Bhaal1
Newbie
Offline
Activity: 80
Merit: 0
|
|
June 01, 2018, 05:02:48 PM |
|
Hi, a new Cast XMR version is available. Regards, glph3k Cast XMR Version 1.1.0 (2018/6/1)- All new --intensity option to specify the memory allocation in the range of 0 to 10, up to 12 for Vega Frontier Edition. The default setting will correspond with the settings of version 1.0 and are displayed at startup. - Vega Frontier 'Large Pages' support added, up to 30% higher hash rates for CryptoNight-Heavy, 5% increase for CryptoNight - Includes the switch-radeon-gpu command line tool to restart GPUs, switch on/off HBCC, Compute Mode and Large Pages - Nicehash supports now up to 24 GPUs - --maxmem option is deprecated, will now be mapped to an corresponding intensity setting - --forcecompute is deprecated, 'Compute Mode' of Polaris GPUs will be automatically detected. To overwrite use the --intensity option - Default mining algo changed to CryptoNightV7, to still mine CryptoNight Classic add --algo=0- Tested with Radeon Adrenalin Driver 18.4.1 Download Cast XMR 1.1.0 for Windows (64bit)SHA256 hash of cast_xmr-vega-win64_110.zip: 4d477d47117ea51e27e730bbe5676e53a18e0ca8f69fa3d41bcdd74d4a453075 Thank you very much! Just as feedback: for me (4x Vega56) all --intensity values are worse than the default of 8. Cheers
|
|
|
|
duyquang06
Newbie
Offline
Activity: 154
Merit: 0
|
|
June 01, 2018, 06:22:55 PM |
|
Has anyone know how to try new --hbcc command? ()
It seems can't add syntax --hbcc=off in bat file (Cast 1.1 recommend to turn it off to change/better instensity and IDK how to use command)
|
|
|
|
|
billhinge
Member
Offline
Activity: 104
Merit: 10
|
|
June 01, 2018, 09:21:11 PM |
|
Hmm, thought I would give it a try only getting 200H/s or less with vega fe, I was getting 2200+ before with another miner using 18.4.1
On start it says large pages not enabled so use switch-radeon-gpu -G 0 --largepages=on restart , I do that by running command from a batch file, screen flickers and it says done but when I run the run.bat it still says not enabled
|
|
|
|
Tarv
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 01, 2018, 10:25:10 PM Last edit: June 01, 2018, 10:50:38 PM by Tarv |
|
Hey, just noticing a UI error with switch-radeon-gpu. Looks like it's mixing up the names. 4,5 are in fact the VEGA cards. Numbered order matches CLINFO as well. Detected OpenCL Platform: OpenCL 2.1 AMD-APP (2580.6)
GPU0: Radeon RX Vega (gfx804) ... no changes. GPU1: Radeon RX Vega (gfx804) ... no changes. GPU2: Radeon RX 550 Series (gfx804) ... no changes. GPU3: Radeon RX 550 Series (gfx804) ... no changes. GPU4: Radeon RX 550 Series (gfx900) ... no changes. GPU5: Radeon RX 550 Series (gfx900) ... no changes.
GPU0: Radeon RX Vega (gfx804) GPU1: Radeon RX Vega (gfx804) GPU2: Radeon RX 550 Series (gfx804) GPU3: Radeon RX 550 Series (gfx804) GPU4: Radeon RX 550 Series (gfx900) | HBCC: OFF | Large Pages: ON GPU5: Radeon RX 550 Series (gfx900) | HBCC: OFF | Large Pages: ON
|
|
|
|
TheRealSTU
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 02, 2018, 01:35:32 AM |
|
Detected OpenCL Platform: OpenCL 2.1 AMD-APP (2580.6)
GPU0: Radeon RX Vega (gfx900) | HBCC: OFF | Large Pages: OFF GPU1: Radeon RX Vega (gfx900) | HBCC: OFF | Large Pages: ON GPU2: Radeon RX Vega (gfx900) | HBCC: OFF | Large Pages: ON GPU3: Radeon RX Vega (gfx900) | HBCC: OFF | Large Pages: ON GPU4: Radeon RX Vega (gfx900) | HBCC: OFF | Large Pages: ON Can't seem to turn on Large Pages for 1 card even after full restart. I get a success message but no change. I'm running Intel iGPU as primary (connected with display and set in bios). Tried changing PCI-E slot, v18.4.1, v18.5.1, safe-mode, gpu bios switch - still nothing. I know it probably won't improve non-Vega Frontier hash rates but I'm really curious
|
|
|
|
SpceGhst
Jr. Member
Offline
Activity: 269
Merit: 4
|
|
June 02, 2018, 01:36:44 AM |
|
A little help please: GPU 0 in my 5 card rig is showing fan speed of -1 rpm and temp of -1* C. It’s not the card, riser, or cable, as both Wattman and GPUz shows fan speed and temp. If I rearrange the riser cables, it’s always GPU 0 not reading sensors. Any ideas?
Problem solved… well kind of. Turns out Cast doesn’t like non-RX cards in the rig. I was running a R7 240 as my monitor connection but not mining on it. I replaced it with an RX 570 and now all sensors show correct for GPU 0.
|
|
|
|
glph3k (OP)
|
|
June 02, 2018, 08:40:44 AM |
|
Hi, thanks for the info. Seems like a solid bug, will hammer it out in the next version. Regards, glph3k Hey, just noticing a UI error with switch-radeon-gpu.
Looks like it's mixing up the names. 4,5 are in fact the VEGA cards. Numbered order matches CLINFO as well.
|
|
|
|
Combat Fighter
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 02, 2018, 05:37:32 PM |
|
I get the same speeds with intensity=10 for all my Vega64’s compared to v1.0.
Seems to work just as well. One thing I have not tried yet is the cast-xmr UI as it would not work with more than 8 vega’s and the beta now suppports up to 24 cards (not sure how that’s been tested as the drivers only allow 13 cards max!).
Hopefully the UI works now, will give it a test later.
|
|
|
|
TheRealSTU
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 02, 2018, 11:16:07 PM |
|
I seem to be getting best Vega 56 hash rates with intensity=10 for Hynix memory and intensity=7 for Samsung memory. In other words leaving Samsung at default 7 (higher intensity drops hash rate), max intensity for Hynix improves it by about 50-100 H/s.
Driver v18.5.1 seems to drop my hash rates by about 100 H/s for all cards compared to v18.4.1.
Anyone else getting same results?
|
|
|
|
DonGato
Copper Member
Jr. Member
Offline
Activity: 63
Merit: 6
|
|
June 03, 2018, 02:28:49 PM |
|
Dear Gandalph3K,
I lose about 100h/s on CN Heavy with version 1.1.0. Using adrenaline drivers, with Max intensity. from about 1520-1550-->1410ish With my Vega 56's Samsung memory, my hynix drops to about 1300h/s.
Also, and i dont know why but the way i get 1500h/s+ on my veg 56's is by opening a CN V7 cast window first then after i close it and open up a CN Heavy it hashes faster. Pools do reflect increased hash-rate as well.
|
|
|
|
BroganBloodstone
|
|
June 03, 2018, 02:33:12 PM |
|
Any chance of dropping developer fee to around 1% dev? With more competition now, it would certainly help. I only ask because I have hesitated using cast xmr due to the higher fee. No disrespect or anything.
|
|
|
|
ripcurrent
Member
Offline
Activity: 160
Merit: 10
|
|
June 03, 2018, 03:25:21 PM |
|
When using the switch-radeon-gpu command with vega's is it better to run with the HBCC Memory on or off?
thx
|
|
|
|
boysie
Newbie
Offline
Activity: 43
Merit: 0
|
|
June 03, 2018, 08:49:48 PM |
|
if you have HBCC on when you run the miner it pops up saying its recommended to turn it off
|
|
|
|
newnonce
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 03, 2018, 08:55:39 PM |
|
Dear Gandalph3K,
I lose about 100h/s on CN Heavy with version 1.1.0. Using adrenaline drivers, with Max intensity. from about 1520-1550-->1410ish With my Vega 56's Samsung memory, my hynix drops to about 1300h/s.
Also, and i dont know why but the way i get 1500h/s+ on my veg 56's is by opening a CN V7 cast window first then after i close it and open up a CN Heavy it hashes faster. Pools do reflect increased hash-rate as well.
DonGato - Thanks for pointing that out. I was seeing 1400+ 56's and 1500+ 64's on a rig running 18.3.4 drivers (CN Heavy) but wondered how and why because I have another rig which was running 18.5.2 and seeing 1200/1300+ 56's and 1500+ 64's (CN Heavy). Went through a bunch of DDU uninstall reinstalls and then saw your post...sure enough now both rigs have higher hashes after using your trick! HBCC and large pages are OFF as far as I can tell from the utility. My rigs were setup using the vegamining guide with a mix of 56/64/580 brands that have Hynix/Samsung memory. Stock 56/64 bios, tweaked 580 bios, compute mode via AMD Wattman and clocks from powerplay tables and overdriveN tool. Silicon lottery does not give me peak on all cards but a heck of a lot better than previous speeds. Gandalph3k, this latest version is solid with higher hash as well - well done!
|
|
|
|
boysie
Newbie
Offline
Activity: 43
Merit: 0
|
|
June 03, 2018, 09:10:10 PM |
|
my single vega fe is on 2180 with cryptonight-heavy with large pages on. using 18.4.1 gaming mode driver.
|
|
|
|
Eddo25
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 04, 2018, 01:56:07 AM Last edit: June 04, 2018, 03:36:40 AM by Eddo25 |
|
How do you get 2000khs on Radeon Vega Frontier?
I have Large pages on/HMB off and clock speeds of 1407mhz Ram 1107 and only get just under 1500. Also using Gaming Driver 18.3.1.
Edit, NM. I updated to the 18.5.2 Driver and I'm getting about 2050khs now!
|
|
|
|
altpc
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 04, 2018, 02:57:56 AM |
|
Has anyone tried the rx580 in this new version? reach 890 h/s in cn-heavy?
|
|
|
|
P00P135
|
|
June 04, 2018, 04:37:15 AM |
|
Any chance of dropping developer fee to around 1% dev? With more competition now, it would certainly help. I only ask because I have hesitated using cast xmr due to the higher fee. No disrespect or anything.
WTF is wrong with people... holy crap.
|
|
|
|
AlexanderDumas
Newbie
Offline
Activity: 206
Merit: 0
|
|
June 04, 2018, 04:43:18 AM |
|
Any chance of dropping developer fee to around 1% dev? With more competition now, it would certainly help. I only ask because I have hesitated using cast xmr due to the higher fee. No disrespect or anything.
WTF is wrong with people... holy crap. Exactly. Complaining for just 0.5%... If you do not like the fee just switch to something else.
|
|
|
|
|