▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[crackfoo]

You are NOT "mining XVG".

You are mining Lyra2v2 and collecting a pay-out in XVG.  Any ninja/mona/vert coins mined by the pool are split among the pool members, and your share is paid to you as XVG.

Look at it like this:  You (and a thousand other people) are digging in a hillside that potentially contains gold, silver, and aluminum.  Whatever you happen to find gets sold @market and split among all the people.  You've opted to get paid in gold.  You don't get any silver or aluminum.  You could, if you like, opt to be paid in mushrooms... but that presumes that someone on another hillside in Zpoolville is mining mushrooms.

Thanks thats helpful.. So could I mine any of the available algos on the pool such as "blakecoin" and get paid out in XVG?

yup

[crackfoo]

What is the problem with the difficulty setting at this pool?!
Doesn't work anymore. Can't set lower difficulty (d=xxx) at some algos!
Smaller miners are no longer welcome?!
 

d= should work but right now is limited to 1/2 the started diff.

So if you connect your miners and the diff says 1000 and lowest you can set d= below the starting diff is 500

Its to protect the stratum from being flooded intentionally with low diff

Thanks!  What's the starting diff for equihash?  My miner doesn't really say (or at least maybe I don't understand it).

Code:

Pool sets new share target: 0x0003fffc (diff: 16384H)

What does that mean?

0003fffc (if hex) is 262140 in dec.

Dividing 262140 in half didn't work, nor did giving it a bit more to make sure it's just above half.

Treating 16384H as a dec didn't help either.  Treating it like HEX (and converting it to dec) didn't work.

you can check your wallet stats for the diff when it starts up and it would print it in more legible value probably But equihash is 128 starting so can supply d=64 for it and it should work.

[malthrax]

You are NOT "mining XVG".

You are mining Lyra2v2 and collecting a pay-out in XVG.  Any ninja/mona/vert coins mined by the pool are split among the pool members, and your share is paid to you as XVG.

Look at it like this:  You (and a thousand other people) are digging in a hillside that potentially contains gold, silver, and aluminum.  Whatever you happen to find gets sold @market and split among all the people.  You've opted to get paid in gold.  You don't get any silver or aluminum.  You could, if you like, opt to be paid in mushrooms... but that presumes that someone on another hillside in Zpoolville is mining mushrooms.

Thanks thats helpful.. So could I mine any of the available algos on the pool such as "blakecoin" and get paid out in XVG?

Yes, as long as there's enough XVG being mined by the pool to pay you.

f.ex.: Nobody on Zpool mines Ethereum, so you can't be paid in ETH.


 Zpool will not go to an exchange and buy a particular coin to pay you if its short.  The only thing Zpool "fetches" is bitcoin.

[cpuwar]

I am trying sgminer to mine xvg with x17 algo..it's running but getting no shares as the cmd window below.. Do your pool support sgminer x17 algo for AMD gpu?

sgminer 4.2.2 - Started: [2017-12-25 02:29:29] - [0 days 00:01:50]
--------------------------------------------------------------------------------
(5s):22.27M (avg):20.29Mh/s | A:0  R:0  HW:9  WU:0.000/m
ST: 2  SS: 0  NB: 4  LW: 180  GF: 0  RF: 0
Connected to x17.mine.zpool.ca (stratum) diff 0.050 as user DAob8CB4A6tvFvT79gAFDHBx3LW4hNGvCb
Block: 710d1adc...  Diff:6.84K  Started: [02:30:34]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0:  69.0C  383RPM | 4.964M/4.741Mh/s | R:  0.0% HW:2 WU:0.000/m I:20
GPU 1:  66.0C  652RPM | 5.708M/5.343Mh/s | R:  0.0% HW:0 WU:0.000/m I:20
GPU 2:  62.0C  794RPM | 5.721M/5.343Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
GPU 3:  68.0C  156RPM | 5.336M/5.120Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
--------------------------------------------------------------------------------
[02:29:24] Started sgminer 4.2.2
[02:29:24] * using Jansson 2.6
[02:29:24] Probing for an alive pool
[02:29:28] Startup GPU initialization... Using settings from pool x17.mine.zpool.ca.
[02:29:28] Startup Pool No = 0
[02:29:28] x17.mine.zpool.ca difficulty changed to 0.050
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024[/s][/s]

[cryptominer420]

I am trying sgminer to mine xvg with x17 algo..it's running but getting no shares as the cmd window below.. Do your pool support sgminer x17 algo for AMD gpu?

sgminer 4.2.2 - Started: [2017-12-25 02:29:29] - [0 days 00:01:50]
--------------------------------------------------------------------------------
(5s):22.27M (avg):20.29Mh/s | A:0  R:0  HW:9  WU:0.000/m
ST: 2  SS: 0  NB: 4  LW: 180  GF: 0  RF: 0
Connected to x17.mine.zpool.ca (stratum) diff 0.050 as user DAob8CB4A6tvFvT79gAFDHBx3LW4hNGvCb
Block: 710d1adc...  Diff:6.84K  Started: [02:30:34]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0:  69.0C  383RPM | 4.964M/4.741Mh/s | R:  0.0% HW:2 WU:0.000/m I:20
GPU 1:  66.0C  652RPM | 5.708M/5.343Mh/s | R:  0.0% HW:0 WU:0.000/m I:20
GPU 2:  62.0C  794RPM | 5.721M/5.343Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
GPU 3:  68.0C  156RPM | 5.336M/5.120Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
--------------------------------------------------------------------------------
[02:29:24] Started sgminer 4.2.2
[02:29:24] * using Jansson 2.6
[02:29:24] Probing for an alive pool
[02:29:28] Startup GPU initialization... Using settings from pool x17.mine.zpool.ca.
[02:29:28] Startup Pool No = 0
[02:29:28] x17.mine.zpool.ca difficulty changed to 0.050
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024[/s][/s]

It works, you just have to wait for your miner to find a share or wait for the difficulty to adjust to your system speeds.

Secret you will make more xvg if you were mining neoscrypt with your amd gpu's as it is more profitable than mining verge directly.

[guytechie]

you can check your wallet stats for the diff when it starts up and it would print it in more legible value probably But equihash is 128 starting so can supply d=64 for it and it should work.

Thanks.  It looks like that's the lowest it'll go.  Still a bit difficult for a 300 Sol miner, but oh well.

[cpuwar]

I am trying sgminer to mine xvg with x17 algo..it's running but getting no shares as the cmd window below.. Do your pool support sgminer x17 algo for AMD gpu?

sgminer 4.2.2 - Started: [2017-12-25 02:29:29] - [0 days 00:01:50]
--------------------------------------------------------------------------------
(5s):22.27M (avg):20.29Mh/s | A:0  R:0  HW:9  WU:0.000/m
ST: 2  SS: 0  NB: 4  LW: 180  GF: 0  RF: 0
Connected to x17.mine.zpool.ca (stratum) diff 0.050 as user DAob8CB4A6tvFvT79gAFDHBx3LW4hNGvCb
Block: 710d1adc...  Diff:6.84K  Started: [02:30:34]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0:  69.0C  383RPM | 4.964M/4.741Mh/s | R:  0.0% HW:2 WU:0.000/m I:20
GPU 1:  66.0C  652RPM | 5.708M/5.343Mh/s | R:  0.0% HW:0 WU:0.000/m I:20
GPU 2:  62.0C  794RPM | 5.721M/5.343Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
GPU 3:  68.0C  156RPM | 5.336M/5.120Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
--------------------------------------------------------------------------------
[02:29:24] Started sgminer 4.2.2
[02:29:24] * using Jansson 2.6
[02:29:24] Probing for an alive pool
[02:29:28] Startup GPU initialization... Using settings from pool x17.mine.zpool.ca.
[02:29:28] Startup Pool No = 0
[02:29:28] x17.mine.zpool.ca difficulty changed to 0.050
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024[/s][/s]

It works, you just have to wait for your miner to find a share or wait for the difficulty to adjust to your system speeds.

Secret you will make more xvg if you were mining neoscrypt with your amd gpu's as it is more profitable than mining verge directly.

@cryptominer thanks for the advice.. I did mine various neoscrypt coins.. now I want xvg.
The diff was changed from 0.05 to 0.025.. both are not high.. it seems not working.. some other thing is wrong..

[cryptominer420]

I am trying sgminer to mine xvg with x17 algo..it's running but getting no shares as the cmd window below.. Do your pool support sgminer x17 algo for AMD gpu?

sgminer 4.2.2 - Started: [2017-12-25 02:29:29] - [0 days 00:01:50]
--------------------------------------------------------------------------------
(5s):22.27M (avg):20.29Mh/s | A:0  R:0  HW:9  WU:0.000/m
ST: 2  SS: 0  NB: 4  LW: 180  GF: 0  RF: 0
Connected to x17.mine.zpool.ca (stratum) diff 0.050 as user DAob8CB4A6tvFvT79gAFDHBx3LW4hNGvCb
Block: 710d1adc...  Diff:6.84K  Started: [02:30:34]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0:  69.0C  383RPM | 4.964M/4.741Mh/s | R:  0.0% HW:2 WU:0.000/m I:20
GPU 1:  66.0C  652RPM | 5.708M/5.343Mh/s | R:  0.0% HW:0 WU:0.000/m I:20
GPU 2:  62.0C  794RPM | 5.721M/5.343Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
GPU 3:  68.0C  156RPM | 5.336M/5.120Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
--------------------------------------------------------------------------------
[02:29:24] Started sgminer 4.2.2
[02:29:24] * using Jansson 2.6
[02:29:24] Probing for an alive pool
[02:29:28] Startup GPU initialization... Using settings from pool x17.mine.zpool.ca.
[02:29:28] Startup Pool No = 0
[02:29:28] x17.mine.zpool.ca difficulty changed to 0.050
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024[/s][/s]

It works, you just have to wait for your miner to find a share or wait for the difficulty to adjust to your system speeds.

Secret you will make more xvg if you were mining neoscrypt with your amd gpu's as it is more profitable than mining verge directly.

@cryptominer thanks for the advice.. I did mine various neoscrypt coins.. now I want xvg.
The diff was changed from 0.05 to 0.025.. both are not high.. it seems not working.. some other thing is wrong..

With zpool you can mine neoscrypt and get paid in XVG just set your username to your xvg address and in the pass field use c=XVG

[cpuwar]

I am trying sgminer to mine xvg with x17 algo..it's running but getting no shares as the cmd window below.. Do your pool support sgminer x17 algo for AMD gpu?

sgminer 4.2.2 - Started: [2017-12-25 02:29:29] - [0 days 00:01:50]
--------------------------------------------------------------------------------
(5s):22.27M (avg):20.29Mh/s | A:0  R:0  HW:9  WU:0.000/m
ST: 2  SS: 0  NB: 4  LW: 180  GF: 0  RF: 0
Connected to x17.mine.zpool.ca (stratum) diff 0.050 as user DAob8CB4A6tvFvT79gAFDHBx3LW4hNGvCb
Block: 710d1adc...  Diff:6.84K  Started: [02:30:34]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0:  69.0C  383RPM | 4.964M/4.741Mh/s | R:  0.0% HW:2 WU:0.000/m I:20
GPU 1:  66.0C  652RPM | 5.708M/5.343Mh/s | R:  0.0% HW:0 WU:0.000/m I:20
GPU 2:  62.0C  794RPM | 5.721M/5.343Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
GPU 3:  68.0C  156RPM | 5.336M/5.120Mh/s | R:  0.0% HW:4 WU:0.000/m I:20
--------------------------------------------------------------------------------
[02:29:24] Started sgminer 4.2.2
[02:29:24] * using Jansson 2.6
[02:29:24] Probing for an alive pool
[02:29:28] Startup GPU initialization... Using settings from pool x17.mine.zpool.ca.
[02:29:28] Startup Pool No = 0
[02:29:28] x17.mine.zpool.ca difficulty changed to 0.050
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:28] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024
[02:29:29] Initialising kernel x17.cl with bitalign, unpatched BFI, nfactor 10, n 1024[/s][/s]

It works, you just have to wait for your miner to find a share or wait for the difficulty to adjust to your system speeds.

Secret you will make more xvg if you were mining neoscrypt with your amd gpu's as it is more profitable than mining verge directly.

@cryptominer thanks for the advice.. I did mine various neoscrypt coins.. now I want xvg.
The diff was changed from 0.05 to 0.025.. both are not high.. it seems not working.. some other thing is wrong..

With zpool you can mine neoscrypt and get paid in XVG just set your username to your xvg address and in the pass field use c=XVG

I tried like
sgminer.exe -k neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u Dxxx..(my xvg address) -p c=XVG -I 20

and I got the error :
Error in hsa_operand section, at offset 3552:
Address offset exceeds variable size
LLVM ERROR:
 Brig container validation has failed in BRIGAsmPrinter.cpp

[cryptominer420]

I tried like
sgminer.exe -k neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u Dxxx..(my xvg address) -p c=XVG -I 20

and I got the error :
Error in hsa_operand section, at offset 3552:
Address offset exceeds variable size
LLVM ERROR:
 Brig container validation has failed in BRIGAsmPrinter.cpp

What version of SGminer, what cards I have rx 470's doing 740kH/s at -I 13 using the old Gateless Gate v0.1.3-pre6

My bat launches using
sgminer.exe -k neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u Djxx..(my xvg address) -p c=XVG,4x470 -I 13

[happie]

Can I use my segwit BTC address (3B4fKR...) on zpool? Would like to be paid out to my new wallet.

[cryptominer420]

Can I use my segwit BTC address (3B4fKR...) on zpool? Would like to be paid out to my new wallet.

This was answered a page or 2 back by crackfoo.

[JaredKaragen]

Looks like XVS and AMS are offline on the xevan port. (greyed out)  Did the coinbox go offline?

[aarons6]

can you lower the min scrypt diff to 1024? right now as low as it goes is 32768 and its too high for the moonlander usb sticks.

[happie]

Can I use my segwit BTC address (3B4fKR...) on zpool? Would like to be paid out to my new wallet.

This was answered a page or 2 back by crackfoo.

And the answer was? I can't find it...

[henrynguyen20]

can i receive Verge instead of Btc ?
Thanks
Henry

[cpuwar]

I tried like
sgminer.exe -k neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u Dxxx..(my xvg address) -p c=XVG -I 20

and I got the error :
Error in hsa_operand section, at offset 3552:
Address offset exceeds variable size
LLVM ERROR:
 Brig container validation has failed in BRIGAsmPrinter.cpp

What version of SGminer, what cards I have rx 470's doing 740kH/s at -I 13 using the old Gateless Gate v0.1.3-pre6

My bat launches using
sgminer.exe -k neoscrypt -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u Djxx..(my xvg address) -p c=XVG,4x470 -I 13

Now I can mine as you do above.. I am getting neoscrypt coins in my xvg wallet. I will get xvg coins as converted value of them? How can I calculate them as xvg profit made by my AMD gpus?

[Peasantfarmguy]

hey can anyone help please. I configured antminer with MUE address and I put the the symbol MUE, but zpool shows that i am mining dash. any advice will be greatly appreciated. thank you

[JaredKaragen]

can i receive Verge instead of Btc ?
Thanks
Henry

yes.

use a verge wallet address for username, and use a password similar to this example:
c=XVG,scrypt

[Peasantfarmguy]

can i receive Verge instead of Btc ?
Thanks
Henry

yes.

use a verge wallet address for username, and use a password similar to this example:
c=XVG,scrypt

so i can recieve xvg verge instead of dash?
I thought adding algo next to symbol was a no go on zpool?
thanks. Merry Christmas