[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[lmaorofl]

@nemo

Which files/folders I shouldn't replace with the old one if I update to the new version?

[vitlab]

@nemo
due to changes in payment terms on ahashpool (https://www.ahashpool.com), What changes must be made to the file "NemosMinerv2.5.1.ps1" to display the payment date for 0.005 BTC?
"....Payouts are made automatically every 24 hours for all balances above 0.01 BTC. We will occassionally payout balances above 0.005 approximately every ~10 days at our discretion conditional on that the network is not congested."

[GinaMinehart]

failing with 7 x 1070gtx's

   Type: NVIDIA

Miner               Algorithm            Speed     mBTC/Day      BTC/Day      USD/Day BTC/GH/Day Pool
-----               ---------            -----     --------      -------      ------- ---------- ----
EthashClaymore      Ethash         194.38 MH/s        1.433      0.00143       13.980    0.00737 miningpoolhub-Ethereum
DSTM                Equihash         2.87 KH/s        1.376      0.00138       13.426  480.31463 miningpoolhub-Zencash
CcminerTpruvotx64   Lyra2z           9.70 MH/s        1.038      0.00104       10.131    0.10704 miningpoolhub-Zcoin
ccminerpolytimos    Skein            3.21 GH/s        0.880      0.00088        8.588    0.00027 miningpoolhub-Myriadcoin...
CcminerTpruvotcuda9 Groestl        207.16 MH/s        0.510      0.00051        4.972    0.00246 miningpoolhub-Groestlcoin
XMRig               CryptoNight      4.17 KH/s        0.449      0.00045        4.380  107.58232 miningpoolhub-Monero
HSRminer            NeoScrypt     Benchmarking Benchmarking Benchmarking Benchmarking    0.14432 miningpoolhub-Feathercoin
ccminerAlexis78     MyriadGroestl Benchmarking Benchmarking Benchmarking Benchmarking    0.00021 miningpoolhub-DigibyteGr...
ccminerpolytimos    Lyra2RE2      Benchmarking Benchmarking Benchmarking Benchmarking    0.00466 miningpoolhub-Vertcoin
ccminerpolytimos    Keccak        Benchmarking Benchmarking Benchmarking Benchmarking    0.00010 miningpoolhub-Maxcoin


Running:
Failed:  1

    Speed Exited   Active   Cnt  Command
    ----- ------   ------   ---  -------
0.00 PH/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o
                                 stratum+tcp://hub.miningpoolhub.com:17018 -u GinaMinehart.Dragline -p x -d 0,1,2,3,4,5,6


--------------------------------------------------------------------------------
Last Refresh: 02/26/2018 22:51:04
Sleep 180 sec

[Kilomans]

I hope someday someone will make a guide how to use YiiimpLogger with free hosting. Tried today on 000webhost (have sql and cron listed in futures) but nothing succeeded. Maybe someone have step-by-step guide?

[BitBustah]

I hope someday someone will make a guide how to use YiiimpLogger with free hosting. Tried today on 000webhost (have sql and cron listed in futures) but nothing succeeded. Maybe someone have step-by-step guide?

I could send you the manual again. (It was in the original ZIP package).

OR

If you are willing to give me access to your space/server I'll set it up for you... For a symbolic donation of 0,5 - 1 EUR/USD.

[Storx]

are you monitoring your rigs on nemominer on awesome miner? i ask because i recently switched all my rigs from awesome miner over due to recent bugs that i was dealing with on the latest few updates on awesome miner on profit switching, moved over and all the rigs have been 100% stable since the switch... just wishing i could monitor them since i have 100+ gpu's to monitor

You can use AM to monitor your rigs that are running NM by adding the remote API argument to each of NM's start commands.

Can you elaborate on this, because i was under the impression it was already reporting since it says "--api-remote" on each line mined.

I really like AM, but the stability of Nemo has been way more stable than i have been dealing with on AM for weeks leading up to the switch, just wish there was some sort of reporting/tracking feature of multiple nemominer rigs like multipoolminer... from my understanding is that they are very similar, just small differences, may look into it..., but if i can just setup AM to monitor all my rigs, then i would be perfect

[trucobit]

Hello everyone, I have read all the threads of the post completely using the translator.

I have a problem with the latest version, a problem that is repeated every bit. When I have a nemos running and has already done all the control points of the benmark, everything is fine. But if I close nemos and open it again, I do not see all the algos, only I see something like X17, neoscript or any other doing the control again, but not all other ALGOS appear.

To solve it, I only have two alternatives. Reset all the benmark and do them all again, or edit in the Miners folder, and change that Something from one miner to another, and when launching again NEMOS I appear all done except the one I changed.

This is making me very heavy, I am afraid to close and open again NEMOS, this version is having many problems. How could it be that this weekend I've done 9 times as many points on 3 computers, it's crazy.

[millsys]

failing with 7 x 1070gtx's

   Type: NVIDIA

Miner               Algorithm            Speed     mBTC/Day      BTC/Day      USD/Day BTC/GH/Day Pool
-----               ---------            -----     --------      -------      ------- ---------- ----
EthashClaymore      Ethash         194.38 MH/s        1.433      0.00143       13.980    0.00737 miningpoolhub-Ethereum
DSTM                Equihash         2.87 KH/s        1.376      0.00138       13.426  480.31463 miningpoolhub-Zencash
CcminerTpruvotx64   Lyra2z           9.70 MH/s        1.038      0.00104       10.131    0.10704 miningpoolhub-Zcoin
ccminerpolytimos    Skein            3.21 GH/s        0.880      0.00088        8.588    0.00027 miningpoolhub-Myriadcoin...
CcminerTpruvotcuda9 Groestl        207.16 MH/s        0.510      0.00051        4.972    0.00246 miningpoolhub-Groestlcoin
XMRig               CryptoNight      4.17 KH/s        0.449      0.00045        4.380  107.58232 miningpoolhub-Monero
HSRminer            NeoScrypt     Benchmarking Benchmarking Benchmarking Benchmarking    0.14432 miningpoolhub-Feathercoin
ccminerAlexis78     MyriadGroestl Benchmarking Benchmarking Benchmarking Benchmarking    0.00021 miningpoolhub-DigibyteGr...
ccminerpolytimos    Lyra2RE2      Benchmarking Benchmarking Benchmarking Benchmarking    0.00466 miningpoolhub-Vertcoin
ccminerpolytimos    Keccak        Benchmarking Benchmarking Benchmarking Benchmarking    0.00010 miningpoolhub-Maxcoin


Running:
Failed:  1

    Speed Exited   Active   Cnt  Command
    ----- ------   ------   ---  -------
0.00 PH/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-ccminerpolytimos\ccminer.exe -a lyra2v2 -o
                                 stratum+tcp://hub.miningpoolhub.com:17018 -u GinaMinehart.Dragline -p x -d 0,1,2,3,4,5,6


--------------------------------------------------------------------------------
Last Refresh: 02/26/2018 22:51:04
Sleep 180 sec

Switch to AhashpoolPlus, MiningPoolHub lacks the more profitable X17/Tribus/Xevan/Nist5 that your NVIDIA card is better at hashing.  You are missing out on 20% profit between X17 and etHash right now.

[beinadvance]

   Type: NVIDIA

Miner              Algorithm          Speed     mBTC/Day      BTC/Day      USD/Day BTC/GH/Day Pool
-----              ---------          -----     --------      -------      ------- ---------- ----
DSTM                     Equihash    692,76    H/s        0,318      0,00032        3,238  459,15173 nicehash-
ccminerpolytimos    Lyra2RE2    56,12    MH/s        0,244      0,00024        2,485      0,00435 nicehash-
CcminerSkunk        Skunk         40,66    MH/s        0,222      0,00022        2,260      0,00546 nicehash-
EthashClaymore      Ethash        45,54      H/s        0,000      0,00000        0,000      0,00691 nicehash-

how to fix Ethash H/s on MH/s ?

Speed  61.34 Mh/s    gpu/0 14.37  gpu/1 15.82  gpu/2 15.66  gpu/3 15.50

[DankNetCode]

are you monitoring your rigs on nemominer on awesome miner? i ask because i recently switched all my rigs from awesome miner over due to recent bugs that i was dealing with on the latest few updates on awesome miner on profit switching, moved over and all the rigs have been 100% stable since the switch... just wishing i could monitor them since i have 100+ gpu's to monitor

You can use AM to monitor your rigs that are running NM by adding the remote API argument to each of NM's start commands.

Can you elaborate on this, because i was under the impression it was already reporting since it says "--api-remote" on each line mined.

I really like AM, but the stability of Nemo has been way more stable than i have been dealing with on AM for weeks leading up to the switch, just wish there was some sort of reporting/tracking feature of multiple nemominer rigs like multipoolminer... from my understanding is that they are very similar, just small differences, may look into it..., but if i can just setup AM to monitor all my rigs, then i would be perfect

Tried to PM this to you, but my account is too newb to get it through.  I guess this isn't entirely a hi-jacking since it's somewhat NM related.

Put this into the arguments line of each ps1 miner file you use in the "miners" folder in nemos:

"-b 0.0.0.0:4068" (without the quotes)

I'm not sure why the --api remote argument doesn't work.  I think it might work if you were running AM locally on your mining rig since it defaults to a loopback IP (127.0.0.1).  I'm sure there's a way to get it to work using additional arguemtns, but the above argument worked for me right out of the gate so I just stuck with it.  

Depending on what firewall and OS you're running, the first time each miner runs, you'll likely be prompted to acknowledge the firewall exceptions.  Certainly happens on my W10, Windows defender rig.

Cheers.

J.

[-Lani-]

nemosminer 1.5.1 

Found small error:
Zpool myr-gr uses port 5433 not 5033

 

much appreciated :  ) 

Why I cannot download it?

[minerx117]

Hello everyone, I have read all the threads of the post completely using the translator.

I have a problem with the latest version, a problem that is repeated every bit. When I have a nemos running and has already done all the control points of the benmark, everything is fine. But if I close nemos and open it again, I do not see all the algos, only I see something like X17, neoscript or any other doing the control again, but not all other ALGOS appear.

To solve it, I only have two alternatives. Reset all the benmark and do them all again, or edit in the Miners folder, and change that Something from one miner to another, and when launching again NEMOS I appear all done except the one I changed.

This is making me very heavy, I am afraid to close and open again NEMOS, this version is having many problems. How could it be that this weekend I've done 9 times as many points on 3 computers, it's crazy.

Display Options

  Use -UIStyle Light or -UIStyle Full in start.bat
        Full = Usual display
        Light = Show only currently mining info (Default)
  UIStyle automaticaly swtiches to Full during benchmarking.

In session display toggle

  Press key s in the window to switch between light and full display (will switch display on next refresh)
  Press key e in the window to show/hide earnings (will switch display on next refresh)


Best Regards
Nemo

[minerx117]

are you monitoring your rigs on nemominer on awesome miner? i ask because i recently switched all my rigs from awesome miner over due to recent bugs that i was dealing with on the latest few updates on awesome miner on profit switching, moved over and all the rigs have been 100% stable since the switch... just wishing i could monitor them since i have 100+ gpu's to monitor

You can use AM to monitor your rigs that are running NM by adding the remote API argument to each of NM's start commands.

Can you elaborate on this, because i was under the impression it was already reporting since it says "--api-remote" on each line mined.

I really like AM, but the stability of Nemo has been way more stable than i have been dealing with on AM for weeks leading up to the switch, just wish there was some sort of reporting/tracking feature of multiple nemominer rigs like multipoolminer... from my understanding is that they are very similar, just small differences, may look into it..., but if i can just setup AM to monitor all my rigs, then i would be perfect

Tried to PM this to you, but my account is too newb to get it through.  I guess this isn't entirely a hi-jacking since it's somewhat NM related.

Put this into the arguments line of each ps1 miner file you use in the "miners" folder in nemos:

"-b 0.0.0.0:4068" (without the quotes)

I'm not sure why the --api remote argument doesn't work.  I think it might work if you were running AM locally on your mining rig since it defaults to a loopback IP (127.0.0.1).  I'm sure there's a way to get it to work using additional arguemtns, but the above argument worked for me right out of the gate so I just stuck with it.  

Depending on what firewall and OS you're running, the first time each miner runs, you'll likely be prompted to acknowledge the firewall exceptions.  Certainly happens on my W10, Windows defender rig.

Cheers.

J.

cheers J.  https://github.com/nemosminer/NemosMiner-v2.5.1/issues/329

Regards
Nemo

[DankNetCode]

cheers J.  https://github.com/nemosminer/NemosMiner-v2.5.1/issues/329

Regards
Nemo
[/quote]

Neat!

While I've got your attention, I was wondering if you'd consider disabling the "quickedit" property for the miner CMD window (unless of course you have a reason for it to be on).  I think a lot of the issues you may be hearing about along the lines of "NM not changing algo after interval/sleep time," "benchmark won't stop," and maybe even some "pool stats frozen" are people inadvertently left clicking in the stats window, not realizing it that it's stopping the NM script from doing it's thing.

If not for anything else, consider doing it for people like me who are fumbling with their phones trying to monitor their rigs via Teamviewer and fat fingering the left click by accident.


Cheers,

J

[minerx117]

Cheers,

J

nice : ) will do

[jimmykl]

Hello everyone, I have read all the threads of the post completely using the translator.

I have a problem with the latest version, a problem that is repeated every bit. When I have a nemos running and has already done all the control points of the benmark, everything is fine. But if I close nemos and open it again, I do not see all the algos, only I see something like X17, neoscript or any other doing the control again, but not all other ALGOS appear.

To solve it, I only have two alternatives. Reset all the benmark and do them all again, or edit in the Miners folder, and change that Something from one miner to another, and when launching again NEMOS I appear all done except the one I changed.

This is making me very heavy, I am afraid to close and open again NEMOS, this version is having many problems. How could it be that this weekend I've done 9 times as many points on 3 computers, it's crazy.

Don't reset the benchmarks! It is still checking all the algos but only showing the currently active one. This changed a few versions ago. To show all the algos:

Press S then wait for the next check (however long is set in -interval)

Or to make it permanent add -UIStyle Full to the end of your bat file.

[manc]

Cheers,

J

nice : ) will do

Is it plausible to include a "pause" function? Something where we can stop the mining process, but keep the brain function active? I dislike losing the accrued "trust" level whenever I restart the program. I may stop this program so as to check on a new direct mine coin for a couple of hours or a couple of days, but then this program needs 6 hours to spool the trust level back up.

[trucobit]

I have a big question. I think it can not be done, but it is something that would be good to have it as an option.

The idea is that having several RIGS, although these are different in terms of graphics cards, I would be interested that all rigs mine the same. Now each RIg according to its control points mine what is best for that rig.

But I am interested if I am mining in Zpool, that all my machines go to the same ALGO, so that my participation in the block is greater. I think that it would be much more beneficial if it could be operated that way.

I know it's not possible, but I wanted to leave the idea here.

[minerx117]

Hello everyone, I have read all the threads of the post completely using the translator.

I have a problem with the latest version, a problem that is repeated every bit. When I have a nemos running and has already done all the control points of the benmark, everything is fine. But if I close nemos and open it again, I do not see all the algos, only I see something like X17, neoscript or any other doing the control again, but not all other ALGOS appear.

To solve it, I only have two alternatives. Reset all the benmark and do them all again, or edit in the Miners folder, and change that Something from one miner to another, and when launching again NEMOS I appear all done except the one I changed.

This is making me very heavy, I am afraid to close and open again NEMOS, this version is having many problems. How could it be that this weekend I've done 9 times as many points on 3 computers, it's crazy.

Don't reset the benchmarks! It is still checking all the algos but only showing the currently active one. This changed a few versions ago. To show all the algos:

Press S then wait for the next check (however long is set in -interval)

Or to make it permanent add -UIStyle Full to the end of your bat file.

next release will be back to default "Full"

[trucobit]

it seems that there is a failure in zpoolplus, the Equihash protocol is always among the most profitable by far, but when it makes the tests it calculates badly, it gives a very high value in the panel instead of 0.03 ... it puts 3, ......., gives a false statistic and the truth that just executes Equihash but every time it does it has great gain.

It has already been seen in other screenshots in the yarn that equihash gains are miscalculated and becomes noticeable in Zpool, since other pools do not include it
I mean it almost never executes equihash when it's the most profitable