WitWolfy
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 18, 2018, 09:41:14 AM |
|
Site is still taking a beating... DDoS attacks perhaps?
|
|
|
|
Romario26
Newbie
Offline
Activity: 19
Merit: 0
|
|
January 18, 2018, 11:08:54 AM Last edit: January 18, 2018, 10:25:26 PM by Romario26 |
|
Dear, crackfoo look, please at http://www.zpool.cawith a pool something wrong my Rig's work continuously. in the section "Miners" my hashrate is truly displayed but in the section "Last 24 Hours Balance" in the last 5 hours there is no increase as though the mining stopped Thanks
|
|
|
|
WitWolfy
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 18, 2018, 12:48:22 PM |
|
I'm shocked to see for a site I always talk so highly of is so bad when it comes to feedback.
|
|
|
|
Bajula
Member
Offline
Activity: 166
Merit: 16
|
|
January 18, 2018, 02:42:21 PM |
|
maybe I missed something but when did dgc get removed? or is the wallet just dead? Forgive me if this has been asked and answered, I just got up and haven't read through everything yet.
|
|
|
|
yadenz
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 18, 2018, 03:02:07 PM |
|
I mined all day long (profit switching) and now I got only 7 coins in the "Last 50 Earnings" - no profit at all. Something's going wrong.
|
|
|
|
giveen1
Newbie
Offline
Activity: 70
Merit: 0
|
|
January 18, 2018, 07:32:23 PM |
|
Does Zpool support setting rig ID? For example in password "-p ID=Rig1" ?
Yeah, website seems to be flakly today, can't tell how my miner is reacting, as I'm at work.
|
|
|
|
GoldKimber
Newbie
Offline
Activity: 45
Merit: 0
|
|
January 18, 2018, 07:51:54 PM |
|
Does Zpool support setting rig ID? For example in password "-p ID=Rig1" ?
Yeah, website seems to be flakly today, can't tell how my miner is reacting, as I'm at work.
Try: .... -p <rigID>,c=<your coin preference> Works for a few of us. Do watch your payments closely after first setting this to make sure you didn't impact your payouts. There might be other/better ways to do this. Hope those folks will share those methods. -GK
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
January 18, 2018, 07:58:20 PM |
|
Does Zpool support setting rig ID? For example in password "-p ID=Rig1" ?
Yeah, website seems to be flakly today, can't tell how my miner is reacting, as I'm at work.
Try: .... -p <rigID>,c=<your coin preference> Works for a few of us. Do watch your payments closely after first setting this to make sure you didn't impact your payouts. There might be other/better ways to do this. Hope those folks will share those methods. -GK yes thats the way. Put your worker name in the beginning of the password: miner001,c=BTC miner002,c=BTC And so on.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
martin23
Newbie
Offline
Activity: 51
Merit: 0
|
|
January 18, 2018, 08:01:28 PM |
|
Hi crackfoo, why there are so many coins in status "New"? What does mean exactly "New"?
|
|
|
|
Bajula
Member
Offline
Activity: 166
Merit: 16
|
|
January 18, 2018, 08:23:40 PM |
|
Hi crackfoo, why there are so many coins in status "New"? What does mean exactly "New"?
It should mean "just found the block, not 100% that it isn't orphaned yet" or something along those lines.
|
|
|
|
Bajula
Member
Offline
Activity: 166
Merit: 16
|
|
January 18, 2018, 08:29:15 PM |
|
when trying to get paid in DigitalCoin DGC ....your site changes it DigiBye DGB with DGC address.... tried two different DGC addresses and the some thing happened.
strange thing is Ive been paid DGC with the same address last week
my DGC address is DKVSjRpp8dmGLQahf9P7zmmkadFkSJByvX
I hope this gets fixed soon so that i can use your pool again
thanx
Mine is DEhrrDM7sxgj6mN4XoVLiGbgYmgfRWZUcV and was paying out okay - but I wasn't checking it regular the last couple of days and then it just stopped sending, but at least it is in dgc.and has a balance so I'm assuming the wallet is dead/messedup/slightly confused, figure if the coin has been dropped from the pool there would be like a twitter thing or something on it. If I'm wrong well... he does say on the front page no guarantees if you mine anything but btc.
|
|
|
|
ntcryp
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 18, 2018, 08:32:47 PM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
|
|
|
|
variable42
Jr. Member
Offline
Activity: 38
Merit: 1
|
|
January 18, 2018, 08:53:05 PM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
Driver version can have an effect on hash rate. Though from personal experience, it's usually negligible. I'd guess the reason you see older versions in the benchmark data is mainly that it doesn't pose any benefit to do frequent driver upgrades. It'd just be wasted time. Especially for a rig which has many GPUs and a weak CPU. Upgrading can take a long time in certain cases. And then there's the risk that the newer driver will be buggy or introduce new problems. "If it ain't broken, don't fix it." As for neoscrypt profitability, multiply 0.45790 by your hashrate in MH/s, and the result is the value you would receive after a day of mining if that profitability estimate holds true, measured in milliBTC or mBTC. If you're being paid in something other than BTC, you'll get the equivalent amount of that coin when it's added to your balance.
|
|
|
|
ntcryp
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 18, 2018, 09:14:37 PM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
Driver version can have an effect on hash rate. Though from personal experience, it's usually negligible. I'd guess the reason you see older versions in the benchmark data is mainly that it doesn't pose any benefit to do frequent driver upgrades. It'd just be wasted time. Especially for a rig which has many GPUs and a weak CPU. Upgrading can take a long time in certain cases. And then there's the risk that the newer driver will be buggy or introduce new problems. "If it ain't broken, don't fix it." As for neoscrypt profitability, multiply 0.45790 by your hashrate in MH/s, and the result is the value you would receive after a day of mining if that profitability estimate holds true, measured in milliBTC or mBTC. If you're being paid in something other than BTC, you'll get the equivalent amount of that coin when it's added to your balance. thanks for the feedback for neoscrypt mining using Nvidia 1070 (4 card) i am getting 3080.4 kH/s. Is it good enough? also which miner will you recommend for these nvidia cards.
|
|
|
|
HardBlockMiner
Jr. Member
Offline
Activity: 224
Merit: 2
|
|
January 19, 2018, 12:07:00 AM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
Driver version can have an effect on hash rate. Though from personal experience, it's usually negligible. I'd guess the reason you see older versions in the benchmark data is mainly that it doesn't pose any benefit to do frequent driver upgrades. It'd just be wasted time. Especially for a rig which has many GPUs and a weak CPU. Upgrading can take a long time in certain cases. And then there's the risk that the newer driver will be buggy or introduce new problems. "If it ain't broken, don't fix it." As for neoscrypt profitability, multiply 0.45790 by your hashrate in MH/s, and the result is the value you would receive after a day of mining if that profitability estimate holds true, measured in milliBTC or mBTC. If you're being paid in something other than BTC, you'll get the equivalent amount of that coin when it's added to your balance. thanks for the feedback for neoscrypt mining using Nvidia 1070 (4 card) i am getting 3080.4 kH/s. Is it good enough? also which miner will you recommend for these nvidia cards. I'm using 4x1070 and getting ~4.3MH/s on Palgin miner at 85%power +150cc +300mc
|
|
|
|
WitWolfy
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 19, 2018, 06:58:52 AM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
Driver version can have an effect on hash rate. Though from personal experience, it's usually negligible. I'd guess the reason you see older versions in the benchmark data is mainly that it doesn't pose any benefit to do frequent driver upgrades. It'd just be wasted time. Especially for a rig which has many GPUs and a weak CPU. Upgrading can take a long time in certain cases. And then there's the risk that the newer driver will be buggy or introduce new problems. "If it ain't broken, don't fix it." As for neoscrypt profitability, multiply 0.45790 by your hashrate in MH/s, and the result is the value you would receive after a day of mining if that profitability estimate holds true, measured in milliBTC or mBTC. If you're being paid in something other than BTC, you'll get the equivalent amount of that coin when it's added to your balance. thanks for the feedback for neoscrypt mining using Nvidia 1070 (4 card) i am getting 3080.4 kH/s. Is it good enough? also which miner will you recommend for these nvidia cards. Too many miners on NeoScrypt IMO.. I run one 1080Ti and most of my coin mined percentages are always like 0.005% or something in that valley. Cant see how its a profitable pool AT ALL!
|
|
|
|
jkminkov
|
|
January 19, 2018, 09:59:07 AM |
|
I Am new to mining and using Nvidia cards GTX 1070 total 4cards i want to ask whether Nvidia cards software version affects the hashrate? because mine is updated version 390 while in zpool website i didnt see anyone using this version also please help how to calculate daily profit for the currency i am mining example CRC coin which shows (0.45790) what does this means? thanks
Driver version can have an effect on hash rate. Though from personal experience, it's usually negligible. I'd guess the reason you see older versions in the benchmark data is mainly that it doesn't pose any benefit to do frequent driver upgrades. It'd just be wasted time. Especially for a rig which has many GPUs and a weak CPU. Upgrading can take a long time in certain cases. And then there's the risk that the newer driver will be buggy or introduce new problems. "If it ain't broken, don't fix it." As for neoscrypt profitability, multiply 0.45790 by your hashrate in MH/s, and the result is the value you would receive after a day of mining if that profitability estimate holds true, measured in milliBTC or mBTC. If you're being paid in something other than BTC, you'll get the equivalent amount of that coin when it's added to your balance. thanks for the feedback for neoscrypt mining using Nvidia 1070 (4 card) i am getting 3080.4 kH/s. Is it good enough? also which miner will you recommend for these nvidia cards. on top of pool page, there is a benchmark section, check there, also click on miners then on algo, you'll see types of miners connected and versions.
|
.:31211457:. 100 dollars in one place talking - Dudes, hooray, Bitcoin against us just one, but we are growing in numbers!
|
|
|
RedRoverZA
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 19, 2018, 12:26:25 PM |
|
Hi crackfoo, why there are so many coins in status "New"? What does mean exactly "New"?
Yeah. This is bothering me too. It seems to have a negative affect on your earnings if your miner switches away to another algo before they switch status to immature.
|
|
|
|
joshivince
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 19, 2018, 05:48:50 PM Last edit: January 19, 2018, 10:45:06 PM by joshivince |
|
Hi there,
can someone help me?
Have a Moonlander 2 and want to mine DGB at zpool. Here my config:
./bfgminer -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u <wallet address> -p c=DGB -S MLD:all --set MLD:clock=600
> Mac OS x 10.13 > Disabled SIP, installed UART VPC Driver (v5), reactivated SIP afterwards > Software: bfgminer-5.4.2-futurebit2-mac64
Error message at startup: [2018-01-19 18:48:06] Waiting for devices; press 'M+' to add, or 'Q' to quit
He can't find my device. Already tried M + all and so on... No chance...
TY in advance, Vincent
|
|
|
|
crackfoo (OP)
Legendary
Offline
Activity: 3556
Merit: 1126
|
|
January 19, 2018, 06:09:56 PM |
|
XVG is reenabled again on all algos.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
|