[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[vitlab]

Nemo, could you change the script so that it doesn't try to load pool stats forever in case the pool fails to return them? Just use the existing stats instead. See below for the issue:

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

This currently prevents the script from changing algo. It also spams api.coinbase.com even though there's no need for that.

started to work "A Hash Pool". the problem disappeared. Nemo he is not guilty of this

[Chromexnet]

Nemo, could you change the script so that it doesn't try to load pool stats forever in case the pool fails to return them? Just use the existing stats instead. See below for the issue:

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

This currently prevents the script from changing algo. It also spams api.coinbase.com even though there's no need for that.

started to work "A Hash Pool". the problem disappeared. Nemo he is not guilty of this

The pool is mining just fine but the stats API is down. Currently Nemo's script doesn't handle that situation well and ends up in a limbo where it tries to load the stats forever. It really doesn't need to do that. I was suggesting the script could reuse the existing stats and try again next time.

I just tested that this same issue also prevents the script from starting if the stats API is down. So it's not mining anything, it just sits there and tries to reconnect.

[carlcapone]

Nemo, could you change the script so that it doesn't try to load pool stats forever in case the pool fails to return them? Just use the existing stats instead. See below for the issue:

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

This currently prevents the script from changing algo. It also spams api.coinbase.com even though there's no need for that.

started to work "A Hash Pool". the problem disappeared. Nemo he is not guilty of this

The pool is mining just fine but the stats API is down. Currently Nemo's script doesn't handle that situation well and ends up in a limbo where it tries to load the stats forever. It really doesn't need to do that. I was suggesting the script could reuse the existing stats and try again next time.

I just tested that this same issue also prevents the script from starting if the stats API is down. So it's not mining anything, it just sits there and tries to reconnect.

Agreed. I have noticed it when it started doing that so I had to check my rig from time to time remotely so I can manually restart it. Not sure which version it started and I tried to copy off some settings from sniffdog and from mpm but was unsuccessful since my experience with scripting is not enough. If anyone can help or with Nemos with it that would be great.

[Bit2017User]

Can anyone recommend from the original algorithms 

xevan,hsr,phi,tribus,c11,lbry,skein,timetravel,sib,bitcore,x17,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s,skunk

the best ones for Nvidia 1050TI

I had to remove blake2s because it was to heavy for the card  and xevan because it was just not running.

Thanks for help

[TeamCyr]

NemosMiner-v2.3c-beta  

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash

tested with 6x 1060 3gb & 6x 1080ti rigs

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners

https://github.com/nemosminer/NemosMiner-v2.3/releases/download/NemosMiner-v2.3c-beta/NemosMiner-v2.3c-beta.zip

edit: start.bat

1.change BTC address to yours

2.select how many gpu's you have eg: (1gpu dstm 0 cc 0) (default 2 gpu dstm 0 1 cc 0,1) (6gpu dstm 0 1 2 3 4 5 cc 0,1,2,3,4,5)

3.remove any algos you do not want to mine (default all supported algos enabled)

4.there is a default 5minute per day fee, that can be disabled by changing -Donate 5 to 0

5.run start.bat

note. instruction number 1 : is different for miningpoolhub, you need to change user name and worker name

If you have Windows 7, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

requires nvidia driver newer than 384

this is a free project feel free to donate be much appreciated:

aaronsace = 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

_______________________________________________________________________________ _____________________________________________________________________________

NemosMiner-v1.7.6-Zpool

https://github.com/nemosminer/NemosMiner-v1.7.6-Zpool/releases/download/NemosMinerv1.7.6/NemosMiner-v1.7.6-ZPOOL.zip

NemosMiner-v1.7.6-Zpool multi algo profit switching NVIDIA miner for Zpool (can select which GPU's you want to run)
_______________________________________________________________________________ _____________________________________________________________________________

NemosMiner-v1.7.3-MPH

https://github.com/nemosminer/NemosMiner-v1.7.3-MPH/releases/download/NemosMiner-v1.7.3-MPH/NemosMiner-v1.7.3-MPH.zip

NemosMiner-v1.7.3-MPH multi algo profit switching NVIDIA miner for Mining Pool Hub (can select which GPU's you want to run)
_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

[borimol]

I have a problem with a worker that never shows up (only happens with NemosMiner).

I have three different workers, two of them show up fine on my miningpoolhubstats.com page (using Awesome miner). The last one is never listed no matter what I do (with NemosMiner). Also doesn't show up on MPH workers list for any coin.

Worker is running NemosMiner-v2.3

https://s6.postimg.org/crf4svqr5/miner.jpg

https://s6.postimg.org/6dq1pn1ap/mph.jpg

[Bit2017User]

_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

It depends on the POOL that you want to work with.
Which one did you chose?
I chose  https://ahashpool.com

[TeamCyr]

_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

It depends on the POOL that you want to work with.
Which one did you chose?
I chose  https://ahashpool.com

I just went to ahashpool there is no sign up. Do I just copy  and past the stratum code?

Very confusing.

[Bit2017User]

I have a problem with a worker that never shows up (only happens with NemosMiner).

I have three different workers, two of them show up fine on my miningpoolhubstats.com page (using Awesome miner). The last one is never listed no matter what I do (with NemosMiner). Also doesn't show up on MPH workers list for any coin.

Worker is running NemosMiner-v2.3

Just create a new worker and leave with account default job then use the credentials here instead of XXXX

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency BTC -interval 120 -Username XXXX -Workername XXXX -Location europe -PoolName miningpoolhub -Type nvidia -Algorithm cryptonight,keccak,lyra2z,skein,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt -Donate 5

this will work for 1 GPU for 2 you need to change SelGPUDSTM '0 1' -SelGPUCC '0,1'

[Bit2017User]

_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

It depends on the POOL that you want to work with.
Which one did you chose?
I chose  https://ahashpool.com

I just went to ahashpool there is no sign up. Do I just copy  and past the stratum code?

Very confusing.

Very easy my friend just replace the wallet with your own bitcoin address and worker name with something else if you have more than 1 pc
and start mining

Wallet XXXX -Location US -PoolName ahashpool -WorkerName ID=XXXX

[borimol]

I have a problem with a worker that never shows up (only happens with NemosMiner).

I have three different workers, two of them show up fine on my miningpoolhubstats.com page (using Awesome miner). The last one is never listed no matter what I do (with NemosMiner). Also doesn't show up on MPH workers list for any coin.

Worker is running NemosMiner-v2.3

https://s6.postimg.org/crf4svqr5/miner.jpg

https://s6.postimg.org/6dq1pn1ap/mph.jpg

Just create a new worker and leave with account default job then use the credentials here instead of XXXX

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency BTC -interval 120 -Username XXXX -Workername XXXX -Location europe -PoolName miningpoolhub -Type nvidia -Algorithm cryptonight,keccak,lyra2z,skein,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt -Donate 5

this will work for 1 GPU for 2 you need to change SelGPUDSTM '0 1' -SelGPUCC '0,1'

Still no working:

https://s6.postimg.org/6dq1pu3xd/image.jpg

[Bit2017User]

I have a problem with a worker that never shows up (only happens with NemosMiner).

I have three different workers, two of them show up fine on my miningpoolhubstats.com page (using Awesome miner). The last one is never listed no matter what I do (with NemosMiner). Also doesn't show up on MPH workers list for any coin.

Worker is running NemosMiner-v2.3

Just create a new worker and leave with account default job then use the credentials here instead of XXXX

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency USD -Passwordcurrency BTC -interval 120 -Username XXXX -Workername XXXX -Location europe -PoolName miningpoolhub -Type nvidia -Algorithm cryptonight,keccak,lyra2z,skein,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt -Donate 5

this will work for 1 GPU for 2 you need to change SelGPUDSTM '0 1' -SelGPUCC '0,1'

Still no working:

Did you check Myriadcoin's? just let it run for a wile and see if on Balances you see new coins.

[papabiz]

How do u guys deal with the powerlimit when using multi-algo miners?
 
You use 80% as a sweetspot or have an OC script for depending on which algo is running=?

[Bit2017User]

Why do so few algorithms load when I run startminingpoolhub as compared to startzpool? There are nearly three times as many algorithms running when I mine to zpool as when I mine to miningpoolhub.

I don't know but why use it? most of the coins have a 2% fee!
and the balance needs to be higher to get paid.

[TeamCyr]

_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

It depends on the POOL that you want to work with.
Which one did you chose?
I chose  https://ahashpool.com

I just went to ahashpool there is no sign up. Do I just copy  and past the stratum code?

Very confusing.

Very easy my friend just replace the wallet with your own bitcoin address and worker name with something else if you have more than 1 pc
and start mining

Wallet XXXX -Location US -PoolName ahashpool -WorkerName ID=XXXX

actually it is incredibly difficult for me.

what do I do with this? -SelGPUDSTM '0 1' -SelGPUCC '0,1'

I have 7 cards, is this correct? -SelGPUDSTM '0 1 2 3 4 5 6' -SelGPUCC '0,1,2,3,4,5,6'

[Bit2017User]

_______________________________________________________________________________ _____________________________________________________________________________

Hello!

Newbie stuck at STEP zero of your instructions.

There is NO START.BAT file to edit. There are 7 batch files with the word START in them. Which one?

It depends on the POOL that you want to work with.
Which one did you chose?
I chose  https://ahashpool.com

I just went to ahashpool there is no sign up. Do I just copy  and past the stratum code?

Very confusing.

Very easy my friend just replace the wallet with your own bitcoin address and worker name with something else if you have more than 1 pc
and start mining

Wallet XXXX -Location US -PoolName ahashpool -WorkerName ID=XXXX

actually it is incredibly difficult for me.

what do I do with this? -SelGPUDSTM '0 1' -SelGPUCC '0,1'

I have 7 cards, is this correct? -SelGPUDSTM '0 1 2 3 4 5 6' -SelGPUCC '0,1,2,3,4,5,6'

Just try it and tell us.
Enjoy your rig. What cards you have?

[millsys]

actually it is incredibly difficult for me.

what do I do with this? -SelGPUDSTM '0 1' -SelGPUCC '0,1'

I have 7 cards, is this correct? -SelGPUDSTM '0 1 2 3 4 5 6' -SelGPUCC '0,1,2,3,4,5,6'

Thats correct for 7 cards

Be sure to set
-Wallet xxxxxxxxx

Then visit ahashpool.com and click on Wallet and paste in your wallet to watch the results.  No need to register.  It will pay your wallet after you hit .008

[deformalde]

Any idea why balance stop movin approx 4-6hs with ahashpool when my rig is still actif and mining ?

[millsys]

Any idea why balance stop movin approx 4-6hs with ahashpool when my rig is still actif and mining ?

RELOAD browser page
Check bottom left of page to make sure it shows your miner as connected
Sometimes there is a 30+ minute delay, as long as its mining you are fine, the front end web will catch up
Total Earned doesn't update every second/minute...

[vitlab]

Help in promoting stalled transactions BTC.
For reward.
My BTC: 1MbWiKvsBuCvMBTMRSHeeFZTtTUQXTDeza