[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[millsys]

-Donate 5 (in batch file)
Using NPlusMiner-v1.3


      Speed Exited   Active   Cnt  Command
      ----- ------   ------   ---  -------
 62.26 MH/s 00:11:50 00:00:10 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a x17 -o stratum+tcp://x17.mine.ahashpool.com:3737 -u
                                   1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH -p NPlusMiner-v1.3,c=BTC -i 20  -d 0,1,2,3,4,5

This shows it was active for 10 minutes ONCE


Started Last Refresh: 02/20/2018 20:17:14
Started Regular Miner: 02/20/2018 20:23:37


So looks like it ran it for 6 minutes, just very confusing why it displays 10.  I'm not splitting hairs here, just bringing it to your attention

[Lukras]

-Donate 5 (in batch file)
Using NPlusMiner-v1.3


      Speed Exited   Active   Cnt  Command
      ----- ------   ------   ---  -------
 62.26 MH/s 00:11:50 00:00:10 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a x17 -o stratum+tcp://x17.mine.ahashpool.com:3737 -u
                                   1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH -p NPlusMiner-v1.3,c=BTC -i 20  -d 0,1,2,3,4,5

This shows it was active for 10 minutes ONCE


Started Last Refresh: 02/20/2018 20:17:14
Started Regular Miner: 02/20/2018 20:23:37


So looks like it ran it for 6 minutes, just very confusing why it displays 10.  I'm not splitting hairs here, just bringing it to your attention

analogous situation

[MrPlus]

-Donate 5 (in batch file)
Using NPlusMiner-v1.3


      Speed Exited   Active   Cnt  Command
      ----- ------   ------   ---  -------
 62.26 MH/s 00:11:50 00:00:10 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a x17 -o stratum+tcp://x17.mine.ahashpool.com:3737 -u
                                   1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH -p NPlusMiner-v1.3,c=BTC -i 20  -d 0,1,2,3,4,5

This shows it was active for 10 minutes ONCE


Started Last Refresh: 02/20/2018 20:17:14
Started Regular Miner: 02/20/2018 20:23:37


So looks like it ran it for 6 minutes, just very confusing why it displays 10.  I'm not splitting hairs here, just bringing it to your attention

Could you post the corresponding entries in Logs\switching.log ?

[BitBustah]

I'm so dissapointed with the new Nemos... The trustlevel and averages etc are OK, but I just really miss the "estimates list".. That's why I used Nemos in the first place.

Now my Nemos is just mining, without an indication on how much the current algo is "worth". This is the worst Nemos version ever for me. 

maybe you should READ the READ ME, it explains how to change it back if your want the old view, apparently your not the majority, so it was switched, also in the case of larger rig farms... the minimal list actually saves on watt drain, because cpu usage goes way up with full list view vs the lite view... every cent counts, also if your rigs are running a lot of GPU's, lite view will reduce the load on the cpu so you dont run into cpu errors... if your running lower level cpu's like celerons and such

in your pool.bat file, add

Code:

-UIStyle Full

"-UIStyle Full" does the trick. thanks for that!

[primo1983]

Why the NemosMiner when -UIStyle Full it stops updating? Just stop updating
https://prnt.sc/iiemcb

[snesterkov]

I have the same problem. It stops updating statistics and when using *plus pools the table never refreshing and always working one algorithm. This is example after working 6,5 hours. Donate was 14 minutes?

Idle:  1

     Speed Exited   Active   Cnt  Command
     ----- ------   ------   ---  -------
51,24 MH/s 00:04:34 00:00:14 Once Bin\NVIDIA-Alexis78Phi\ccminer.exe -a phi -o stratum+tcp://phi.mine.zpool.ca:8333 -u 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE -p NPlusMiner-v1.3,c=BTC -d 0,1,2 --api-remote


      1BTC =  554766,37 RUB
+++++ 1HBpJ3ddUWYDeeib35WFC5Ga2CdzMhXe43  zpoolplus Balance= 0,00185070 74%
Trust Level                      42% [ 00 days 02:30 ]
Average BTC/H                    BTC = 0,00001063 | mBTC = 0,011
Average BTC/D                    BTC = 0,00025508 | mBTC = 0,255
Estimated Pay Date               25.02.2018 7:25:25 > 0,0025 BTC
+++++


   Type: NVIDIA

Miner                Algorithm        Speed mBTC/Day BTC/Day RUB/Day BTC/GH/Day Pool
-----                ---------        ----- -------- ------- ------- ---------- ----
CcminerAlexis78Phi   Phi         53,78 MH/s    1,109 0,00111 615,424    0,02063 zpoolplus-
ccminerpolytimos     Lyra2RE2   113,71 MH/s    0,866 0,00087 480,350    0,00761 zpoolplus-
CcminerKlaust        NeoScrypt    3,47 MH/s    0,841 0,00084 466,709    0,24238 zpoolplus-
ccminerAlexis78      Sib         47,22 MH/s    0,765 0,00076 424,330    0,01620 zpoolplus-
CcminerAlexis78cuda9 Xevan       10,06 MH/s    0,720 0,00072 399,331    0,07157 zpoolplus-
CcminerTpruvotcuda9  Tribus     161,30 MH/s    0,686 0,00069 380,599    0,00425 zpoolplus-
CcminerTpruvot       Bitcore     45,36 MH/s    0,676 0,00068 375,062    0,01491 zpoolplus-
ccminerpolytimos     Blake2s     11,10 GH/s    0,656 0,00066 363,929    0,00006 zpoolplus-
DSTM                 Equihash     1,35 KH/s    0,605 0,00060 335,569  449,56385 zpoolplus-
ccminerpolytimos     Skein        1,48 GH/s    0,508 0,00051 281,565    0,00034 zpoolplus-
ccminerpolytimos     X17         10,44 MH/s    0,498 0,00050 276,439    0,04775 zpoolplus-
ccminerpolytimos     Poly        56,60 MH/s    0,464 0,00046 257,238    0,00819 zpoolplus-
ccminerpolytimos     C11         48,79 MH/s    0,333 0,00033 184,903    0,00683 zpoolplus-
CcminerTpruvotcuda9  Timetravel  74,78 MH/s    0,160 0,00016  89,031    0,00215 zpoolplus-
CcminerTpruvot       Skunk       82,13 MH/s    0,150 0,00015  83,050    0,00182 zpoolplus-
ccminerpolytimos     Nist5      139,02 MH/s    0,035 0,00004  19,652    0,00025 zpoolplus-


Running:

     Speed Started  Active   Cnt Command
     ----- -------  ------   --- -------
53,78 MH/s 00:04:34 00:06:25 2   Bin\NVIDIA-Alexis78Phi\ccminer.exe -a phi -o stratum+tcp://phi.mine.zpool.ca:8333 -u 1HBpJ3ddUWYDeeib35WFC5Ga2CdzMhXe43 -p ID=rig1,c=BTC -d 0,1,2 --api-remote


--------------------------------------------------------------------------------
Last Refresh: 02/22/2018 21:27:01
Sleep 180 sec

After deleting BrainPlus/zpoolplus/zpoolplus.json table was updated, but was some errors before update.

[ruplikminer]

I get an error when I launch the program

http://prntscr.com/iig0jg

I will transalte because it's in Italian. When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

and then all the rest...

I tried the program on 2 different computers. On both I have the same error.

how can I fix it?

[SergADM]

I get an error when I launch the program

http://prntscr.com/iig0jg

I will transalte because it's in Italian. When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

and then all the rest...

I tried the program on 2 different computers. On both I have the same error.

how can I fix it?

I also have this problem
y мeня тoжe тaкaя пpoблeммa

[Storx]

is there some way to fix phi, i have disabled it currently and the miner seems to mining fine, its mining to MY wallet... but i came home from work to half my rigs spending hours on someone elses wallet..... with a huge loss of profits.....

     Speed Exited   Active   Cnt  Command
     ----- ------   ------   ---  -------
385.50 MH/s 00:00:38 00:05:14 Once Bin\NVIDIA-Alexis78Phi\ccminer.exe -a phi -o stratum+tcp://phi.mine.zpool.ca:8333 -u 134bw4oTorEJUUVFhokDQDfNqTs7rBMNYy -p NPlusMiner-v1.3,c=BTC -d 0,1,2,3,4,5,6,7,8,9,10,11 --api-remote

[ruplikminer]

I get an error when I launch the program

http://prntscr.com/iig0jg

I will transalte because it's in Italian. When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

and then all the rest...

I tried the program on 2 different computers. On both I have the same error.

how can I fix it?

I also have this problem
y мeня тoжe тaкaя пpoблeммa

Since when? Yesterday for me was working fine...for you?

[fireanimal]

I haven't had that issue, but these plus pools are a real headache.... Just tested zergpoolplus and same issues with profits not updating.  I've switched back to the regular non 24hr version, and so far no issues updating.

[millsys]

I haven't had that issue, but these plus pools are a real headache.... Just tested zergpoolplus and same issues with profits not updating.  I've switched back to the regular non 24hr version, and so far no issues updating.

ZERO issues with ahashpoolplus on over 24 rigs for last week!

[Enkrypt]

I get an error when I launch the program

http://prntscr.com/iig0jg

When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

I get same error with NemosMiner 2.5.0 and startahashpoolplus.bat. On first launch it won't download any Miners, just gives "Invoke-WebRequest" errors. Then says "No Miners". What gives?

[millsys]

I get an error when I launch the program

http://prntscr.com/iig0jg

When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

I get same error with NemosMiner 2.5.0 and startahashpoolplus.bat. On first launch it won't download any Miners, just gives "Invoke-WebRequest" errors. Then says "No Miners". What gives?

Have you set your User Access Control to none?  Then just start up batch regularly (no need for run as admin)

[Enkrypt]

I get an error when I launch the program

http://prntscr.com/iig0jg

When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

I get same error with NemosMiner 2.5.0 and startahashpoolplus.bat. On first launch it won't download any Miners, just gives "Invoke-WebRequest" errors. Then says "No Miners". What gives?

Have you set your User Access Control to none?  Then just start up batch regularly (no need for run as admin)

That didn't help. https://imgur.com/a/RBW6E

[SergADM]

I get an error when I launch the program

http://prntscr.com/iig0jg

I will transalte because it's in Italian. When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

and then all the rest...

I tried the program on 2 different computers. On both I have the same error.

how can I fix it?

I also have this problem
y мeня тoжe тaкaя пpoблeммa

Since when? Yesterday for me was working fine...for you?

today does not work does not load programs
ceгoдня нe paбoтaeт нe зaгpyжaeт пpoгpaммы

[millsys]

I get an error when I launch the program

http://prntscr.com/iig0jg

When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

I get same error with NemosMiner 2.5.0 and startahashpoolplus.bat. On first launch it won't download any Miners, just gives "Invoke-WebRequest" errors. Then says "No Miners". What gives?

Have you set your User Access Control to none?  Then just start up batch regularly (no need for run as admin)

That didn't help. https://imgur.com/a/RBW6E

Check that date/time is correct, if wrong it will cause SSL to fail

[jdubya]

I have a rig with 11 cards.  If I list card -d 10, CCMiner recognizes the card as card 0 and ignores the 1 in 10.  So when I am benchmarking, CCMiner uses card 0 twice causing many algos to crash CCminer.  I tried removing the -d list of cards in the startpool.bat file, but then it defaults to 2 cards for benchmarking and mining.  What file can I change to remove the -d card list so the miners just default to all cards?

Any help would be appreciated.  Thanks in advance.

Some of the miners don't support card #11 (10) and think its card #1 (0)
Run NemosMiner on first 8 cards is best (0-7) then have separate batch running against blaze2s, phi, or x17 continuously for other cards using TPruvotcuda9/ccminer 2.2.4 which DOES support -d 8,9,10,11

Thanks!
If I did that would have to have 2 instances of Nemos running?

no you wouldn't
run 24hr script, take note of most profitable miner for your rig
you would then craft a batch file that runs ccminer 2.2.4 for that algo for the extra video cards.
first 8 cards would run nemos, other 4 would run the most profitable from last 24 hours


example batch file: C:\nemosminer-v2.4-master\Bin\NVIDIA-TPruvotcuda9\ccminer.exe -d 8,9,10,11 -a phi -o stratum+tcp://phi.mine.ahashpool.com:8333 -u 1FTyourwallet -p ID=MINER1B,c=BTC

Are you saying I will have to run cards 0-7 in nemos, and any above that in ccminer stand alone and manually switch the algos depending upon profitability?  I really appreciate the help....but I'm confused....The way HSR is set up to run neoscrypt is also screwed up....it also considers GPU 10 a 0.

Thanks.

[millsys]

I have a rig with 11 cards.  If I list card -d 10, CCMiner recognizes the card as card 0 and ignores the 1 in 10.  So when I am benchmarking, CCMiner uses card 0 twice causing many algos to crash CCminer.  I tried removing the -d list of cards in the startpool.bat file, but then it defaults to 2 cards for benchmarking and mining.  What file can I change to remove the -d card list so the miners just default to all cards?

Any help would be appreciated.  Thanks in advance.

Some of the miners don't support card #11 (10) and think its card #1 (0)
Run NemosMiner on first 8 cards is best (0-7) then have separate batch running against blaze2s, phi, or x17 continuously for other cards using TPruvotcuda9/ccminer 2.2.4 which DOES support -d 8,9,10,11

Thanks!
If I did that would have to have 2 instances of Nemos running?

no you wouldn't
run 24hr script, take note of most profitable miner for your rig
you would then craft a batch file that runs ccminer 2.2.4 for that algo for the extra video cards.
first 8 cards would run nemos, other 4 would run the most profitable from last 24 hours


example batch file: C:\nemosminer-v2.4-master\Bin\NVIDIA-TPruvotcuda9\ccminer.exe -d 8,9,10,11 -a phi -o stratum+tcp://phi.mine.ahashpool.com:8333 -u 1FTyourwallet -p ID=MINER1B,c=BTC

Are you saying I will have to run cards 0-7 in nemos, and any above that in ccminer stand alone and manually switch the algos depending upon profitability?  I really appreciate the help....but I'm confused....The way HSR is set up to run neoscrypt is also screwed up....it also considers GPU 10 a 0.

Thanks.

0-9 (10 cards) on Nemosminer
10 (card 11) on most profitable algorithm which is x17 for now

[Enkrypt]

I get an error when I launch the program

http://prntscr.com/iig0jg

When it tries to download the miners the error is: Invoke-WebRequest : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel

I get same error with NemosMiner 2.5.0 and startahashpoolplus.bat. On first launch it won't download any Miners, just gives "Invoke-WebRequest" errors. Then says "No Miners". What gives?

Have you set your User Access Control to none?  Then just start up batch regularly (no need for run as admin)

That didn't help. https://imgur.com/a/RBW6E

Check that date/time is correct, if wrong it will cause SSL to fail

My OS system Date/Time? It's set to 'Set Time Automatically' in Windows 10