[ANN] [QRK] Quark | POW/POS | 0.10.8.0 - New Self Moderated Thread

[ghzsymc2]

I uploaded a block file of renidex

When you're asked to type txindex=1

It will be available

This saves time in setting up the masternode

https://mega.nz/#!P7IETAQL!y687XXNYaPE8hbgkhXYJWAN05ajoE6xJjeM_Qa-fX-o                （renidex）

-------------

In addition to paste again regular block data

https://mega.nz/#!Xy4VCKJR!3VbR-HzV2VDnmNG0tgQTYfa72Gs3EtOsAvugx_e-y5Y               （normal）

[Deluxo]

Hello,

What should be the current MN reward? I feel something is not right...

[TeamElectric]

Hello,

What should be the current MN reward? I feel something is not right...

2.46277

[TeamElectric]

I have three masternodes stuck at 7282818, Restart Required.

[TeamElectric]

I have three masternodes stuck at 7282818, Restart Required.

Stuck again at 7283336

[TeamElectric]

I have three masternodes stuck at 7282818, Restart Required.

Stuck again at 7283336

and again 7283563

[wishxy]

Any Quark masternode setup guide?

[ghzsymc2]

I have three masternodes stuck at 7282818, Restart Required.

Stuck again at 7283336

and again 7283563

This may be due to the presence of some version or older version in the network

First make sure you are 0.10.7.4

Then You can then search the Explorer for some nodes to add to the quarkcoin.conf file

[ghzsymc2]

The official website has added the download of logo and block data

https://quarkcoin.info/resource_download/

[lor2ex]

How to install linux wallet 0.10.7.4, with only quarkd file?

[Deluxo]

How to install linux wallet 0.10.7.4, with only quarkd file?

You need to give it rights and then run it as deamon. It will creat its files. Then just eddit the quarkcoin.conf and move the -cli (see page 48 and the next two).

[lor2ex]

How to install linux wallet 0.10.7.4, with only quarkd file?

You need to give it rights and then run it as deamon. It will creat its files. Then just eddit the quarkcoin.conf and move the -cli (see page 48 and the next two).

Thx bro, but i can't find -cli after install quarkd.
And if i start service (like in post 966):

Code:

Job for quarkMN1.service failed because the control process exited with error code.
See "systemctl status quarkMN1.service" and "journalctl -xe" for details.

[TeamElectric]

I have three masternodes stuck at 7282818, Restart Required.

Stuck again at 7283336

and again 7283563

This may be due to the presence of some version or older version in the network

First make sure you are 0.10.7.4

Then You can then search the Explorer for some nodes to add to the quarkcoin.conf file

Really? You think I'm running 3 masternodes without having a clue?
I am connected to nodes that have progressed further. Mine are failing at certain levels, Instead of teaching us how to suck eggs, how about looking into the problem.
Stuck again at 7285276!

[AggroHead]

8 of my 10 masternodes stock on
block
7289807

each one uses a conf-file with different addnodes
also my desktop-wallet stuck at same block.

after restart wallet, it works again. But not for long time...

[Tuwan]

8 of my 10 masternodes stock on
port
7289807

each one uses a conf-file with different addnodes
also my desktop-wallet stuck at same block.

after restart wallet, it works again. But not for long time...

Facing the same issue from the beginning, now I am getting rewards,
but not sure I getting correct amount of QRK as reward. For each MN's

Most of time our MN's stats not match with data https://masternodes.online/currencies/QRK/


This what ghzsymc2 said sometimes back


When my wallet gets stuck though I need to reboot

But my MN didn't go down

My rewards were still allocated to me on time

[TeamElectric]

8 of my 10 masternodes stock on
port
7289807

each one uses a conf-file with different addnodes
also my desktop-wallet stuck at same block.

after restart wallet, it works again. But not for long time...

Facing the same issue from the beginning, now I am getting rewards,
but not sure I getting correct amount of QRK as reward. For each MN's

Most of time our MN's stats not match with data https://masternodes.online/currencies/QRK/


This what ghzsymc2 said sometimes back


When my wallet gets stuck though I need to reboot

But my MN didn't go down

My rewards were still allocated to me on time

Same thing here.
Rewards are still allocated but my masternodes are not assisting the network.
The newer rewards can be seen on the explorer but the local height is stuck.
On restart the rewards are visible locally. 2/3 currently stuck at 7289742

Glad to see I'm not the only one in this sad state. (Misery loves company)

[TeamElectric]

Stuck 7292626
Peer Height 7293994

[lor2ex]

Stuck 7294024
Peer Height 7294637

[TeamElectric]

The interval between required restarts is reducing to ridiculous levels. Currently sub 1 hour.
Surely an admission of broken is in order?

[AggroHead]

This coin daemon for masternode is terribly unreliable.

I host a 32 GB vps with 10 masternodes on it. (yes, swap-file on ssd)
Since there is no solution to get the masternodes running stable, I want to share my script.

I created a crontab (running every 10 minutes). It checks blockcount from explorer and compare to masternode's-blockcount.
If blockcount of any (node or explorer) is newer than (-gap of 5 blocks) OR block is the same as last cron-run (because explorer also hangs sometimes) --> it stop mn-daemon (and systemctl restart it automatically).

Feel free to use this kind of shit-script to keep rewards running. (And yes rewards are still incomming but if your mn hangs on block for several hours, you need to restart mn from wallet again, to get rewards again.
Some of my mn's hangs every ~30-120 minutes, so rewards never began to run.  

script.sh

Code:

#!/bin/bash


#Console Colour
BLUE="\033[0;34m"
YELLOW="\033[0;33m"
CYAN="\033[0;36m" 
PURPLE="\033[0;35m"
RED='\033[0;31m'
GREEN="\033[0;32m"
MAG='\e[1;35m'
NC='\033[0m'


coin_cli=/usr/local/bin/quark-cli
blockcount_gap=5
logfile=/root/mnh-status.log

# /root/*subfolder* = masternode-instance
# mn-01  mn-02  mn-03  mn-04  mn-05  mn-06  mn-07  mn-08  mn-09  mn-10
mns=$(ls /root/ | grep mn-)

function log() {
	logtime=$(date '+%H:%M:%S')
	C=$1
	LS="$2"
	echo -e "$logtime: ${C}$LS${NC}"
}
function logtf() {
	log $1 "$2"
	LS="$2"
	logtime=$(date '+%Y-%m-%d %H:%M:%S')
	echo "$logtime: $LS" >> $logfile
}

blockcount=$(curl -s https://chainz.cryptoid.info/qrk/api.dws?q=getblockcount --max-time 5)
if [ $? -ne 0 ]; then
	blockcount=0
fi

lastblockcount=$(cat /root/mnh-lastblock.txt)
if [ $? -ne 0 ]; then
	lastblockcount=0
fi

for mn in $mns ; do
	mbc=$($coin_cli -datadir=/root/$mn getblockcount 2>/dev/null)
	mst=$?
	if [ $mst -eq 0 ]; then
		if [ $mbc -gt $blockcount ]; then
			blockcount=$mbc
		fi
	fi
done

echo $blockcount > /root/mnh-lastblock.txt

logtf $YELLOW "Highest Block: $blockcount"
logtf $YELLOW "   Last Block: $lastblockcount"

if [ $blockcount -le $lastblockcount ]; then
	logtf $RED "Same blockcount as last run!"
	for mn in $mns ; do
		mbc=$($coin_cli -datadir=/root/$mn getblockcount 2>/dev/null)
		mst=$?
		mbcg=$(($mbc-$blockcount))
		logtf $NC "$mn   Status: $mst   Block: $mbc ($mbcg)"
		
		if [ $mst -eq 0 ]; then
			logtf $RED "$mn stopping"
			$coin_cli -datadir=/root/$mn stop >/dev/null
		fi
	done
else
	for mn in $mns ; do
		mbc=$($coin_cli -datadir=/root/$mn getblockcount 2>/dev/null)
		mst=$?
		mbcg=$(($mbc-$blockcount))
		logtf $NC "$mn   Status: $mst   Block: $mbc ($mbcg)"
		
		if [ $mst -eq 0 ]; then
			if [ $mbc -le $(($blockcount-$blockcount_gap)) ]; then
				logtf $RED "$mn stopping"
				$coin_cli -datadir=/root/$mn stop >/dev/null
			fi
		fi
	done
fi

to monitor all my nodes I use this little oneliner:

Code:

watch -n 1 'echo -n "mn01: " && quark-cli -datadir=/root/mn-01 getblockcount && quark-cli -datadir=/root/mn-01 masternode status | grep status && echo && echo -n "mn02: " && quark-cli -datadir=/root/mn-02 getblockcount && quark-cli -datadir=/root/mn-02 masternode status | grep status && echo && echo -n "mn03: " && quark-cli -datadir=/root/mn-03 getblockcount && quark-cli -datadir=/root/mn-03 masternode status | grep status && echo && echo -n "mn04: " && quark-cli -datadir=/root/mn-04 getblockcount && quark-cli -datadir=/root/mn-04 masternode status | grep status && echo && echo -n "mn05: " && quark-cli -datadir=/root/mn-05 getblockcount && quark-cli -datadir=/root/mn-05 masternode status | grep status && echo && echo -n "mn06: " && quark-cli -datadir=/root/mn-06 getblockcount && quark-cli -datadir=/root/mn-06 masternode status | grep status && echo && echo -n "mn07: " && quark-cli -datadir=/root/mn-07 getblockcount && quark-cli -datadir=/root/mn-07 masternode status | grep status && echo && echo -n "mn08: " && quark-cli -datadir=/root/mn-08 getblockcount && quark-cli -datadir=/root/mn-08 masternode status | grep status && echo && echo -n "mn09: " && quark-cli -datadir=/root/mn-09 getblockcount && quark-cli -datadir=/root/mn-09 masternode status | grep status && echo && echo -n "mn10: " && quark-cli -datadir=/root/mn-10 getblockcount && quark-cli -datadir=/root/mn-10 masternode status | grep status'