Tursk
Member
Offline
Activity: 92
Merit: 10
|
|
July 02, 2013, 01:44:00 PM |
|
Nearest us - USB, Power, Power & Power. 3 connection options depending on how you intend to power it. Left side - CAN Bus header connector, and what looks like a cooling fan power connector.
Wow, didnt know that its so featurerich... and all 4! power connectors are for cables that goes horizontal right? The left 3 for sure but im not sure with the right one. But i guess the second right one would be the one to use with a ATX-PSU. The big white connector in the middle is 6-pin PCI-E connector, which is the easiest connection option with ATX-PSU. Green chimney seems to me like simple screw terminal.
|
|
|
|
tarmi
Legendary
Offline
Activity: 1232
Merit: 1011
|
|
July 02, 2013, 02:07:01 PM |
|
Correct me if I'm wrong but Burnin hasn't taken orders yet right?
And you've locked in to ship to Burnin? Arn't you getting ahead of your self? Burnin hasn't officially listed the prices for board yet right?
Or have I missed some critical BitBurner information?
Cheers, QG
What you say is true, but irrelevant to some. I based my decision on quality of workmanship mixed with gut feeligs. indeed. I, for example, bought an airline ticket to Germany to pick the modules by myself from Burnin.
|
|
|
|
krasnolud
|
|
July 02, 2013, 03:15:13 PM |
|
I, for example, bought an airline ticket to Germany to pick the modules by myself from Burnin.
So you already know the date?
|
|
|
|
SebastianJu
Legendary
Offline
Activity: 2674
Merit: 1083
Legendary Escrow Service - Tip Jar in Profile
|
|
July 02, 2013, 03:27:04 PM |
|
Wow, didnt know that its so featurerich... and all 4! power connectors are for cables that goes horizontal right? The left 3 for sure but im not sure with the right one. But i guess the second right one would be the one to use with a ATX-PSU.
Do you mean the green power connector goes with ATX? I wonder how to split power from ATX to multiple boards, like 14? What additional cables/connectors do we need? No, the connector on the left side of the green connector. Im not sure what the green connectors cable would look like. You would most probably split the power from a psu via y-cables. Putting a heat sink on top will restrict the airflow over the pcb. The pcb has internal copper layers ('ground' is usually designed as a plane) which act as heat spreaders as well.
Do you say the other side of the pcb needs airflow too? I intended to force the airflow from the fans through the heatsinks only to maximize cooling. Do i have to rethink this? The chips are designed to release heat out of the bottom, and putting a heatsink on the top of the chips can restrict convection and cause the chips to overheat. The top of the board doesn't need additional air flow AFAIK. The fan on the heatsink should create enough airflow around the board that all you need on top is convection for the other parts. That is, don't cover it up, but no need for anything else. So it doesnt need airflow but then you say the fan will make enough air. But what will happen when i force the airflow ONLY through the heatsink. You know like creating a tunnel. I would like to take 2 miners with heatsink and put them together tight with the heatsinks. Then put a fan on the side and somehow build a tunnel that only allows the air flowing between the ribs of the heatsinks. Im not sure yet what material would be best for this but i think it would greatly effect the cooling because i think otherwise most of the air is going useless the easier way. So would that be possible or is it needed to put a little bit of the airflow to flow above the other sides of the boards.
|
Please ALWAYS contact me through bitcointalk pm before sending someone coins.
|
|
|
tarmi
Legendary
Offline
Activity: 1232
Merit: 1011
|
|
July 02, 2013, 03:33:47 PM |
|
I, for example, bought an airline ticket to Germany to pick the modules by myself from Burnin.
So you already know the date? mid july if avalon delivers on time. if not, well, I guess I will stay in Germany for 2 weeks.
|
|
|
|
FTWbitcoinFTW
|
|
July 02, 2013, 04:14:54 PM |
|
I, for example, bought an airline ticket to Germany to pick the modules by myself from Burnin.
So you already know the date? mid july if avalon delivers on time. if not, well, I guess I will stay in Germany for 2 weeks. i just imagine the same story with BFL With a guy on front of the door for the last 9 month hahaha
|
Lost coins only make everyone else's coins worth slightly more. Think of it as a donation to everyone. it has lots of buttery taste..
|
|
|
bigbeninlondon
|
|
July 02, 2013, 05:52:32 PM |
|
Wow, didnt know that its so featurerich... and all 4! power connectors are for cables that goes horizontal right? The left 3 for sure but im not sure with the right one. But i guess the second right one would be the one to use with a ATX-PSU.
Do you mean the green power connector goes with ATX? I wonder how to split power from ATX to multiple boards, like 14? What additional cables/connectors do we need? No, the connector on the left side of the green connector. Im not sure what the green connectors cable would look like. You would most probably split the power from a psu via y-cables. Putting a heat sink on top will restrict the airflow over the pcb. The pcb has internal copper layers ('ground' is usually designed as a plane) which act as heat spreaders as well.
Do you say the other side of the pcb needs airflow too? I intended to force the airflow from the fans through the heatsinks only to maximize cooling. Do i have to rethink this? The chips are designed to release heat out of the bottom, and putting a heatsink on the top of the chips can restrict convection and cause the chips to overheat. The top of the board doesn't need additional air flow AFAIK. The fan on the heatsink should create enough airflow around the board that all you need on top is convection for the other parts. That is, don't cover it up, but no need for anything else. So it doesnt need airflow but then you say the fan will make enough air. But what will happen when i force the airflow ONLY through the heatsink. You know like creating a tunnel. I would like to take 2 miners with heatsink and put them together tight with the heatsinks. Then put a fan on the side and somehow build a tunnel that only allows the air flowing between the ribs of the heatsinks. Im not sure yet what material would be best for this but i think it would greatly effect the cooling because i think otherwise most of the air is going useless the easier way. So would that be possible or is it needed to put a little bit of the airflow to flow above the other sides of the boards. I believe convection is enough for the top of the board. Just don't plaster over it or cover it with a blanket.
|
|
|
|
burnin (OP)
Sr. Member
Offline
Activity: 243
Merit: 250
ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE
|
|
July 02, 2013, 05:52:51 PM |
|
Changed that dammed chip and: SUCCESS!
|
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
July 02, 2013, 06:01:11 PM |
|
Changed that dammed chip and:
SUCCESS!
Awesome work burnin
|
|
|
|
chanberg
|
|
July 02, 2013, 06:02:29 PM |
|
damn nice!
|
|
|
|
makngeerwork
Full Member
Offline
Activity: 141
Merit: 100
???
|
|
July 02, 2013, 06:08:52 PM |
|
Changed that dammed chip and: SUCCESS!Now this is fantastic news, can't wait to oc these puppies, congratulations on all your work! Love that hw number. You should be re-posted on any lists as hashing as well.....
|
███ TWITTER ████████████████████████████ FLUX ████████████████████████████ WHITEPAPER ███ ███ WEBSITE ██████████████████████ GAMING ECOSYSTEM █████████████████████ MEDIUM ███ ███ TELEGRAM ██████ VALVE ██████ UBISOFT ██████ Origin █████ GAMELOFT ███████ FACEBOOK ███
|
|
|
driksson
|
|
July 02, 2013, 06:09:44 PM |
|
Changed that dammed chip and: SUCCESS!But 5GH, must have been a full board then or?
|
|
|
|
fasmax
|
|
July 02, 2013, 06:15:15 PM |
|
Nice work!!! Can you tell us what chip was the problem. Thanks!!
|
|
|
|
Foofighter
|
|
July 02, 2013, 06:16:08 PM |
|
so nice, great work burnin!
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
rage1337
|
|
July 02, 2013, 06:18:18 PM |
|
great work!!! cant wait
|
|
|
|
titomane
|
|
July 02, 2013, 06:22:51 PM |
|
Congratulation GREAT JOB BURNIN
|
|
|
|
m5
Newbie
Offline
Activity: 82
Merit: 0
|
|
July 02, 2013, 06:39:01 PM |
|
No, the connector on the left side of the green connector. Im not sure what the green connectors cable would look like. You would most probably split the power from a psu via y-cables.
The green connector is a screw terminal, you just strip a few mm of wire and screw it into the connector. You can use it to daisy-chain the boards (connect PCI-E to first board, then run wires from first board screw terminal to second board screw terminal and so on). But I would not daisy-chain many boards like that, probably would use a star design (PCI-E to a board, then connect screw terminal to other few boards, so connect board 1-2, 1-3, 1-4 to not overload the wires). All the power connector are connected together, so you can use any combination of them. You connect the boards with data cables by the CAN connector and then connect the first board via USB/microUSB cable to a PC/RPi.
|
|
|
|
HeRetiK
Legendary
Offline
Activity: 3094
Merit: 2172
Playgram - The Telegram Casino
|
|
July 02, 2013, 06:39:30 PM |
|
Holy shit that's awesome! Great job!
|
|
|
|
▄▄███████▄▄███████ ▄███████████████▄▄▄▄▄ ▄████████████████████▀░ ▄█████████████████████▄░ ▄█████████▀▀████████████▄ ██████████████▀▀█████████ █████████████████████████ ██████████████▄▄█████████ ▀█████████▄▄████████████▀ ▀█████████████████████▀░ ▀████████████████████▄░ ▀███████████████▀▀▀▀▀ ▀▀███████▀▀███████ | ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ Playgram.io ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ | ▄▄▄░░ ▀▄ █ █ █ █ █ █ █ ▄▀ ▀▀▀░░
| │ | ▄▄▄███████▄▄▄ ▄▄███████████████▄▄ ▄███████████████████▄ ▄██████████████▀▀█████▄ ▄██████████▀▀███▄██▐████▄ ██████▀▀████▄▄▀▀█████████ ████▄▄███▄██▀█████▐██████ ██████████▀██████████████ ▀███████▌▐██▄████▐██████▀ ▀███████▄▄███▄████████▀ ▀███████████████████▀ ▀▀███████████████▀▀ ▀▀▀███████▀▀▀ | | │ | ██████▄▄███████▄▄████████ ███▄███████████████▄░░▀█▀ ███████████░█████████░░█ ░█████▀██▄▄░▄▄██▀█████░█ █████▄░▄███▄███▄░▄██████ ████████████████████████ ████████████████████████ ██░▄▄▄░██░▄▄▄░██░▄▄▄░███ ██░░░█░██░░░█░██░░░█░████ ██░░█░░██░░█░░██░░█░░████ ██▄▄▄▄▄██▄▄▄▄▄██▄▄▄▄▄████ ███████████████████████ ███████████████████████ | | │ | ► | |
|
|
|
torzsy
|
|
July 02, 2013, 06:46:47 PM |
|
Changed that dammed chip and:
SUCCESS!
Holy batman!
|
|
|
|
-Redacted-
|
|
July 02, 2013, 06:49:03 PM |
|
Absolutely awesome work from a master craftsman. There aren't many people on this entire planet that could pull that off. I NEED these! Of course now the questions are, how much, how many, and how long?
|
|
|
|
|