▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[Peasantfarmguy]

Ok nm read the threads. Thats good new. Just like the birth of the GOOD NEWS.
So im new and whats this about changing difficulty level? i have it set the way zpool has for D3. thanks

[just.dont]

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

[uhro]

can i receive Verge instead of Btc ?
Thanks
Henry

yes.

use a verge wallet address for username, and use a password similar to this example:
c=XVG,scrypt

so i can recieve xvg verge instead of dash?
I thought adding algo next to symbol was a no go on zpool?
thanks. Merry Christmas

putting the algo there doesn't seem to do anything for my miners either way, as long as you have c=XXX for whatever coin you want (and a proper wallet for that coin), that's all you need to get going from my experience.

[alexjames2]

Please give me a correct settings for S9.
d=?

also, can i send my own parameter in password field, for example: minerid=1 ?

[jpouza]

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

yup, it's broken again 

[tws]

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

yup, it's broken again  

So I am using awesome miner and zpool and having the same issue where it’s only eporting about 2 MH/s does that mean I should mine something else or am I getting what my miner is saying?

[cryptominer420]

Now I can mine as you do above.. I am getting neoscrypt coins in my xvg wallet. I will get xvg coins as converted value of them? How can I calculate them as xvg profit made by my AMD gpus?

Correct the pool auto exchanges your neoscrypt coins to xvg, I mine using the following for my system manager, auto profit switcher, for nvidia I disable lyra2rev2 and blake2s, but for amd it works like a dream.
This calculates my estimated earnings as i have it setup to use 24hr best algo/miner so my 4 rx470 rig right now is estimated as earning 11.93/day after pool fee.
https://bitcointalk.org/index.php?topic=2059039.0

I am working on a fork of the legacy nicehash miner to make it compatible with all algo's on zpool but no eta on beta release yet.

[yapdakilla]

Question regarding last 50 earnings: once there are no more new shares to be sent to the exchanges or no more immature shares, do i need to restart awesome miner even though awesome miner is still submitting shares? Is this normal?

[jpouza]

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

yup, it's broken again  

So I am using awesome miner and zpool and having the same issue where it’s only eporting about 2 MH/s does that mean I should mine something else or am I getting what my miner is saying?

x17 reporting wrong hash too in the site...I think we should wait for an OP answer or target other pool.

[_javier_]

and XVG address is being recognized as UNOBTANIUM, when ccminer cmd line is perfect.

 

[guytechie]

Yep, nist5 is reporting too slow for me, too.

147 MH/s according to one of my rigs.  Pool says 2.9 MH/s.

[sundownz]

My mining payments have been nearly 2x what they normally are the last few days, I believe, primarily thanks to X17 / XVG. I cannot complain at all about my results since switching back =)

[Peasantfarmguy]

can i receive Verge instead of Btc ?
Thanks
Henry

yes.

use a verge wallet address for username, and use a password similar to this example:
c=XVG,scrypt

so i can recieve xvg verge instead of dash?
I thought adding algo next to symbol was a no go on zpool?
thanks. Merry Christmas

putting the algo there doesn't seem to do anything for my miners either way, as long as you have c=XXX for whatever coin you want (and a proper wallet for that coin), that's all you need to get going from my experience.

thanks for reply bro.what difficulty do you use for x11? thanks again

[kugr]

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

[cryptominer420]

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

[kugr]

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

I do get that, I guess I will have to wait till I get some better hardware. Thanks for the prompt reply.

[ukjack]

Just switched 50 S9s over to zpool as earnings are reportedly very high due to UNB coin.
Will report back earnings in 24hrs.

[eleutherios]

hi guys, can i ask what to put in c=XBT or BTC?
i am mining zcoin with bitcoin address at kraken 

[kirk4646]

hi guys.

is there a way i can set the minimum payout at all?

thanks

[aarons6]

@crackfoo

can you check the diff settings.. i think they are broken..

cgminer/4.9.2   d=512,c=XVG   sha256   32768

the diff is set to 512, yet its 32768.. :/


same with scrypt..
bfgminer/5.2.0-188-g   c=XVG,d=1024   scrypt   32768   

i have compacs and moonlander usbs.. they dont work with such a high diff.


edit it also doesnt matter what way i put the password
cgminer/4.9.2   c=XVG,d=512   sha256   32768