minerx117 (OP)
Sr. Member
 Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
 |
November 15, 2017, 12:31:31 AM |
|
Hashrefinery on wallet page says Note: Minimum payout for this wallet is 1 BTC WTF Yeah what gives? Mine says the same can anyone confirm? It must be a mistake. The owner is a cool dude; He's working constantly to improve his pool and the frontend. Don't start worrying yet. The original "Home" page still says: "Payouts are made automatically every 8 hours for all balances above 0.0025, or 0.00025 on Sunday." From hashrefinery Hey there, There have been a few PMs so this is a generic response I am sending. Feel free to reply if you need more info. Due to a large influx of transactions on the Bitcoin network (BTC to be specific) the pool is having difficulty withdrawing funds from currency exchanges. The withdrawal requests are processed but some exchanges are setting a tx fee too low for the transaction to be confirmed by the network. The result is pool BTC funds are getting held up in unconfirmed transactions and not making it back to the hot wallet at regular intervals. If the pool software tries to make a payout run when there are insufficient funds it causes problems that need to be manually fixed by the admin to reverse the failed transactions for each miner. It is preferable to avoid this problem from occurring in the first place. For the time being a minimum 1 BTC payout balance has been set for auto payments. No miner will reach this threshold so the setting effectively disabled auto payments on the normal schedule. When the pool hot wallet has sufficient funds to make a successful payout run it will be triggered manually, regardless of whether or not it is at a schedule time. This policy will remain in place until the BTC network stabilizes and then auto payouts will resume as normal. Other coins continue to pay out on the regular schedule. Thanks for your patience during this period. Thank you for the response HashRefinery best Regards Nemo |
NemosMiner-v3.8.1.3
|
|
|
|
|
|
|
|
"The nature of Bitcoin is such that once version 0.1 was released, the
core design was set in stone for the rest of its lifetime." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
cockblock
Newbie
Offline
Activity: 35
Merit: 0
|
|
November 15, 2017, 11:32:49 AM |
|
Has anyone been able to add the following pools?
italyiimp.com, says it converts coins to BTC
crypto.n-engine.com, says dont use a btc address
Could someone be so kind to update the github with these pools
|
|
|
|
|
|
BitBustah
|
|
November 15, 2017, 12:08:44 PM |
|
Has anyone been able to add the following pools?
italyiimp.com, says it converts coins to BTC
crypto.n-engine.com, says dont use a btc address
Could someone be so kind to update the github with these pools
It's easy. They all use the YiiMP script. Shouldn't take longer than 5 mins.  Edited to add: You can check the N-Engine hashrates here: http://pools.you-stupid-woman.com/ |
|
|
|
|
allpozitiv
Jr. Member
Offline
Activity: 420
Merit: 1
|
|
November 16, 2017, 07:40:33 PM |
|
Has anyone been able to add the following pools?
italyiimp.com, says it converts coins to BTC
crypto.n-engine.com, says dont use a btc address
Could someone be so kind to update the github with these pools
It's easy. They all use the YiiMP script. Shouldn't take longer than 5 mins. Edited to add: You can check the N-Engine hashrates here: http://pools.you-stupid-woman.com/Have you succeed with editing of correct pool.ps1 file with italyiimp.com conf? Could you share this here or even in PM, please. |
|
|
|
|
|
BitBustah
|
|
November 16, 2017, 08:03:37 PM |
|
Has anyone been able to add the following pools?
italyiimp.com, says it converts coins to BTC
crypto.n-engine.com, says dont use a btc address
Could someone be so kind to update the github with these pools
It's easy. They all use the YiiMP script. Shouldn't take longer than 5 mins. Edited to add: You can check the N-Engine hashrates here: http://pools.you-stupid-woman.com/Have you succeed with editing of correct pool.ps1 file with italyiimp.com conf? Could you share this here or even in PM, please. Something I made really quick. Not sure if it is 100% but the owner of Nemo might release his version. http://you-stupid-woman.com/italyiimp.rar |
|
|
|
|
allpozitiv
Jr. Member
Offline
Activity: 420
Merit: 1
|
|
November 16, 2017, 08:32:59 PM |
|
Has anyone been able to add the following pools?
italyiimp.com, says it converts coins to BTC
crypto.n-engine.com, says dont use a btc address
Could someone be so kind to update the github with these pools
It's easy. They all use the YiiMP script. Shouldn't take longer than 5 mins. Edited to add: You can check the N-Engine hashrates here: http://pools.you-stupid-woman.com/Have you succeed with editing of correct pool.ps1 file with italyiimp.com conf? Could you share this here or even in PM, please. Something I made really quick. Not sure if it is 100% but the owner of Nemo might release his version. http://you-stupid-woman.com/italyiimp.rarAnyway, great thanks for share, I will check. Appreciate your kind reply, mate. |
|
|
|
|
naimc3243
Newbie
Offline
Activity: 27
Merit: 0
|
|
November 17, 2017, 01:55:04 AM |
|
Nemo's I have been using your miners for a few month and I love the simplicity of the automatic coin selection and auto sell and BTC deposit.
With the current situation of BTC fee's being so high do you think it would be better if pools switch to an other currency for the auto payout.
I would like to know what type of wallets you are using ? I must not be only smaller miner wondering how to deal with the BTC transfer fees eating all my profits
I have been using Jaxx for a while and just noticed today that on a typical deposit of .000250 BTC I pay a mining fee of 0.024 BTC ! Basically I am making nothing just paying fees !
|
|
|
|
|
|
nostrakhan
|
|
November 17, 2017, 03:05:51 AM |
|
Nemo's I have been using your miners for a few month and I love the simplicity of the automatic coin selection and auto sell and BTC deposit.
With the current situation of BTC fee's being so high do you think it would be better if pools switch to an other currency for the auto payout.
I would like to know what type of wallets you are using ? I must not be only smaller miner wondering how to deal with the BTC transfer fees eating all my profits
I have been using Jaxx for a while and just noticed today that on a typical deposit of .000250 BTC I pay a mining fee of 0.024 BTC ! Basically I am making nothing just paying fees !
You could have the pool send your btc payments directly to the exchange you use. Then on the exchange you can either hold your btc there, or exchange them to whatever you prefer. Then if you are going to send your btc out of the exchange, consider selling your btc for ltc or something else that has lower fees, so that you don't have to pay the high btc fees required to send the btc. |
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
November 18, 2017, 12:32:12 AM |
|
added: Polytimos support
|
NemosMiner-v3.8.1.3
|
|
|
muilfa
Newbie
Offline
Activity: 41
Merit: 0
|
|
November 18, 2017, 06:51:39 AM |
|
And how to properly do you need to re-download the archive and pass the tests or is there an easier way?
|
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
November 18, 2017, 07:31:03 PM |
|
NemosMiner-v2.2 Zpool / NiceHash / ahashpool / hashrefinery / MiningPoolHubhttps://github.com/nemosminer/NemosMiner-v2.2/archive/master.zipv2.2 (tested with 1060's , 1070's and 1080ti's) Enabled: Xevan,Hsr,Phi,Polytimos Algo's Updated: ccminers Added: -SelGPU Added: USD/AUD/GBP/NZD etc per day Added: Current BTC price NemosMiner-v2.2 Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners edit: start.bat 1.change BTC address to yours 2.select how many gpu's you have eg: (1gpu ewbf 0 cc 0) (default 2 gpu ewbf 0 1 cc 0,1) (6gpu ewbf 0 1 2 3 4 5 cc 0,1,2,3,4,5) 3.remove any algos you do not want to mine (default all supported algos enabled) 4.there is a default 5minute per day fee, that can be disabled by changing -Donate 5 to 0 5.run start.bat If you have Windows 7, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145running multiple cards its recommended to increase Virtual Memory 32gb-64gb is optimal requires Nvidia Driver Newer than 384 for cuda 9 Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1165
My AR-15 ID's itself as a toaster. Want breakfast?
|
|
November 18, 2017, 07:58:55 PM |
|
FYI I did a test on polytimos.
I suggest that everyone disable / wait until it sells on a market for a value worthwhile. But; it draws almost 1/2 the wattage... so, if it does jump up in price, it should be very nice for the hardware.
Almost 2 days of mining on the equivalent of 2x 1070; and I only got ~0.000008BTC. I would have had a LOT more than that if I had stuck to another algo.
I think I switched my test rigs over within 10-20 min of the algo being enabled.
Just an FYI.
|
|
|
|
amitim
Newbie
Offline
Activity: 59
Merit: 0
|
|
November 18, 2017, 09:20:04 PM |
|
could you number the versions when making any corrections? For example "v2.2.xxx" |
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
November 19, 2017, 12:36:26 AM
Last edit: November 19, 2017, 01:36:13 AM by jebidia |
|
Hi All,
I've noticed that when switching some algos take a long time to reach their full potential/benchmarked speed. I'm assuming there's nothing I can do to speed that up but I thought I'd ask. It's just interesting how some lock up fully within 15-20 seconds and others can take several minutes.
Thanks
jb
|
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
November 19, 2017, 08:11:44 AM |
|
could you number the versions when making any corrections? For example "v2.2.xxx" i could but changes were minor just added another algo... both page 1 link and above links are all downloading the same latest version... 2.3 will be out soon... ill change version then. I could do a intermediate release of the code how it is now as 2.2.1 as it has change quite a bit since 2.2 release... if you would like.... Sorry for any confusion Best Regards Nemo |
NemosMiner-v3.8.1.3
|
|
|
AndyPants
Newbie
Offline
Activity: 6
Merit: 0
|
|
November 19, 2017, 08:13:30 PM |
|
Looking forward to 2.3
I've been using the latest version all day and working well.
|
|
|
|
|
elmutus
Newbie
Offline
Activity: 29
Merit: 0
|
|
November 20, 2017, 10:37:11 AM |
|
Without reading this all 74 pages and based on the "enter your BTC address" - the miner trades whatever you just mined to BTC automatically? This could be added to the first post, so lazy-asses like me can spot it from there |
|
|
|
|
|
BitBustah
|
|
November 20, 2017, 10:38:29 AM |
|
the miner trades whatever you just mined to BTC automatically?
No, the selected pool does that. Nemo is only switching between algos/pools. |
|
|
|
|
|
dragonmike
|
|
November 20, 2017, 11:42:25 AM |
|
added: Polytimos support
How can the algo-switcher select Polytimos if there's no market value for the coin (yet)? Or have you only added it pro-forma, and not to the profitability calculator? |
|
|
|
|
|
fynxgloire
|
|
November 22, 2017, 12:36:59 AM |
|
Hi,
I am using your Neosminer on miningpoolhub and I found something peculiar.
When I run the script below for Skien algorithm:
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.2.ps1 -SelGPUEWBF '0 1 2 3 4 5 6 7' -SelGPUCC '0,1,2,3,4,5,6,7' -Currency USD -Passwordcurrency BTC -interval 120 -Username fynxgloire.Mining1070 miningpoolhub -Location US -PoolName miningpoolhub -Type nvidia -Algorithm skein -Donate 5
I DO NOT see any statistics on the top of the screen ( like how much are the earnings per day etc. )
I already created a worker manually called: Mining1070 on miningpoolhub.
I then logged into miningpoolhub and for some reason ANOTHER worker was added with this name:
Mining1070.ID=NemosMiner-v2.2
May I ask why is this new worker added on the website settings for this algorithm Digibyte-Skein Pool?
Should I delete this newly added worker from miningpoolhub?
Is this in any way affecting why I cannot see earnings per day running this script?
|
|
|
|
|
|
