minerstat: mining OS + ASIC monitoring + Windows mining

[ramazgeo]

Unable to download, user and password required.

[1714855921]

1714855921

[1714855921]

1714855921

[1714855921]

1714855921

[1714855921]

1714855921

[coinscrow]

Unable to download, user and password required.

resolved

[discipline45]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

[coinscrow]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

did you see the boot (splash) screen with mountains etc.. ?

try to enter CTRL + ALT + F1

and type mrecovery if you experience problems.

[discipline45]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

did you see the boot (splash) screen with mountains etc.. ?

try to enter CTRL + ALT + F1

and type mrecovery if you experience problems.

Thanks for fast response! Heres video showcasing more. No mountains or anything https://vimeo.com/257279044

[coinscrow]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

did you see the boot (splash) screen with mountains etc.. ?

try to enter CTRL + ALT + F1

and type mrecovery if you experience problems.

Thanks for fast response! Heres video showcasing more. No mountains or anything https://vimeo.com/257279044

did you tried to plug in to the second GPU "the first x16 slot" mostly counted from the CPU. (octominer only has x16 slot)
try to plug to the second. there is some boot menu where you can select the USB to boot?

is UEFI enabled on motherboard? Need to show the grub menu its just seems no system installed.

[discipline45]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

did you see the boot (splash) screen with mountains etc.. ?

try to enter CTRL + ALT + F1

and type mrecovery if you experience problems.

Thanks for fast response! Heres video showcasing more. No mountains or anything https://vimeo.com/257279044

did you tried to plug in to the second GPU "the first x16 slot" mostly counted from the CPU. (octominer only has x16 slot)
try to plug to the second. there is some boot menu where you can select the USB to boot?

is UEFI enabled on motherboard? Need to show the grub menu its just seems no system installed.

Fixed it- problem was I was using wifi instead of ethernet.

Now it boots up and gets pretty far - it launches the background hardware service and starts displaying mining rig stats.
But I get an error on repeat saying "minerstat.com package error"

[coinscrow]

Hello! I used the supplied program to flash the OS to a usb, then plugged it into my octominer (which has 8 gpus in it). In bios, I disabled intergrated graphics and set it to pcie graphics. It boots and octominer appears to access the usb, but then after a few minutes nothing happens. I get no visual output.

did you see the boot (splash) screen with mountains etc.. ?

try to enter CTRL + ALT + F1

and type mrecovery if you experience problems.

Thanks for fast response! Heres video showcasing more. No mountains or anything https://vimeo.com/257279044

did you tried to plug in to the second GPU "the first x16 slot" mostly counted from the CPU. (octominer only has x16 slot)
try to plug to the second. there is some boot menu where you can select the USB to boot?

is UEFI enabled on motherboard? Need to show the grub menu its just seems no system installed.

Fixed it- problem was I was using wifi instead of ethernet.

Now it boots up and gets pretty far - it launches the background hardware service and starts displaying mining rig stats.
But I get an error on repeat saying "minerstat.com package error"

on what miner?

make sure you are including API parameters in your config editor

[discipline45]

anyone else getting blurry text on the website?

[coinscrow]

anyone else getting blurry text on the website?

Join our Slack to we can live-chat.

https://join.slack.com/t/minerstat/shared_invite/MjI0MzcyODMzNDEzLTE1MDIyODE3NTktNDFmOWI1MzVhOA

[bit4boy]

Hello

I use minerstat with 2 rig

- RIG4 --> 8xRX570 win10 all ok

- RIG0 --> 1xRX580 Minerstat OS testing

After boot I have this message ... Minerstat.com: Package Error [RIG0]

My Claymore Dual config file is like this and I don't use overclocking page (same win10 config file) :

-eworker xxxx.rig0
-epool europe.ethash-hub.miningpoolhub.com:20535
-ewal xxxx.rig0
-epsw x
-mode 0
-dcri 4
-esm (AUTO)
-mport -3333
-epsw x
-mode 0
-dcri 4
-tstop 85
-tt 55
-fanmin 40
-fanmax 75
-cclock 1110
-mclock 2120
-cvddc 825
-mvddc 825

Have you a solution?

Regards

Bit4Boy

[coinscrow]

Hello

I use minerstat with 2 rig

- RIG4 --> 8xRX570 win10 all ok

- RIG0 --> 1xRX580 Minerstat OS testing

After boot I have this message ... Minerstat.com: Package Error [RIG0]

My Claymore Dual config file is like this and I don't use overclocking page (same win10 config file) :

-eworker xxxx.rig0
-epool europe.ethash-hub.miningpoolhub.com:20535
-ewal xxxx.rig0
-epsw x
-mode 0
-dcri 4
-esm (AUTO)
-mport -3333
-epsw x
-mode 0
-dcri 4
-tstop 85
-tt 55
-fanmin 40
-fanmax 75
-cclock 1110
-mclock 2120
-cvddc 825
-mvddc 825

Have you a solution?

Regards

Bit4Boy

Code:

-mport -3333

change to:

Code:

-mport 3333

[mad4more]

Hi ...

Concerning overclocking, undervolting in Minerstat Linux OS.

My GPUs have been modded with better straps.
Overclocking and undervolting does not seem to work in the Minerstat Linux OS.

I'm getting very low hash rates mining ETH - only 8Mh/s.
With Windows i get about 30MH/s.

Cheers, any help appriciated.

[rossr1]

hi, when do you plan on adding rx vega support?

[Pujitsu]

Giving Minerstat a shot on Windows. Works well for the most part, but having an issue with the Pool configuration for EWBF-ZEC. I updated the address for the User and Pool, but the Configuration Editor still defaults to the "FlyPool" address. I had to manually change the configuration by adding the new server address, and that seemed to work fine.

Shouldn't modifying the Address in the Web UI also update the Configuration file?

[coinscrow]

Giving Minerstat a shot on Windows. Works well for the most part, but having an issue with the Pool configuration for EWBF-ZEC. I updated the address for the User and Pool, but the Configuration Editor still defaults to the "FlyPool" address. I had to manually change the configuration by adding the new server address, and that seemed to work fine.

Shouldn't modifying the Address in the Web UI also update the Configuration file?

You will need to use only Config Editor currently. Address Editor just for Profit Switch but we currently making improvements on the whole system. You will see in a short time.

hi, when do you plan on adding rx vega support?

for the OS? yes in the forthcoming versions

Hi ...

Concerning overclocking, undervolting in Minerstat Linux OS.

My GPUs have been modded with better straps.
Overclocking and undervolting does not seem to work in the Minerstat Linux OS.

I'm getting very low hash rates mining ETH - only 8Mh/s.
With Windows i get about 30MH/s.

Cheers, any help appriciated.

Strange, did you tried to plug a hdmi to that gpu?

[RigMaster]

Does minerstat work with older AMD cards?
I've got a R9 200 series mining rig (3x R9 290 and 3x R9 290X) - does Minerstat have ability to control the fan/temp and OC for these cards? how about UV?

[coinscrow]

Does minerstat work with older AMD cards?
I've got a R9 200 series mining rig (3x R9 290 and 3x R9 290X) - does Minerstat have ability to control the fan/temp and OC for these cards? how about UV?

No currently we not support these cards on the OS, with Windows you can use it.

[infectedmushi]

possible to add two RVN miners support?

one is nevermore miner: https://github.com/brian112358/nevermore-miner/

the other is suprminer: https://github.com/ocminer/suprminer

both work, but i only get gpu temp and fans stats, but no stats of

is it possible to reduce the time the minerstat client gets the new config and restart?

thanks and keep up the good work.

[coinscrow]

possible to add two RVN miners support?

one is nevermore miner: https://github.com/brian112358/nevermore-miner/

the other is suprminer: https://github.com/ocminer/suprminer

both work, but i only get gpu temp and fans stats.

is it possible to reduce the time the minerstat client gets the new config and restart?

thanks and keep up the good work.

suprminer is already added, if you want to use nevermore replace cminer-x16r folder ccminer.exe with nevermore one.