[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[dragonmike]

Ok - I've been running alexis on my 5x1080 rig for two days now and it hasn't dropped a card so far. I think I'll stick to 2.0.6 in that case as it seems reliable. Worst case I've set Speedfan to monitor temps and reboot the rig if any card idles for more than 3 minutes. Seems to work. Last night it didn't reboot at all.

[okorieemmanuel]

Wow! Minerx117 u are doing a nice job. I commend u 4 it!!!  I stayed up all night to compile a ccminer some days ago and what I did cannot be compared to what u have done. Great work!!! My question is most of your program have been configured for zpool. Y don't u make at least one exclusively for miningpoolhub novice users like me. I have a small faucet, http://emmonfaucet.ga and would love to put some coins in it. Pleassssssssssssssse help D novice/ beginners like me.


Thumbs up!!!!



Once again, Thank you!!!

[creat326]

Does it support Claymore dual mining? I don't think there's anything more profitable than that right now and if it's not included .... all you gonna do is earn less than it all the time.

This is a fair question. No answer?

[okorieemmanuel]

Does it support Claymore dual mining? I don't think there's anything more profitable than that right now and if it's not included .... all you gonna do is earn less than it all the time.

This is a fair question. No answer?

Who cares about this?  First and foremost,  a novice will love to use a miner which is easy to use with less sophisticated input of commands...  I once use claymore dual mining with my little zotac gtx 730 4gb graphics card (compute capabilities 3.5). I received all sorts of error messages up to D extent that I got fed up with that crap!

Secondly, claymore is mainly for 5.0 gpu and higher....... This GURR Minerx117 has compiled a strong contender for even lesser gpu like my own and u are saying such negative comment!?? 

Your manner of approach needs serious adjustments.

Please give this guy some credits 4 goodness sake......

SMH?! 

[minestro]

Does it support Claymore dual mining? I don't think there's anything more profitable than that right now and if it's not included .... all you gonna do is earn less than it all the time.

This is a fair question. No answer?

Who cares about this?  First and foremost,  a novice will love to use a miner which is easy to use with less sophisticated input of commands...  I once use claymore dual mining with my little zotac gtx 730 4gb graphics card (compute capabilities 3.5). I received all sorts of error messages up to D extent that I got fed up with that crap!

Secondly, claymore is mainly for 5.0 gpu and higher....... This GURR Minerx117 has compiled a strong contender for even lesser gpu like my own and u are saying such negative comment!?? 

Your manner of approach needs serious adjustments.

Please give this guy some credits 4 goodness sake......

SMH?! 

First, obviously at least 2 people care about this. Second, since when is asking a neutral question bad manners? Why has every form of criticism to interpreted as bullshiting on someone's work. Constructive criticism and asking questions are some of the most important parts in keeping a software project alive, besides transparency (like putting the donation flag into the FAQ and short description) and other things.

[dragonmike]

I'll try to answer.

I think it adds a level of complexity, i.e. It would have to calculate the combined returns of say ETH+DCR at a given intensity level for your specific card.

It's probably not impossible to compile but probably not a priority as dual-mining doesn't even yield very much on most nVidia cards as far as I'm aware.

[iEzJay]

Hey guys, I currently have my personal PC mining as well and I'm running into an issue where I needed to add a secondary GPU because I'm out of space elsewhere on the rigs however I cannot seem to find the exact command to select the device to use with nemosminer or how to exclude.

I've tried the following.
-d
-device
-di
-exclude

I know somewhere around 360 post the command was added but no syntax or info was given on how to use it. If anyone could help I would greatly appreciate it.

[sypher9]

Hey guys, I currently have my personal PC mining as well and I'm running into an issue where I needed to add a secondary GPU because I'm out of space elsewhere on the rigs however I cannot seem to find the exact command to select the device to use with nemosminer or how to exclude.

I've tried the following.
-d
-device
-di
-exclude

I know somewhere around 360 post the command was added but no syntax or info was given on how to use it. If anyone could help I would greatly appreciate it.

This is not supported on v2 of Nemosminer. Download V1 (see first post) and edit the .bat file. You will see something like 0,1,2,3,4,5,6 at the top of the file, which represents the GPU number.

[nonpsyco@gmail.com]

Hye, I've been using this miner for some time now and i can just say that its amazing, my profits have never been higher. so i just would like to thank you for sharing this and may i ask, can this work with other pools?.

[iEzJay]

This is not supported on v2 of Nemosminer. Download V1 (see first post) and edit the .bat file. You will see something like 0,1,2,3,4,5,6 at the top of the file, which represents the GPU number.

Yeah I was able to get it working now that I have the V1.7 - I wonder if there are any plans to adding this to the v2 given the fact I run two different GPU's none of which are part of the 4 files already pre-set there.

Thank you for the help.

[minerx117]

Does it support Claymore dual mining? I don't think there's anything more profitable than that right now and if it's not included .... all you gonna do is earn less than it all the time.

This is a fair question. No answer?

Question: Does it support Claymore dual mining?  
Answer : NO it does not

[flminer]

Just tried to run a 7x 1080 ti rig and the miner only recognizes 6 cards.... are you going to increase that number? With the new 12 gpu motherboards out it would be good to have miners that support that. Thanks

[minerx117]

Just tried to run a 7x 1080 ti rig and the miner only recognizes 6 cards.... are you going to increase that number? With the new 12 gpu motherboards out it would be good to have miners that support that. Thanks

go into control panel:

system:

device manager:

display adapters: how many is it showing in there ? 6 or 7 ?

There is no limit it will use how many cards it has available.. it should work fine with 12 gpu's  (altho windows can't support 12 atm)

[flminer]

Just tried to run a 7x 1080 ti rig and the miner only recognizes 6 cards.... are you going to increase that number? With the new 12 gpu motherboards out it would be good to have miners that support that. Thanks

go into control panel:

system:

device manager:

display adapters: how many is it showing in there ? 6 or 7 ?

There is no limit it will use how many cards it has available.. it should work fine with 12 gpu's  (altho windows can't support 12 atm)

Show's 7 in device manager

[minerx117]

Just tried to run a 7x 1080 ti rig and the miner only recognizes 6 cards.... are you going to increase that number? With the new 12 gpu motherboards out it would be good to have miners that support that. Thanks

go into control panel:

system:

device manager:

display adapters: how many is it showing in there ? 6 or 7 ?

There is no limit it will use how many cards it has available.. it should work fine with 12 gpu's  (altho windows can't support 12 atm)

Show's 7 in device manager

not sure then.. have you tried running ccminer or ewbf manually to see if it picks up all 7?  my biggest rig is 6x1070 and it works fine.. i can't test myself as i don't have a 7 card rig...

[flminer]

Just tried to run a 7x 1080 ti rig and the miner only recognizes 6 cards.... are you going to increase that number? With the new 12 gpu motherboards out it would be good to have miners that support that. Thanks

go into control panel:

system:

device manager:

display adapters: how many is it showing in there ? 6 or 7 ?

There is no limit it will use how many cards it has available.. it should work fine with 12 gpu's  (altho windows can't support 12 atm)

Show's 7 in device manager

not sure then.. have you tried running ccminer or ewbf manually to see if it picks up all 7?  my biggest rig is 6x1070 and it works fine.. i can't test myself as i don't have a 7 card rig...

that will have to wait till the weekend. also saw that msi afterburner only saw 6 cards so might be that is the problem and will have to run them manually. appreciate it!

[dragonmike]

Jmtc: I cannot run afterburner on my 7-gpu rigs. It'll crash the whole system upon applying clocks at startup. Not sure where the limitation is.

[dragonmike]

Nemo, is there a way to enable watchdog/debug mode? The rig rebooted a few times then completely hung last night but the logs don't give enough detail to know what actually happened...

[guytechie]

Is there any way to adjust the difficulty for each algo?

Right now I'm interested in adjusting the Equihash algo because zpool is defaulting difficulty to 200, which makes finding shares much longer.  Before, it would settle at 127, but even then the shares are too infrequent.  I would like to adjust to down to say 50 to see how it goes.

[pindis]

Is there any way to adjust the difficulty for each algo?

Right now I'm interested in adjusting the Equihash algo because zpool is defaulting difficulty to 200, which makes finding shares much longer.  Before, it would settle at 127, but even then the shares are too infrequent.  I would like to adjust to down to say 50 to see how it goes.

I'm interested in this aswell