[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[airwalker_]

I am assuming you are new to this. The estimated value you are seeing is actually quite correct. That is : if the pool luck, the miners on the pool hashrate on said algo, BTC values, and the value of the coin on various exchanges remain exactly the same for 24 hours.

Yeah - that doesn't happen.

You will see major fluctuations based on those variables.

[MKLord]

i have 3rd rig when benchmark my rig crash and auto restart
my 1st and second rig ok no problems

[Zikkson]

Is there any proper way to update to new versions without but file settings edit? I know its not possile for 2.3 to 2.4 becase of new features, but between minor versions?

[YYYSSS]

"-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 3%)"
What does mean this?

[Zikkson]

Its % of difference in profit needed for alfo switch. On this settings depends how often your miners will change. Lower value = more changes

Anyway i have a problem with ahashpool24h. Yesterday i ended on whole day nist5 mining without change, and at afternoon it lasts 2 hours to get payment share. So i changed to non24h version and now it changes too often. I have to play with gainpct value a guess and use non24h version

[citrus333]

Hey guys, been using my 970 to mine using nemos miner no problems.  Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm.  Any solutions to this?  Crashes regardless of overclock, underclock, or stock settings.

[jimmykl]

Hey guys, been using my 970 to mine using nemos miner no problems.  Recently picked up a gtx 1080 and the display driver crashes whenever Nemos switches to a different algorithm.  Any solutions to this?  Crashes regardless of overclock, underclock, or stock settings.

Try uninstalling any OC apps, doing a DDU then installing the latest nvidia drivers

[Boffinboy24]

I'm working on a side by side with 2x1070 on each pool right now.  I tried to start it on Thursday and was hoping to have results today but something went to crap over the weekend so I had to restart it yesterday.  So far 10 hours in ahashpool is only 2% higher than hash refinery.

How is the test going of HR? As a small miner ahashpool payout would take a long time to payout but hashrefinery at least would be each week.

BTC payouts are also bad for me due to % paid on fees. I wonder whether the cost of that is less than the lower rate I get using zpool in LTC. Alternatively I guess I could mine direct to exchange and then change and withdraw in LTC. Anyone doing this?

[primo1983]

Type: NVIDIA

Miner                Algorithm           Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----                ---------           ----- -------- ------- ------- ---------- ----
ccminerAlexis78      Blake2s        17,28 GH/s    4,129 0,00413  48,310    0,00024 ahashpool-
CcminerTpruvot       Skunk         127,99 MH/s    2,519 0,00252  29,470    0,01968 ahashpool


There is something very wrong with this miner, since it always shows from 32 to 42 US $ day, but in fact what comes in is less than 20 US $ because it gets so low as it actually says there? I think there could be a difference but not so much. Please can anyone tell me why? 

nothing is wrong at all with this miner...

that is because your using startahashpool.bat (uses current estimate and 24hr estimate API too request profit) ...

try the startahashpool24hr.bat (uses last 24hour Actual API too request profit) i made it for this exact reason i did not like the estimates that MuiltipoolMiner,Sniifdog etc use

P.S v2.4.1 is being tested at the moment has been through 6x10603gb rig is currently running/testing on the 6x1080ti rig if all goes well it will be released 2nite...

v2.4.1
update: ccminerAlexis78
faster hashrate for: lyra2v2,skein,blake2s,keccak,lbry,nist,phi,veltor

Best Regards
Nemo

OK, but the estimates could not be half that, since as I said the estimates are always between $ 32 to $ 42, I think at least I should give $ 25 to $ 27 do you agree? But it's giving 20 and sometimes less.

I am new to mining, but I am a developer, so I know there can be no such thing as disbelief.
Thanks for the answers

[primo1983]

Version 2.4.1 remove -Algorithm veltor because it will give an error in the benchmarking

Version 2.4.1 when it arrives at poly benchmarking it does not give error but hangs, does not leave the poly to revise this

[lasttimei]

Not sure why for zpool i keep getting Error contacting pool,retrying.
i've tried different Locations .  Nothing is working .

[miner14]

you can change currency to your local currency....

Best Regards
Nemo

Thanks Nemo,
Yes currency sorted, was worried that using US for location would have repercussions for server pings etc,
but it's working fine so I'll leave it alone.

Looking forward to v2.4.1 

[YYYSSS]

Its % of difference in profit needed for alfo switch. On this settings depends how often your miners will change. Lower value = more changes

Anyway i have a problem with ahashpool24h. Yesterday i ended on whole day nist5 mining without change, and at afternoon it lasts 2 hours to get payment share. So i changed to non24h version and now it changes too often. I have to play with gainpct value a guess and use non24h version

Thanks!!I'm understand. maybe.

[minestro]

Not sure why for zpool i keep getting Error contacting pool,retrying.
i've tried different Locations .  Nothing is working .

The only location working for zPool is US.

[smalltimeminer]

Could someone explain to me the difference between intensity and difficulty levels in the miners? I ask because i am trying to dial in my GPU's for the most profit/watt and when i was running skein 24/7 2 weeks ago i managed to dial it in at 6.2Mh/s per watt compared to 2.1Mh/s on OEM settings.. so literally 3x's the efficiency fine tuning it.. but after reading more into nemo's multi-algo when skein took a huge drop in profit last week and i very quickly found that the gpu settings for my stable skein mining was like 80% chance of crashing on other coins, so i have been fighting with them to fine a happy medium as i introduce more coins to the list to mine.. im out to 5 so far stable but i feel like this should be easier... for example i have lyra2v2 set to the lowest intensity setting 8 for ccmineralexa78 and if the difficulty number doesnt climb as high during mining the coin will mine all day 24/7, but when it jumps pass a certain point in difficulty the miner just goes into a GPU Miner error state and crashes...

So i am trying to understand more about the intensity vs difficulty levels as im a new miner still learning...

A tip for the multi-gpu miners, i found that running separate batch files for each card is WAY more stable that trying to group the settings together.. for example my center GPU's in my rig are able to mine skein at intensity of 27 only, but my outer colder ones can do as high as 30 intensity without ever crashing... so right now my setup is at its most stable condition running multiple Nemo-Miners in the background all running separate GPU's on different settings...  it does confuse me when some will mine 1 coin and others mine another coin at the same exact moment... not exactly sure how the whole grabbing which one is most profitable thing works when im literally using the same computer mining these different batch files...

This gives me an idea to expand and have it apply nvidia profiles per algo....  This is an interesting task.   would take a bit of end-user work to trim for their own systems when it comes down to it... but I believe I can add the functionality to change your OC settings automatically with the algo change.  And I think I can do it dynamically based on what algo is mining....  (I think I can see the code in my head at this point)

"intensity vs. difficulty" is surely not a thing.   intensity is how many concurrent hashing threads your GPU is running;  difficulty is the value of the result the GPU provides.....

Hi Jared,
I was wondering if you were ever able to get the overclock settings to switch depending on the algo? I have had the same thought recently and came across your post.
Thanks

[miner14]

I wouldn't mind hearing a little more about this, 

i managed to dial it in at 6.2Mh/s per watt compared to 2.1Mh/s on OEM settings

[millsys]

Substantial performance improvement on X17, Nist5, Skein, C11, Lyra2REv2!!!  30-40% across the board!!!

PHI = none, in the 2.4.1 beta you had a new phi 1.0 miner, I tested and it actually didn't improve results at all, I guess you noticed the same and left it out for now?

[lasttimei]

Not sure why for zpool i keep getting Error contacting pool,retrying.
i've tried different Locations .  Nothing is working .

The only location working for zPool is US.

Yea i did US on , NemosMiner-v2.4.1 file & on pool file, not sure what i'm doing wrong.

[millsys]

Not sure why for zpool i keep getting Error contacting pool,retrying.
i've tried different Locations .  Nothing is working .

The only location working for zPool is US.

Yea i did US on , NemosMiner-v2.4.1 file & on pool file, not sure what i'm doing wrong.

You are using the lower paying pool, just use ahashpool and make more

[lasttimei]

Not sure why for zpool i keep getting Error contacting pool,retrying.
i've tried different Locations .  Nothing is working .

The only location working for zPool is US.

Yea i did US on , NemosMiner-v2.4.1 file & on pool file, not sure what i'm doing wrong.

You are using the lower paying pool, just use ahashpool and make more

Do they accept payout in other currency? Don't really want BTC.

Zpool is working for now.
Zpool24hr gives me the error.