours.
I guess I will just wait.

post mine to address so i can verify its a tx number coming from the pool, as it will be publicly on your wallet page.

doing a google search yielded no results on the site.

My recent tx have all come through fine.

http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN


without this information I ask for, nobody can help you.