1080Ti Specific - Best mining option

[Riptide_NVN]

My stock clock FE gets 3050 kh/s with djm ccminer too.  Mining on mph. Seems a little slower than expected to me but not enough to be real concerned.

[crocozino]

Auto convert on Ahashpool is nice.

hm, never used it feature? why the hell guyz do you use it?!!
look, this feature is very untransparent - you do not know @ what exchange rate pool changes your coins
for example there is a pump and price gone up to 100 from 50. if you control your coin you can sell by stairs mode like 70 75 80 85 90 and be sure you took the profit.
and pool can exchange @ 100 - but give you only 70! no one can check it!
my opinion is simple - I change the coin myself and I control it

[Moondoggie]

Auto convert on Ahashpool is nice.

hm, never used it feature? why the hell guyz do you use it?!!
look, this feature is very untransparent - you do not know @ what exchange rate pool changes your coins
for example there is a pump and price gone up to 100 from 50. if you control your coin you can sell by stairs mode like 70 75 80 85 90 and be sure you took the profit.
and pool can exchange @ 100 - but give you only 70! no one can check it!
my opinion is simple - I change the coin myself and I control it

Because it's convenient.
Can set all the cards to profit switching software, and it will spit me out some BTC daily.

[NameTaken]

I prefer holding and waiting for the next pump to 2-10x its value.

[Moondoggie]

I prefer holding and waiting for the next pump to 2-10x its value.

With some coins I do this, but while i'm trying to ROI / expand my cards, I just sell the BTC and purchase more.

[dlukin]

Guys, just mine gbx, crc, ore or others.
It's more profitable than yours zcash, zcoin or another z-coin.

[manc]

I am still mining Zcoin getting 5$ + solid return with auto convert to BTC on Mining Pool Hub
Around 18 -21 $ a day with 3 1080 tis and the best part is they consume a lot less electric power then other algos
This is really good if you have expensive Electricty 0.2$kWh+
Anyways what is this About bulwark Earning 20$+ per card , whats the algo and Is it price stable ?
Or anyother algo that might give me more profit per card ?

I  also started mining Zcoin @ Mining Pool Hub but the Hub is only getting around 2200 hashes while I'm doing 3000.
Seems like a common problem with this Hub and coin.

Researching a bit to see if something else can get my full hash power...

Bounces up and down for me, but the average is pretty close

I tried official 2.2.2 ccminer, djm34 ccminer cuda 9 and another modded ccminer for 1080ti but getting 3050kH/s on the miner and AT THE MOST 1.55 MH/s reported @ MPH

--submit-stale

[pfft]

what are the best afterburner settings for neoscrypt ? Needs core or memory  ?

[BitBustah]

I prefer holding and waiting for the next pump to 2-10x its value.

With some coins I do this, but while i'm trying to ROI / expand my cards, I just sell the BTC and purchase more.

Same here. Going for ROI, then hodling.

[milicic]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

[daboehla]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

[milicic]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

I cant believe default settings are the best for this algo.
Could someone else share his settings and thoughts about mining this coin?

[Rashkae]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

[brenthore]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

Thats not pretty bad,maybe his tdp is 70% or something, 1080ti lyra2rev2 hashrate range to 68 to 80 depends on powerlimit and oc.

[Rashkae]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

Thats not pretty bad,maybe his tdp is 70% or something, 1080ti lyra2rev2 hashrate range to 68 to 80 depends on powerlimit and oc.

He said "default settings".

[milicic]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

Could you please tell me what are your clock setting and what miner you use? What pool?
Thanks

[pfft]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

I really don`t think you get 72mh

[abudfv2008]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

I really don`t think you get 72mh

[marcos5872]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

I really don`t think you get 72mh

What ccminer version do you use?

[Kejvu]

I plan to mine vertcoin with my 6xgtx 1080ti Asus strix. Could you please tell me what is better mining software alexis ccminer or that Nanashi-Meiyo-Meijin v2.2 miner?
What are your settings for lyra2v2 with highest hashrates?
What is the best pool to use?
Thanks in advance

I use ccminer 1.8.3. This is the version from OneClickMiner. Gives me the best performance.
~68MH/s per 1080TI (Zotac AMP something)

running with default settings.

I use "private" p2pool. Public p2pool give me to many payouts.
If you want to join, drop me a PM

That's pretty bad, most of us were getting 72MH at 80% TDP and 78 at 100% TDP.

I really don`t think you get 72mh

can you tell us your OC settings?