▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[crackfoo]

I would really like to mine for some LINDA coin so I added the currency in the c= option. But zpool is showing me that there is a shortage with this coin. This has been the case for about 2 weeks now. Will there be some LINDA coins to mine in the future?

I'll try it one more time but the wallet constantly reject blocks with some error about the time is too far in the past or something. It was a huge drain on profitability and will probably be dropped.

[erdrickk]

thank you for the btc payout, it works. I've been running c=CRC for hours and have 6 crowd coins, 2 verified but no payout - is there still a payout delay on other coins?

https://image.prntscr.com/image/GMVcyoLSS2_saDLoyjq-qQ.png

[djn053]

I used zpoolminer.
what happen today?
No hashrate display in zpool.ca,no income coins,
but zpoolminer still show me 42GH/s blake2s.

whats your address?

1QBsuEDkzbWa5pbda2j14in9eNQGerbsV3

I working on it ， my machine just show me  Yes！ Yes！
But zpool show me the hashrate look like sawtooth，I think I lost something.
what do you think?
http://prntscr.com/i9j9rr
https://image.prntscr.com/image/sey3bW7AQ3qszNxziV8PJQ.png

[JaredKaragen]

xevan port;  miners report a pretty low hashrate for the gear hooked up.

Happened starting when the frontend in-and-out started.  Example address is the batch file address: 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP

One miner is ~5Mh, and the two others are 3.0 and 3.5Mh....  Seeing an average of 100Mh on the network, but im only getting 3% on frontend....  looking at the pool statistics for the port, I am wondering if all users or just I am seeing this.

[sundownz]

zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing.  Thus, appearing down.

If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank.  Yes, it's very annoying.

1 query every 10s is the limit.

I assume this is done by IP address?

I have a huge number of workers at one location so I end up having machines get stuck on the same algo for many hours as they cannot get an API update.

Any ideas on a possible solution ? Is there a way to have the API check by IP & also the Worker ID -- I do assign each worker a unique ID.

[jagauthier]

zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing.  Thus, appearing down.

If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank.  Yes, it's very annoying.

1 query every 10s is the limit.

I assume this is done by IP address?

I have a huge number of workers at one location so I end up having machines get stuck on the same algo for many hours as they cannot get an API update.

Any ideas on a possible solution ? Is there a way to have the API check by IP & also the Worker ID -- I do assign each worker a unique ID.

The API has no idea about your worker ID.  It's just an HTTP call.

[sundownz]

zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing.  Thus, appearing down.

If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank.  Yes, it's very annoying.

1 query every 10s is the limit.

I assume this is done by IP address?

I have a huge number of workers at one location so I end up having machines get stuck on the same algo for many hours as they cannot get an API update.

Any ideas on a possible solution ? Is there a way to have the API check by IP & also the Worker ID -- I do assign each worker a unique ID.

The API has no idea about your worker ID.  It's just an HTTP call.

I see. ZPOOL is my favorite but with so many workers on one IP algorithm switching simply doesn't work correctly.

I've been on Ahashpool for a week or so now and I simply don't like it as much for various reasons (slow stats, less info on the stats page, fewer coins, etc)... but the API doesn't time out and things swap as they are supposed to.

[jagauthier]

zpool's API has some kind of limitation on it. If you poll it too quickly it returns nothing.  Thus, appearing down.

If my miner has just polled the API, and then I restart it, 9 times out of 10 the API return is blank.  Yes, it's very annoying.

1 query every 10s is the limit.

I assume this is done by IP address?

I have a huge number of workers at one location so I end up having machines get stuck on the same algo for many hours as they cannot get an API update.

Any ideas on a possible solution ? Is there a way to have the API check by IP & also the Worker ID -- I do assign each worker a unique ID.

The API has no idea about your worker ID.  It's just an HTTP call.

I see. ZPOOL is my favorite but with so many workers on one IP algorithm switching simply doesn't work correctly.

I've been on Ahashpool for a week or so now and I simply don't like it as much for various reasons (slow stats, less info on the stats page, fewer coins, etc)... but the API doesn't time out and things swap as they are supposed to.

Yeah, the API limitation is archaic.  Any decent service should be able to handle calls to its API without a problem.

[HardBlockMiner]

I would really like to mine for some LINDA coin so I added the currency in the c= option. But zpool is showing me that there is a shortage with this coin. This has been the case for about 2 weeks now. Will there be some LINDA coins to mine in the future?

I'll try it one more time but the wallet constantly reject blocks with some error about the time is too far in the past or something. It was a huge drain on profitability and will probably be dropped.

Did you take Linda offline again?

Le4Dmz9MNwYHUx8bV44yMuQVddWE8KBADR

Everything was running fine until this morning and now its all wonky.

[crackfoo]

I would really like to mine for some LINDA coin so I added the currency in the c= option. But zpool is showing me that there is a shortage with this coin. This has been the case for about 2 weeks now. Will there be some LINDA coins to mine in the future?

I'll try it one more time but the wallet constantly reject blocks with some error about the time is too far in the past or something. It was a huge drain on profitability and will probably be dropped.

Did you take Linda offline again?

Le4Dmz9MNwYHUx8bV44yMuQVddWE8KBADR

Everything was running fine until this morning and now its all wonky.

yup, LINDA is done. way too many rejects.

[malthrax]

I have a huge number of workers at one location

Stratum Proxy, my friend.

[bsobel]

I'm away travelling BTC payouts will resume Friday night. They require manual approval which I can't access at the moment do to my own misconfiguration.

In case you hadn’t noticed already BTC payouts have already been sent.
Cheers

Payouts seemed to have stopped again (nothing for over 24 hours).   Are you still having to do them manually?  Do you have an ETA on when the configuration issue you mentioned would be fixed?

[crackfoo]

I'm away travelling BTC payouts will resume Friday night. They require manual approval which I can't access at the moment do to my own misconfiguration.

In case you hadn’t noticed already BTC payouts have already been sent.
Cheers

Payouts seemed to have stopped again (nothing for over 24 hours).   Are you still having to do them manually?  Do you have an ETA on when the configuration issue you mentioned would be fixed?

payouts were only delayed wed/thur. It's back to regular schedule now.

[bsobel]

I'm away travelling BTC payouts will resume Friday night. They require manual approval which I can't access at the moment do to my own misconfiguration.

In case you hadn’t noticed already BTC payouts have already been sent.
Cheers

Payouts seemed to have stopped again (nothing for over 24 hours).   Are you still having to do them manually?  Do you have an ETA on when the configuration issue you mentioned would be fixed?

payouts were only delayed wed/thur. It's back to regular schedule now.

Then FYI something new may be going on, I have no payments for 24 hours and was well over the threshold (a few multiples of it).  Wallet 1BsUAfX7dLinbyiipSRUgbgyfp8GzJMHtb  Any chance you can post the BTC payment time in addition to the rolling 4 hour payout time for other currencies?  That would help to know when expect BTC payments, as (honestly) I originally didn't catch the 'next payout' referee to the 4 hour payouts for other coins.  As always, thank you for everything!

[yama84]

Hi.

I have been trying this pool for about 3 days and everything was working fine (perhaps some glitches on the frontend but not a major issue).
But in the last hour I have seen my total balance has been reduced . My main coin is Verge (XVG) .At the first sight I thought maybe it would be exchange for coins, but after I realized it just nulled all SHIELD coins mBTC values as you can see in the picture below:

https://imgur.com/4SwUguV

Is there any way to fix this issue?

Thank you in advance.

[sundownz]

I have a huge number of workers at one location

Stratum Proxy, my friend.

I don't know much about this -- is there a popular link to learn more about setting one up / pointing it at ZPOOL with a front-end switcher (I am using Nemosminer) or just Google is my friend ?

Thanks =)

[Hadji]

who say me what is (((( ninja )))) in zpool, how mining this&

[Straya1]

pool its apsolut banana mining gobyte always get paid no problem just now pool just change my byte address to Granite coin i mean WTF they send GNR to my gobyte wallet but never got ,this is not first time zpool stuge me up for

[HardBlockMiner]

I would really like to mine for some LINDA coin so I added the currency in the c= option. But zpool is showing me that there is a shortage with this coin. This has been the case for about 2 weeks now. Will there be some LINDA coins to mine in the future?

I'll try it one more time but the wallet constantly reject blocks with some error about the time is too far in the past or something. It was a huge drain on profitability and will probably be dropped.

Did you take Linda offline again?

Le4Dmz9MNwYHUx8bV44yMuQVddWE8KBADR

Everything was running fine until this morning and now its all wonky.

yup, LINDA is done. way too many rejects.

Bummer.  I guess I'm mining for you this weekend on that card.

[bsobel]

Hi.

I have been trying this pool for about 3 days and everything was working fine (perhaps some glitches on the frontend but not a major issue).
But in the last hour I have seen my total balance has been reduced . My main coin is Verge (XVG) .At the first sight I thought maybe it would be exchange for coins, but after I realized it just nulled all SHIELD coins mBTC values as you can see in the picture below:

https://imgur.com/4SwUguV

Is there any way to fix this issue?

Thank you in advance.

From Twitter:  We’ve disabled @StocksExchangeR because they’re not sending BTC. Coins found just on that exchange will show as 0 BTC value until the exchange sends the BTC and is reenabled.