[ANN][TZC] TrezarCoin Super-Secure-PoW/PoS

[ChekaZ]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

Excuse me. But I have coins in my wallet for 48h already. The wallet is running, it is not encrypted or locked.
What I'm doing wrong?
It still shows 12minutes of minage as in the previous post.

Yours looks fine, you just haven't found a PoS block yet.

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

comrades and how to solo mine that? )

I wouldnt recommend it, nethashrate is pretty high.

What means "and your wallet needs to be unlocked"?

Bottom right is a keylock, if its locked you arent able to stake, you need to unlock it. If there isnt a keylock, you are 'fine', than you didnt encrypt it by now

[1714877197]

1714877197

[1714877197]

1714877197

[Dennoo]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

comrades and how to solo mine that? )

I wouldnt recommend it, nethashrate is pretty high.

thx mate

[cryptodunno]

also new here
Does anyone mine on GTX 1060?
cannot find any sensible calculator for neoscrypt so wondering if 500 kh/s is okay with ccminer?

gtx1060 3gb Hynix
630kh/s
core +175 memory -500 pl 100

what miner do you use?

[eur]

Hi developer, I made a small advertisement, your successful project, in the Russian community, will not refuse gratitude. http://miningclub.info/threads/perspektivnaja-moneta-trezar-neoscrypt.17844/

[abudfv2008]

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

Excuse me. But I have coins in my wallet for 48h already. The wallet is running, it is not encrypted or locked.
What I'm doing wrong?
It still shows 12minutes of minage as in the previous post.

Yours looks fine, you just haven't found a PoS block yet.

Ok. But what should be the rate of POS with 1000coin?

[ChekaZ]

Hi developer, I made a small advertisement, your successful project, in the Russian community, will not refuse gratitude. http://miningclub.info/threads/perspektivnaja-moneta-trezar-neoscrypt.17844/

Thanks for that post!

so the config is running correctly now, but it still says no mature coins staking paused.

but i have no immature coins, where is the mistake?

You need to have the coins in your wallet for at least 24h and your wallet needs to be unlocked.

Excuse me. But I have coins in my wallet for 48h already. The wallet is running, it is not encrypted or locked.
What I'm doing wrong?
It still shows 12minutes of minage as in the previous post.

Yours looks fine, you just haven't found a PoS block yet.

Ok. But what should be the rate of POS with 1000coin?

There is no fixed % rate for PoS

[Ryuh]

I can confirm that with the .conf setup from main post staking is working.
I hit my first block with 260 staked coins.

[JohnnyR20]

Hi developer, I made a small advertisement, your successful project, in the Russian community, will not refuse gratitude. http://miningclub.info/threads/perspektivnaja-moneta-trezar-neoscrypt.17844/

Thanks for that post!

He used google translate for this and typed only 2 pools..Can't even copy-past all text. Meh!

ATM our community don't belive in project, but i do

Also he don't provided info about POW and POS.

[ChekaZ]

I can confirm that with the .conf setup from main post staking is working.
I hit my first block with 260 staked coins.

Thanks for the confirmation.

Hi developer, I made a small advertisement, your successful project, in the Russian community, will not refuse gratitude. http://miningclub.info/threads/perspektivnaja-moneta-trezar-neoscrypt.17844/

Thanks for that post!

He used google translate for this and typed only 2 pools..Can't even copy-past all text. Meh!

ATM our community don't belive in project, but i do

Also he don't provided info about POW and POS.

Did only view the post shortly, better look more into it next time, thanks

[fhakenzz]

AM I STAKING on POS with this on the lower right corver of my wallet it says :
 staking is enabled for 11 inputs weighing 190 coin days
Inputs : 11 minutes . age, 0 avg.age, 0 max. age

[ChekaZ]

AM I STAKING on POS with this on the lower right corver of my wallet it says :
 staking is enabled for 11 inputs weighing 190 coin days
Inputs : 11 minutes . age, 0 avg.age, 0 max. age

Yes you do

[joppiesaus]

Cant get solominer to work.
got nvidia gpu.
have the wallet and my adress downloaded.
have nsgminer downloaded from your post on page 1.
have created a bat file with my adress .
this is the code:
nsgminer --neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC -g 1 -w 128 -I 16 --gpu-platform 1 --gpu-engine 950 --gpu-memclock 1500

it is in 1 line , is that correct?
or should it be :
nsgminer
--neoscrypt
-o stratum+tcp://eu1.altminer.net:4233
etc?

please, it is very unclear how to get mining running for noobs:)

when i open nsgminer.exe  ( or should i open nsgminer -rpc ? >>>same thing happens btw) a popup window appears and disappears quickly.
thanks

[CannaMish]

ccminer.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC

you will get better hash rate with ccminer with nvidia good luck

[ChekaZ]

Cant get solominer to work.
got nvidia gpu.
have the wallet and my adress downloaded.
have nsgminer downloaded from your post on page 1.
have created a bat file with my adress .
this is the code:
nsgminer --neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC -g 1 -w 128 -I 16 --gpu-platform 1 --gpu-engine 950 --gpu-memclock 1500

it is in 1 line , is that correct?
or should it be :
nsgminer
--neoscrypt
-o stratum+tcp://eu1.altminer.net:4233
etc?

please, it is very unclear how to get mining running for noobs:)

when i open nsgminer.exe  ( or should i open nsgminer -rpc ? >>>same thing happens btw) a popup window appears and disappears quickly.
thanks

ccminer.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC

you will get better hash rate with ccminer with nvidia good luck

Yes download the CCminer and take his commandline.

[joppiesaus]

had tried ccminer before.
but got an error when opening ccminer64_65 ( as well as if i open  ccminer64_76) .


" the code execution cannot proceed because MSVCP100.dll was not found.Reinstalling the probgram may fox this problem."

Same error when i made the .bat file witht he code you wrote for me.
my .bat file is nameless btw, i have just saved the txt file as " .bat" .

thoughts?
thanks a lot

[JohnnyR20]

had tried ccminer before.
but got an error when opening ccminer64_65 ( as well as if i open  ccminer64_76) .


" the code execution cannot proceed because MSVCP100.dll was not found.Reinstalling the probgram may fox this problem."

Same error when i made the .bat file witht he code you wrote for me.
my .bat file is nameless btw, i have just saved the txt file as " .bat" .

thoughts?
thanks a lot

Install

Visual C++ для Visual Studio 2010  64 bit version

And rename your .bat file > start-tzc.bat or something else

[joppiesaus]

thank you,
did all that.
the error is gone.
however now when i run ccminer64_65 a black window pop ups and disappears without doing anything basically, dont get an error neither.

[joppiesaus]

since i run ccminer64_65  and not ccminer.exe ( i do not see the shortcut btw?, i only see those files  ccminer32_65 , ccminer32_75, ccminer64_65 and ccminer64_75,Licence.+ my bat file )
should the code in the bat file be ccminer.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC
and not                                     ccminer.exe64_65 -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC?
noob question prolly, trying to be helpfull too
thanks again

[divedaucd]

I used the conf:
irc=1
dns=1
qtstyle=2
daemon=1
server=1
stakegen=1
logtimestamps=1
minersleep=2000
stakemintime=24
stakecombine=200
stakesplit=400
port=15298
rpcport=15299
rpcuser=username
rpcpassword=password
addnode=162.217.249.198:17298
addnode=46.4.0.101:17298

Since last night (my time zone) but now over 8 hours it still show "No mature coins found, staking pause" . How long the wallet will stake?

[JohnnyR20]

since i run ccminer64_65  and not ccminer.exe ( i do not see the shortcut btw?, i only see those files  ccminer32_65 , ccminer32_75, ccminer64_65 and ccminer64_75,Licence.+ my bat file )
should the code in the bat file be ccminer.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC
and not                                     ccminer.exe64_65 -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU-p c=TZC?
noob question prolly, trying to be helpfull too
thanks again

insert this line to your .bat file

ccminer64_75 -a neoscrypt -o stratum+tcp://eu1.altminer.net:4233 -u TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU -p c=TZC

---------

I presume that TjF7V6wghfghNV1myadresseditedxB6tZoNPnbU is your wallet, if it's not insert yours