|
Isokivi
|
 |
September 06, 2013, 06:11:43 PM |
|
I keep trying to shutdown my rPi and it seems to follow that process but soon it always ends in the login screen again and as a side note, without shutting down. Probably it's not caused by it but in the shutdown sequence I happen to see something like 'miner' not found or something like that.
Any reason for these issues? I use 'shutdown now.'
try: shutdown -h now |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
|
|
|
|
|
|
|
Once a transaction has 6 confirmations, it is extremely unlikely that an attacker without at least 50% of the network's computation power would be able to reverse it.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Aajo
Member
 Offline
Activity: 94
Merit: 10
|
|
September 06, 2013, 06:13:05 PM |
|
looks like I had bad luck with h-board 1, should I try to change it to bank 2 or turn off autotuning for chip 8-16 and set them to 50?
you should swap 0 and 4. And check for tight and even seating of the h-boards. getting even worse if I change the h-boards.. I checked for soldering errors on the m-board - but nothing to see. Next I'm gonna try to populate bank 2 and 3.. 1 AIfDSo 54 0.000 0.000 0 176 0 0 0 [0:0] 728 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 12 11 10 11 11 11 11 11 11 11 11 speed->0
2 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:1] 704 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
3 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:2] 729 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
4 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:3] 688 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
5 AIfDSo 54 0.000 0.000 0 0 0 2 0 [0:4] 697 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
6 AIfDSo 54 0.000 0.750 0 0 0 20 71 [0:5] 690 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
7 AIfDSo 54 0.000 0.159 0 0 0 10 15 [0:6] 727 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
8 AIfDSo 54 0.000 0.000 0 0 0 5 0 [0:7] 744 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
9 AIfDSo 54 0.000 0.719 0 0 0 6 68 [0:8] 739 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
10 AIfDSo 54 0.000 0.000 0 0 0 11 0 [0:9] 731 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
11 AIfDSo 54 0.000 0.000 0 0 0 16 0 [0:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
12 AIfDSo 54 0.000 0.000 0 0 0 5 0 [0:B] 748 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
13 AIfDSo 54 0.000 0.000 0 1 0 11 0 [0:C] 748 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
14 AIfDSo 54 0.000 0.011 0 1 0 13 1 [0:D] 745 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 speed->0
15 AIfDSo 54 0.000 0.264 0 16 0 13 25 [0:E] 752 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 1 1 1 0 1 0 0 1 0 2 1 1 1 speed->0
16 AIfDSo 54 0.186 0.275 13 18 1 7 26 [0:F] 712 1 1 1 0 0 0 0 1 1 1 2 1 1 1 1 1 1 2 1 2 1 2 0 0 0 0 1 1 2 1 2 2 speed->0
17 AIfDSo 54 1.589 1.469 111 0 0 0 139 [4:0] 569 7 7 7 7 7 7 7 6 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
18 AIfDSo 54 1.360 1.490 95 1 0 0 141 [4:1] 594 6 6 6 6 6 6 6 6 6 6 6 6 6 6 5 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
19 AIfDSo 54 1.403 1.501 98 0 0 0 142 [4:2] 586 7 7 6 6 6 6 6 6 6 6 6 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 54 1.646 1.385 115 0 0 0 131 [4:3] 568 7 7 7 7 8 8 8 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
21 AIfDSo 54 0.329 0.317 23 1 0 0 30 [4:4] 666 2 2 2 2 2 2 2 2 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
22 AIfDSo 54 1.546 1.564 108 0 0 0 148 [4:5] 569 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 AIfDSo 54 1.847 1.522 129 0 0 0 144 [4:6] 554 8 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
24 AIfDSo 54 1.561 1.511 109 0 0 0 143 [4:7] 560 7 7 7 7 7 7 7 7 7 7 7 7 7 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
25 AIfDSo 54 0.000 1.427 0 2238 0 2 135 [4:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 319 319 320 0 320 320 0 0 0 0 0 0 0 320 320 speed->0
26 AIfDSo 54 1.274 1.437 89 1 0 6 136 [4:9] 600 6 5 6 6 6 6 6 6 6 5 5 5 4 5 6 6 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
27 AIfDSo 54 0.000 1.448 0 2527 0 6 137 [4:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 316 316 316 0 316 316 315 316 316 0 speed->0
28 AIfDSo 54 1.288 1.268 90 3 0 0 120 [4:B] 616 4 5 5 5 6 5 5 6 7 7 6 6 6 6 6 5 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 1
29 AIfDSo 54 0.100 0.264 7 0 0 2 25 [4:C] 734 0 0 1 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 AIfDSo 54 0.000 0.317 0 11 0 0 30 [4:D] 741 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 speed->0
31 AIfDSo 54 1.561 1.543 109 3 0 8 146 [4:E] 587 6 6 6 8 8 8 7 5 7 7 7 7 7 7 7 6 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1
32 AIfDSo 54 0.000 0.011 0 0 0 16 1 [4:F] 750 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
speed:1728 noncerate[GH/s]:15.691 (0.490/chip) hashrate[GH/s]:20.653 good:1096 errors:4997 spi-errors:1 miso-errors:159 jobs:375 (record[GH/s]:0.000)
0: 864 0.186 2.177 13 212 1 119
4: 864 15.505 18.476 1083 4785 0 40
|
|
|
|
|
Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
September 06, 2013, 06:15:11 PM |
|
put 4 in 8 and 0 in 4. Check seating. Let them run 10 Minutes.
|
|
|
|
|
|
Isokivi
|
|
September 06, 2013, 06:15:19 PM |
|
looks like I had bad luck with h-board 1, should I try to change it to bank 2 or turn off autotuning for chip 8-16 and set them to 50?
you should swap 0 and 4. And check for tight and even seating of the h-boards. getting even worse if I change the h-boards.. I checked for soldering errors on the m-board - but nothing to see. Next I'm gonna try to populate bank 2 and 3.. 1 AIfDSo 54 0.000 0.000 0 176 0 0 0 [0:0] 728 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 11 11 12 11 10 11 11 11 11 11 11 11 11 speed->0
2 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:1] 704 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
3 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:2] 729 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
4 AIfDSo 54 0.000 0.000 0 0 0 0 0 [0:3] 688 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
5 AIfDSo 54 0.000 0.000 0 0 0 2 0 [0:4] 697 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
6 AIfDSo 54 0.000 0.750 0 0 0 20 71 [0:5] 690 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
7 AIfDSo 54 0.000 0.159 0 0 0 10 15 [0:6] 727 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
8 AIfDSo 54 0.000 0.000 0 0 0 5 0 [0:7] 744 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
9 AIfDSo 54 0.000 0.719 0 0 0 6 68 [0:8] 739 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
10 AIfDSo 54 0.000 0.000 0 0 0 11 0 [0:9] 731 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
11 AIfDSo 54 0.000 0.000 0 0 0 16 0 [0:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
12 AIfDSo 54 0.000 0.000 0 0 0 5 0 [0:B] 748 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
13 AIfDSo 54 0.000 0.000 0 1 0 11 0 [0:C] 748 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
14 AIfDSo 54 0.000 0.011 0 1 0 13 1 [0:D] 745 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 speed->0
15 AIfDSo 54 0.000 0.264 0 16 0 13 25 [0:E] 752 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 1 1 1 0 1 0 0 1 0 2 1 1 1 speed->0
16 AIfDSo 54 0.186 0.275 13 18 1 7 26 [0:F] 712 1 1 1 0 0 0 0 1 1 1 2 1 1 1 1 1 1 2 1 2 1 2 0 0 0 0 1 1 2 1 2 2 speed->0
17 AIfDSo 54 1.589 1.469 111 0 0 0 139 [4:0] 569 7 7 7 7 7 7 7 6 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
18 AIfDSo 54 1.360 1.490 95 1 0 0 141 [4:1] 594 6 6 6 6 6 6 6 6 6 6 6 6 6 6 5 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
19 AIfDSo 54 1.403 1.501 98 0 0 0 142 [4:2] 586 7 7 6 6 6 6 6 6 6 6 6 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 54 1.646 1.385 115 0 0 0 131 [4:3] 568 7 7 7 7 8 8 8 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
21 AIfDSo 54 0.329 0.317 23 1 0 0 30 [4:4] 666 2 2 2 2 2 2 2 2 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
22 AIfDSo 54 1.546 1.564 108 0 0 0 148 [4:5] 569 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 AIfDSo 54 1.847 1.522 129 0 0 0 144 [4:6] 554 8 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
24 AIfDSo 54 1.561 1.511 109 0 0 0 143 [4:7] 560 7 7 7 7 7 7 7 7 7 7 7 7 7 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up
25 AIfDSo 54 0.000 1.427 0 2238 0 2 135 [4:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 319 319 320 0 320 320 0 0 0 0 0 0 0 320 320 speed->0
26 AIfDSo 54 1.274 1.437 89 1 0 6 136 [4:9] 600 6 5 6 6 6 6 6 6 6 5 5 5 4 5 6 6 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
27 AIfDSo 54 0.000 1.448 0 2527 0 6 137 [4:A] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 316 316 316 0 316 316 315 316 316 0 speed->0
28 AIfDSo 54 1.288 1.268 90 3 0 0 120 [4:B] 616 4 5 5 5 6 5 5 6 7 7 6 6 6 6 6 5 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 1
29 AIfDSo 54 0.100 0.264 7 0 0 2 25 [4:C] 734 0 0 1 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 AIfDSo 54 0.000 0.317 0 11 0 0 30 [4:D] 741 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 speed->0
31 AIfDSo 54 1.561 1.543 109 3 0 8 146 [4:E] 587 6 6 6 8 8 8 7 5 7 7 7 7 7 7 7 6 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1
32 AIfDSo 54 0.000 0.011 0 0 0 16 1 [4:F] 750 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed->0
speed:1728 noncerate[GH/s]:15.691 (0.490/chip) hashrate[GH/s]:20.653 good:1096 errors:4997 spi-errors:1 miso-errors:159 jobs:375 (record[GH/s]:0.000)
0: 864 0.186 2.177 13 212 1 119
4: 864 15.505 18.476 1083 4785 0 40
First off I'd turn autotune off on the chips that are down aIfDSo ..and if any of the push more than 50% errors after that, lower their clock 54->53->52. |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
Aajo
Member
Offline
Activity: 94
Merit: 10
|
|
September 06, 2013, 06:59:42 PM |
|
looks like I had bad luck with h-board 1, should I try to change it to bank 2 or turn off autotuning for chip 8-16 and set them to 50?
you should swap 0 and 4. And check for tight and even seating of the h-boards. getting even worse if I change the h-boards.. I checked for soldering errors on the m-board - but nothing to see. Next I'm gonna try to populate bank 2 and 3.. First off I'd turn autotune off on the chips that are down aIfDSo ..and if any of the push more than 50% errors after that, lower their clock 54->53->52. Changing the h-boards between slots 0, 4 and 8 did not make any difference, I'm trying to switch off autotune and lower every chip to 52 now. But so far I've only got 8 from 32 chips with less than 50% errors, will try to get it to 25GH/s stable for the night. 1 AIfDSo 54 1.246 1.448 87 128 0 1 137 [0:0] 682 5 5 5 5 6 4 5 5 4 6 6 6 7 7 6 5 0 0 0 0 3 3 9 8 8 6 13 19 22 12 25 0
2 AIfDSo 54 0.086 1.469 6 87 0 0 139 [0:1] 750 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 6 6 6 6 5 5 5 5 5 5 5 5 5 6 6 6
3 AIfDSo 54 1.432 1.480 100 33 0 0 140 [0:2] 664 6 6 6 6 6 6 6 6 6 6 7 7 6 7 7 6 0 0 0 0 0 0 0 0 0 0 0 3 8 11 11 0
4 AIfDSo 54 0.301 1.363 21 9 0 0 129 [0:3] 736 1 1 1 1 1 1 1 1 2 2 2 2 1 2 1 1 0 0 0 0 0 0 0 0 2 1 1 0 0 2 3 0
5 AIfDSo 54 1.074 1.490 75 462 0 0 141 [0:4] 684 4 4 6 6 5 6 4 4 4 4 4 5 6 5 4 4 1 1 4 11 15 28 40 46 48 56 53 45 46 40 27 1
6 AIfDSo 54 1.718 1.522 120 55 0 6 144 [0:5] 646 7 8 7 7 8 8 8 8 7 8 7 7 9 7 7 7 1 0 0 0 0 4 5 5 1 6 8 6 6 7 5 1
7 AIfDSo 54 0.687 1.406 48 267 1 20 133 [0:6] 711 2 2 3 3 4 3 4 3 4 2 3 4 3 4 2 2 0 0 1 0 3 15 23 20 17 12 31 31 33 41 39 1
8 AIfDSo 54 0.558 1.279 39 17 0 17 121 [0:7] 719 2 2 2 3 3 2 2 2 3 3 3 3 2 3 2 2 2 1 1 2 1 1 1 2 1 1 0 0 1 0 1 2
9 AIfDSo 54 0.000 1.068 0 1715 1 32 101 [0:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 246 245 244 0 244 242 1 1 1 1 1 1 1 242 242
10 AIfDSo 54 0.215 0.507 15 114 0 54 48 [0:9] 744 0 1 1 1 0 1 0 0 1 2 3 1 0 2 2 0 3 5 4 3 3 3 1 7 4 20 10 14 15 0 21 1
11 AIfDSo 54 0.029 0.571 2 193 3 65 54 [0:A] 755 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 1 2 0 1 0 6 12 17 20 18 22 22 26 24 22 0
12 AIfDSo 54 0.129 0.201 9 69 0 26 19 [0:B] 750 0 0 0 0 0 2 1 1 0 0 1 1 1 0 2 0 5 4 2 3 2 2 5 7 5 3 0 6 8 8 7 2
13 AIfDSo 54 0.086 0.190 6 98 1 20 18 [0:C] 752 0 0 0 0 0 0 0 1 0 1 1 0 1 1 1 0 3 3 2 2 2 2 2 6 5 12 9 13 11 14 12 0
14 AIfDSo 54 0.129 0.454 9 44 3 2 43 [0:D] 747 1 1 0 1 0 1 0 0 1 1 0 1 0 0 1 1 2 4 1 0 0 1 0 2 3 6 6 7 6 4 2 0
15 AIfDSo 54 0.200 0.486 14 95 5 1 46 [0:E] 743 0 1 0 1 2 2 1 2 1 2 1 0 0 0 1 0 2 3 3 3 2 2 3 3 7 11 15 8 9 12 8 4
16 AIfDSo 54 0.086 0.402 6 31 3 4 38 [0:F] 750 0 0 0 0 0 0 1 1 1 0 1 1 0 0 0 1 3 0 2 1 0 0 4 1 3 2 1 3 2 4 3 2
17 AIfDSo 54 1.417 1.459 99 123 0 0 138 [4:0] 669 6 5 5 5 5 6 6 7 7 7 7 7 6 6 8 6 0 0 0 0 0 6 4 7 11 12 18 16 17 13 19 0
18 AIfDSo 54 1.460 1.522 102 388 0 0 144 [4:1] 656 6 6 6 7 7 7 6 7 7 7 7 6 5 6 6 6 0 0 6 8 10 16 29 31 36 41 43 46 40 42 40 0
19 AIfDSo 54 1.360 1.427 95 43 0 0 135 [4:2] 667 6 6 6 5 6 6 6 6 6 6 6 6 6 6 6 6 0 0 0 0 0 0 2 3 5 5 6 6 7 6 3 0
20 AIfDSo 54 1.718 1.490 120 260 0 0 141 [4:3] 667 7 7 7 7 7 7 7 6 8 8 8 9 9 7 10 6 1 3 11 11 11 11 13 19 21 22 33 37 16 34 17 0
21 AIfDSo 54 1.360 1.480 95 68 0 0 140 [4:4] 669 6 6 6 6 5 5 6 6 6 6 6 5 6 7 7 6 0 0 0 0 0 0 0 1 2 5 9 12 16 12 11 0
22 AIfDSo 54 1.618 1.437 113 250 0 0 136 [4:5] 661 6 7 7 7 7 8 8 7 7 8 7 6 7 8 7 6 0 0 8 19 14 14 25 31 25 12 14 23 19 20 26 0
23 AIfDSo 54 1.346 1.416 94 81 0 0 134 [4:6] 679 5 5 5 5 6 6 6 6 6 7 6 5 6 8 7 5 0 0 0 0 0 2 9 9 2 4 8 14 13 5 15 0
24 AIfDSo 54 1.317 1.459 92 40 0 0 138 [4:7] 673 6 6 6 5 5 5 5 5 5 6 6 5 6 7 8 6 0 0 0 0 0 0 0 0 0 1 3 11 10 4 11 0
25 AIfDSo 54 1.575 1.490 110 162 0 0 141 [4:8] 656 7 6 6 7 7 6 6 7 7 7 7 7 8 8 7 7 0 0 0 0 5 6 5 20 20 18 20 24 8 8 28 0
26 AIfDSo 54 1.661 1.469 116 88 0 0 139 [4:9] 662 7 7 7 7 7 6 7 7 8 8 7 8 8 8 8 6 4 5 2 2 3 0 4 4 8 10 9 5 9 11 12 0
27 AIfDSo 54 0.344 1.406 24 194 0 0 133 [4:A] 734 2 4 1 2 0 1 2 1 0 2 1 3 4 0 1 0 6 4 7 5 7 7 7 11 13 12 18 18 20 26 25 8
28 AIfDSo 54 1.489 1.480 104 115 0 0 140 [4:B] 666 6 6 7 5 6 6 7 7 6 7 7 7 7 6 8 6 0 0 2 5 4 3 8 10 8 9 15 13 10 13 15 0
29 AIfDSo 54 1.346 1.480 94 175 0 0 140 [4:C] 671 5 5 5 6 6 5 5 6 6 5 7 8 8 6 6 5 0 0 0 1 7 10 14 7 8 18 20 19 20 22 29 0
30 AIfDSo 54 1.546 1.490 108 126 0 0 141 [4:D] 661 6 7 7 7 7 7 6 6 7 6 7 7 8 7 7 6 0 1 3 6 8 11 10 9 9 10 10 13 11 12 13 0
31 AIfDSo 54 1.260 1.395 88 56 0 0 132 [4:E] 677 5 5 5 6 5 6 5 6 5 5 6 6 6 6 6 5 0 0 0 3 7 4 4 2 2 2 2 6 8 9 7 0
32 AIfDSo 54 1.288 1.543 90 222 0 0 146 [4:F] 677 5 5 5 5 6 6 6 6 7 7 7 5 4 5 6 5 0 0 0 0 1 8 10 9 23 25 14 21 39 41 31 0
speed:1728 noncerate[GH/s]:30.079 (0.940/chip) hashrate[GH/s]:38.780 good:2101 errors:5808 spi-errors:17 miso-errors:248 jobs:373 (record[GH/s]:0.000)
0: 864 7.974 15.337 557 3417 17 248
4: 864 22.105 23.443 1544 2391 0 0
|
|
|
|
|
|
jlsminingcorp
|
|
September 06, 2013, 07:23:43 PM
Last edit: September 06, 2013, 08:29:48 PM by jlsminingcorp |
|
What would be awesome is if someone whipped up a script that can collect larger samples of data by picking up each individual 5 min log and compiling them in to a longer one with averages. I'd personally prefer a one that shows info on every single chip.
Hi Isokivi, I'd be happy to give this a go over the weekend (we do a reasonable amount of parsing of text files in bash, so it should be straightforward). However, we don't have any bitfury hardware yet (October can't come round soon enough  ), so would need some sample log files and some info on the file locations etc. Let me know if you're interested - somebody else may have done it already of course and may be able to share more quickly. The file we want is /run/smh/.stat.log This is what they look like: http://pastebin.com/xN7t9WaHPlease note that: pastebin screws up the line lenght, all the info regarding a single chip is actually on one line. And secondly, this is a sample of that has two h-boards, the maximum is sixteen. Let me know if theres something else I can help with. [edit] btw since theres propably no nice way to time the data collection exactly when the new logs are generated (or perhaps there is, Im out of familiar waters here) I would suggest that you have the script pick up data every 330 seconds (5min 30 sec). Hi Isokivi, could you give this a try to see if it's broadly what you're after (at least until a more elegant solution is coded into chainminer)? It's not pretty, but I think that it should work. It's just set up to grab board stats at the moment, but can be modified to grab chip-level stats if required in a later version. There may be bugs when trying to grab data from the real system, so it may need tweaking. I've set the sleep time to 120 seconds, as 330 seconds would miss some data after some time I think (unless I'm miscalculating - It's late  ). #!/bin/bash
# Bitfury chainminer logfile consolidation script
# Jlsminingcorp, September 2013
# Version 1.0
logfile="/run/shm/.stat.log"
output="./boards.log"
datestamp=$(ls --full-time "$logfile" | awk '{print $6}')
timestamp=$(ls --full-time "$logfile" | awk '{print $7}' | awk -F"." '{print $1}')
# If log file or output file don't exist then take appropriate action
if [ ! -e "$logfile" ]; then
echo "$datestamp","$timestamp""Logfile does not exist in the specified location" >> "$output"
exit 1
fi
if [ ! -e "$output" ]; then
echo "Date,Time,Board Position,Speed,Noncerate [GH/s],Hashrate [GH/s],Good,Errors,SPI-Errors,Miso-Errors" > "$output"
fi
# If timestamp in the log file is the same as the timestamp on the last entry in the output file then sleep for a while
prevtimestamp=$(tail -n 1 "$output" | awk -F"," '{print $2}')
while [ "$timestamp" == "$prevtimestamp" ]; do
sleep 120
timestamp=$(ls --full-time "$logfile" | awk '{print $7}' | awk -F"." '{print $1}')
done
# When there's new data in the log file strip this out and copy to the output file
IFS=$'\r\n' datalines=($(grep '.: ' "$logfile"))
count=0
while [ $count -lt ${#datalines[@]} ]; do
data=$(echo "${datalines["$count"]}")
eddata=($(echo $data | tr ":" " "))
data_array=($(echo $eddata | tr " " "\n"))
echo -ne "$datestamp","$timestamp" >> "$output"
for i in "${data_array[@]}"; do
echo -ne ,"$i" >> "$output"
done
echo "" >> "$output"
let count=count+1
done
exit 0
|
|
|
|
|
Isokivi
|
|
September 06, 2013, 07:34:00 PM
Last edit: September 06, 2013, 07:59:18 PM by Isokivi |
|
Apparrently I sneaked a typo in to the filepath, the code below has that fixed:What would be awesome is if someone whipped up a script that can collect larger samples of data by picking up each individual 5 min log and compiling them in to a longer one with averages. I'd personally prefer a one that shows info on every single chip.
Hi Isokivi, I'd be happy to give this a go over the weekend (we do a reasonable amount of parsing of text files in bash, so it should be straightforward). However, we don't have any bitfury hardware yet (October can't come round soon enough ), so would need some sample log files and some info on the file locations etc. Let me know if you're interested - somebody else may have done it already of course and may be able to share more quickly. The file we want is /run/smh/.stat.log This is what they look like: http://pastebin.com/xN7t9WaHPlease note that: pastebin screws up the line lenght, all the info regarding a single chip is actually on one line. And secondly, this is a sample of that has two h-boards, the maximum is sixteen. Let me know if theres something else I can help with. [edit] btw since theres propably no nice way to time the data collection exactly when the new logs are generated (or perhaps there is, Im out of familiar waters here) I would suggest that you have the script pick up data every 330 seconds (5min 30 sec). Hi Isokivi, could you give this a try to see if it's broadly what you're after (at least until a more elegant solution is coded into chainminer)? It's not pretty, but I think that it should work. It's just set up to grab board stats at the moment, but can be modified to grab chip-level stats if required in a later version. There may be bugs when trying to grab data from the real system, so it may need tweaking. I've set the sleep time to 120 seconds, as 330 seconds would miss some data after some time I think (unless I'm miscalculating - It's late ). #!/bin/bash
# Bitfury chainminer logfile consolidation script
# Jlsminingcorp, September 2013
# Version 1.0
logfile="/run/shm/.stat.log"
output="./boards.log"
datestamp=$(ls --full-time "$logfile" | awk '{print $6}')
timestamp=$(ls --full-time "$logfile" | awk '{print $7}' | awk -F"." '{print $1}')
# If log file or output file don't exist then take appropriate action
if [ ! -e "$logfile" ]; then
echo "$datestamp","$timestamp""Logfile does not exist in the specified location" >> "$output"
exit 1
fi
if [ ! -e "$output" ]; then
echo "Date,Time,Board Position,Speed,Noncerate [GH/s],Hashrate [GH/s],Good,Errors,SPI-Errors,Miso-Errors" > "$output"
fi
# If timestamp in the log file is the same as the timestamp on the last entry in the output file then sleep for a while
prevtimestamp=$(tail -n 1 "$output" | awk -F"," '{print $2}')
while [ "$timestamp" == "$prevtimestamp" ]; do
sleep 120
timestamp=$(ls --full-time "$logfile" | awk '{print $7}' | awk -F"." '{print $1}')
done
# When there's new data in the log file strip this out and copy to the output file
IFS=$'\r\n' datalines=($(grep '.: ' "$logfile"))
count=0
while [ $count -lt ${#datalines[@]} ]; do
data=$(echo "${datalines["$count"]}")
eddata=($(echo $data | tr ":" " "))
data_array=($(echo $eddata | tr " " "\n"))
echo -ne "$datestamp","$timestamp" >> "$output"
for i in "${data_array[@]}"; do
echo -ne ,"$i" >> "$output"
done
echo "" >> "$output"
let count=count+1
done
exit 0
I'd love to. But sadly I have to admit I do need instructions to do it  Helpful people on irc got me running it, will report back later when it's gathered some data. |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
|
jlsminingcorp
|
|
September 06, 2013, 08:11:44 PM |
|
I'd love to. But sadly I have to admit I do need instructions to do it Helpful people on irc got me running it, will report back later when it's gathered some data. Sorry about that, I was offline for a bit, otherwise I'd have sent some suggestions. Thanks to the irc people ! |
|
|
|
|
Isokivi
|
|
September 06, 2013, 08:14:14 PM |
|
I'd love to. But sadly I have to admit I do need instructions to do it Helpful people on irc got me running it, will report back later when it's gathered some data. Sorry about that, I was offline for a bit, otherwise I'd have sent some suggestions. Thanks to the irc people ! less boards.log produces: ",Logfile does not exist in the specified location" I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it. |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
|
jlsminingcorp
|
|
September 06, 2013, 08:22:50 PM |
|
less boards.log produces: ",Logfile does not exist in the specified location"
I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it.
Looks like the script is not finding the chainminer log file. Could you type "ls -l /run/shm" and let me know the result? |
|
|
|
|
jlsminingcorp
|
|
September 06, 2013, 08:24:21 PM |
|
less boards.log produces: ",Logfile does not exist in the specified location"
I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it.
Looks like the script is not finding the chainminer log file. Could you type "ls -l /run/shm" and let me know the result? Oops, I mean "ls -la /run/shm". |
|
|
|
|
Isokivi
|
|
September 06, 2013, 08:29:41 PM |
|
less boards.log produces: ",Logfile does not exist in the specified location"
I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it.
Looks like the script is not finding the chainminer log file. Could you type "ls -l /run/shm" and let me know the result? Oops, I mean "ls -la /run/shm". total 16 drwxrwxrwt 2 root root 140 Sep 2 08:28 . drwxr-xr-x 14 root root 580 Sep 3 14:50 .. -rw-r--r-- 1 root root 3891 Sep 5 08:35 .chip.cnf -rw-r--r-- 1 root root 116 Sep 6 20:29 .putstat.log -rw-r--r-- 1 root root 470 Sep 6 20:25 stat.json -rw-r--r-- 1 root root 3835 Sep 6 20:25 .stat.log -rw-r--r-- 1 root root 0 Aug 30 17:17 .tmpfs |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
|
jlsminingcorp
|
|
September 06, 2013, 08:34:15 PM |
|
less boards.log produces: ",Logfile does not exist in the specified location"
I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it.
Looks like the script is not finding the chainminer log file. Could you type "ls -l /run/shm" and let me know the result? Oops, I mean "ls -la /run/shm". total 16 drwxrwxrwt 2 root root 140 Sep 2 08:28 . drwxr-xr-x 14 root root 580 Sep 3 14:50 .. -rw-r--r-- 1 root root 3891 Sep 5 08:35 .chip.cnf -rw-r--r-- 1 root root 116 Sep 6 20:29 .putstat.log -rw-r--r-- 1 root root 470 Sep 6 20:25 stat.json -rw-r--r-- 1 root root 3835 Sep 6 20:25 .stat.log -rw-r--r-- 1 root root 0 Aug 30 17:17 .tmpfs Spotted it. There's a typo on line 6. It should read: logfile="/run/shm/.stat.log" I've updated the post above. If you edit the script and give it a try it may be ok this time (fingers crossed). |
|
|
|
|
Isokivi
|
|
September 06, 2013, 08:40:52 PM |
|
less boards.log produces: ",Logfile does not exist in the specified location"
I have placed the .sh file containing the script on to /tmp and did chmod +x on it, then ran it.
Looks like the script is not finding the chainminer log file. Could you type "ls -l /run/shm" and let me know the result? Oops, I mean "ls -la /run/shm". total 16 drwxrwxrwt 2 root root 140 Sep 2 08:28 . drwxr-xr-x 14 root root 580 Sep 3 14:50 .. -rw-r--r-- 1 root root 3891 Sep 5 08:35 .chip.cnf -rw-r--r-- 1 root root 116 Sep 6 20:29 .putstat.log -rw-r--r-- 1 root root 470 Sep 6 20:25 stat.json -rw-r--r-- 1 root root 3835 Sep 6 20:25 .stat.log -rw-r--r-- 1 root root 0 Aug 30 17:17 .tmpfs Spotted it. There's a typo on line 6. It should read: logfile="/run/shm/.stat.log" I've updated the post above. If you edit the script and give it a try it may be ok this time (fingers crossed). I allready caught that (see big bold text a cuple of posts ago) XD [edit] and the mistake was mine when giving you the path |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
|
jlsminingcorp
|
|
September 06, 2013, 09:09:09 PM |
|
I allready caught that (see big bold text a cuple of posts ago) XD
[edit] and the mistake was mine when giving you the path
I see, missed that! I'll have to take another look at this tomorrow. I'm not sure what's wrong (and I've just spotted a problem with the sleep timer that needs fixing too). Will get back to you. |
|
|
|
Aajo
Member
Offline
Activity: 94
Merit: 10
|
|
September 06, 2013, 10:18:54 PM |
|
looks like I had bad luck with h-board 1, should I try to change it to bank 2 or turn off autotuning for chip 8-16 and set them to 50?
you should swap 0 and 4. And check for tight and even seating of the h-boards. getting even worse if I change the h-boards.. I checked for soldering errors on the m-board - but nothing to see. Next I'm gonna try to populate bank 2 and 3.. First off I'd turn autotune off on the chips that are down aIfDSo ..and if any of the push more than 50% errors after that, lower their clock 54->53->52. Changing the h-boards between slots 0, 4 and 8 did not make any difference, I'm trying to switch off autotune and lower every chip to 52 now. But so far I've only got 8 from 32 chips with less than 50% errors, will try to get it to 25GH/s stable for the night. autotune off and every chip to 52 gave me ~18 GH/s turning the error chips to 0 and increasing the speed of the remaining 14 chips gets me between 19 and 24 GH/s, any idea on how to get those 18 chips working is appreciated this is my best .stat.log so far: 1 aIfDSo 56 1.689 1.712 118 6 0 0 162 [0:0] 561 8 7 8 7 6 6 7 8 7 8 8 7 8 8 7 8 0 1 0 0 1 1 0 0 1 0 0 1 0 0 1 0
2 aIfDSo 54 1.317 1.490 92 0 0 0 141 [0:1] 602 6 6 6 6 6 6 6 5 5 5 5 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 aIfDSo 55 1.489 1.628 104 0 0 0 154 [0:2] 575 7 7 7 6 6 6 6 6 6 6 6 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 aIfDSo 55 1.475 1.490 103 1 0 0 141 [0:3] 582 7 7 6 5 6 6 6 6 6 6 7 7 7 7 7 7 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
5 aIfDSo 54 0.286 0.317 20 0 0 0 30 [0:4] 692 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 aIfDSo 56 1.475 1.850 103 11 0 2 175 [0:5] 573 6 8 8 7 6 4 6 6 7 5 6 7 7 6 7 7 1 0 0 1 1 2 1 1 0 2 1 0 0 1 0 0
7 aIfDSo 54 1.246 1.416 87 2 1 18 134 [0:6] 608 6 4 5 5 5 4 4 6 6 6 6 6 6 6 6 6 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0
8 aIfDSo 0 1.074 1.163 75 6 0 19 110 [0:7] 638 5 4 4 4 4 4 4 4 5 5 5 5 5 5 6 6 0 1 0 1 2 2 0 0 0 0 0 0 0 0 0 0
9 aIfDSo 0 0.000 0.021 0 8 1 40 2 [0:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 1 0 0 0 0 0 0 0 0 2 1 1 1
10 aIfDSo 0 0.000 1.194 0 24 0 32 113 [0:9] 755 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 1 1 3 2 2 1 1 0 2 1 0
11 aIfDSo 0 0.000 0.772 0 30 2 43 73 [0:A] 754 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 1 1 3 1 2 3 2 1 4 3 2 1 1 0 2
12 aIfDSo 0 0.000 0.729 0 50 3 8 69 [0:B] 752 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 3 3 6 6 5 4 2 2 2 3 2 2 2 1 2
13 aIfDSo 0 0.000 0.634 0 40 1 36 60 [0:C] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 5 3 2 1 2 3 2 1 4 3 3 3 2 3
14 aIfDSo 0 0.000 0.042 0 10 1 5 4 [0:D] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 2 2 1 0 0 0 0 1 0 0 1 0 0
15 aIfDSo 0 0.000 0.085 0 29 1 6 8 [0:E] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 1 2 2 2 2 3 2 1 1 3 2 1 1 2 1
16 aIfDSo 0 0.000 0.497 0 16 0 11 47 [0:F] 753 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 2 1 1 0 2 1 0 1 1 1 0 1 1 0 0
17 aIfDSo 55 1.689 1.596 118 0 0 0 151 [4:0] 561 7 7 7 7 7 7 7 7 8 8 8 8 8 8 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
18 aIfDSo 55 1.489 1.681 104 1 0 0 159 [4:1] 556 7 7 7 7 6 7 7 7 7 6 6 6 6 6 6 6 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
19 aIfDSo 56 1.646 1.744 115 11 0 0 165 [4:2] 556 7 8 8 8 8 4 5 8 5 8 8 8 7 7 8 8 1 0 0 0 0 3 2 0 3 0 0 0 1 1 0 0
20 aIfDSo 55 1.861 1.670 130 0 0 0 158 [4:3] 548 8 8 8 8 8 8 9 9 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
21 aIfDSo 55 1.503 1.649 105 0 0 0 156 [4:4] 558 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
22 aIfDSo 55 1.417 1.596 99 0 0 0 151 [4:5] 578 6 6 6 6 7 7 7 6 6 6 6 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 aIfDSo 55 1.632 1.575 114 0 0 0 149 [4:6] 563 7 7 7 7 7 7 7 8 8 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 aIfDSo 0 0.243 0.317 17 0 0 0 30 [4:7] 715 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
25 aIfDSo 0 0.401 0.317 28 0 0 0 30 [4:8] 705 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
26 aIfDSo 0 0.301 0.317 21 0 0 0 30 [4:9] 720 1 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
27 aIfDSo 0 0.086 0.307 6 19 0 0 29 [4:A] 743 0 0 0 1 0 0 0 1 0 0 1 1 0 1 1 0 1 1 1 1 2 2 2 1 2 2 1 1 1 0 0 1
28 aIfDSo 0 0.315 0.328 22 0 0 0 31 [4:B] 704 1 1 2 2 2 2 2 2 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
29 aIfDSo 0 0.401 0.317 28 0 0 0 30 [4:C] 709 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 aIfDSo 0 0.329 0.317 23 0 0 0 30 [4:D] 709 1 1 2 2 2 2 2 2 2 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 aIfDSo 0 0.229 0.307 16 3 1 0 29 [4:E] 721 1 0 0 0 1 2 2 2 1 1 1 1 1 1 1 1 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
32 aIfDSo 0 0.329 0.338 23 0 0 0 32 [4:F] 714 2 2 2 2 1 1 1 1 1 1 1 1 1 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:770 noncerate[GH/s]:23.923 (0.748/chip) hashrate[GH/s]:29.415 good:1671 errors:267 spi-errors:11 miso-errors:220 jobs:376 (record[GH/s]:0.000)
0: 384 10.050 15.041 702 233 10 220
4: 386 13.873 14.375 969 34 1 0 |
|
|
|
|
|
Isokivi
|
|
September 06, 2013, 10:43:45 PM |
|
autotune off and every chip to 52 gave me ~18 GH/s turning the error chips to 0 and increasing the speed of the remaining 14 chips gets me between 19 and 24 GH/s, any idea on how to get those 18 chips working is appreciated this is my best .stat.log so far: 1 aIfDSo 56 1.689 1.712 118 6 0 0 162 [0:0] 561 8 7 8 7 6 6 7 8 7 8 8 7 8 8 7 8 0 1 0 0 1 1 0 0 1 0 0 1 0 0 1 0
2 aIfDSo 54 1.317 1.490 92 0 0 0 141 [0:1] 602 6 6 6 6 6 6 6 5 5 5 5 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 aIfDSo 55 1.489 1.628 104 0 0 0 154 [0:2] 575 7 7 7 6 6 6 6 6 6 6 6 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 aIfDSo 55 1.475 1.490 103 1 0 0 141 [0:3] 582 7 7 6 5 6 6 6 6 6 6 7 7 7 7 7 7 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
5 aIfDSo 54 0.286 0.317 20 0 0 0 30 [0:4] 692 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 aIfDSo 56 1.475 1.850 103 11 0 2 175 [0:5] 573 6 8 8 7 6 4 6 6 7 5 6 7 7 6 7 7 1 0 0 1 1 2 1 1 0 2 1 0 0 1 0 0
7 aIfDSo 54 1.246 1.416 87 2 1 18 134 [0:6] 608 6 4 5 5 5 4 4 6 6 6 6 6 6 6 6 6 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0
8 aIfDSo 0 1.074 1.163 75 6 0 19 110 [0:7] 638 5 4 4 4 4 4 4 4 5 5 5 5 5 5 6 6 0 1 0 1 2 2 0 0 0 0 0 0 0 0 0 0
9 aIfDSo 0 0.000 0.021 0 8 1 40 2 [0:8] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 1 0 0 0 0 0 0 0 0 2 1 1 1
10 aIfDSo 0 0.000 1.194 0 24 0 32 113 [0:9] 755 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 1 1 3 2 2 1 1 0 2 1 0
11 aIfDSo 0 0.000 0.772 0 30 2 43 73 [0:A] 754 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 1 1 3 1 2 3 2 1 4 3 2 1 1 0 2
12 aIfDSo 0 0.000 0.729 0 50 3 8 69 [0:B] 752 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 3 3 6 6 5 4 2 2 2 3 2 2 2 1 2
13 aIfDSo 0 0.000 0.634 0 40 1 36 60 [0:C] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 5 3 2 1 2 3 2 1 4 3 3 3 2 3
14 aIfDSo 0 0.000 0.042 0 10 1 5 4 [0:D] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 2 2 1 0 0 0 0 1 0 0 1 0 0
15 aIfDSo 0 0.000 0.085 0 29 1 6 8 [0:E] 756 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 1 2 2 2 2 3 2 1 1 3 2 1 1 2 1
16 aIfDSo 0 0.000 0.497 0 16 0 11 47 [0:F] 753 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 2 1 1 0 2 1 0 1 1 1 0 1 1 0 0
17 aIfDSo 55 1.689 1.596 118 0 0 0 151 [4:0] 561 7 7 7 7 7 7 7 7 8 8 8 8 8 8 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
18 aIfDSo 55 1.489 1.681 104 1 0 0 159 [4:1] 556 7 7 7 7 6 7 7 7 7 6 6 6 6 6 6 6 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
19 aIfDSo 56 1.646 1.744 115 11 0 0 165 [4:2] 556 7 8 8 8 8 4 5 8 5 8 8 8 7 7 8 8 1 0 0 0 0 3 2 0 3 0 0 0 1 1 0 0
20 aIfDSo 55 1.861 1.670 130 0 0 0 158 [4:3] 548 8 8 8 8 8 8 9 9 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
21 aIfDSo 55 1.503 1.649 105 0 0 0 156 [4:4] 558 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
22 aIfDSo 55 1.417 1.596 99 0 0 0 151 [4:5] 578 6 6 6 6 7 7 7 6 6 6 6 6 6 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 aIfDSo 55 1.632 1.575 114 0 0 0 149 [4:6] 563 7 7 7 7 7 7 7 8 8 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 aIfDSo 0 0.243 0.317 17 0 0 0 30 [4:7] 715 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
25 aIfDSo 0 0.401 0.317 28 0 0 0 30 [4:8] 705 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
26 aIfDSo 0 0.301 0.317 21 0 0 0 30 [4:9] 720 1 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
27 aIfDSo 0 0.086 0.307 6 19 0 0 29 [4:A] 743 0 0 0 1 0 0 0 1 0 0 1 1 0 1 1 0 1 1 1 1 2 2 2 1 2 2 1 1 1 0 0 1
28 aIfDSo 0 0.315 0.328 22 0 0 0 31 [4:B] 704 1 1 2 2 2 2 2 2 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
29 aIfDSo 0 0.401 0.317 28 0 0 0 30 [4:C] 709 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 aIfDSo 0 0.329 0.317 23 0 0 0 30 [4:D] 709 1 1 2 2 2 2 2 2 2 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 aIfDSo 0 0.229 0.307 16 3 1 0 29 [4:E] 721 1 0 0 0 1 2 2 2 1 1 1 1 1 1 1 1 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
32 aIfDSo 0 0.329 0.338 23 0 0 0 32 [4:F] 714 2 2 2 2 1 1 1 1 1 1 1 1 1 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:770 noncerate[GH/s]:23.923 (0.748/chip) hashrate[GH/s]:29.415 good:1671 errors:267 spi-errors:11 miso-errors:220 jobs:376 (record[GH/s]:0.000)
0: 384 10.050 15.041 702 233 10 220
4: 386 13.873 14.375 969 34 1 0 Did you try putting 52 on the zero chips too ? |
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins. |
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
September 07, 2013, 01:44:59 AM
Last edit: September 07, 2013, 05:04:55 AM by goxed |
|
I have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash. 1 AIfDSo 55 0.813 1.543 14 26 0 1 36 [0:0] 743 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 0 0 0 0 0 0 2 4 4 3 2 6 5 0
2 AIfDSo 55 1.045 1.457 18 164 0 0 34 [0:1] 738 1 1 1 1 1 1 1 2 2 2 2 0 0 1 1 1 0 0 0 0 0 0 0 5 11 13 14 26 30 32 33 0
3 AIfDSo 55 1.277 1.457 22 76 0 0 34 [0:2] 738 1 1 1 1 1 1 1 2 2 3 1 1 2 1 2 1 0 0 0 0 0 0 0 6 1 10 8 12 12 14 13 0
4 AIfDSo 55 1.973 1.585 34 187 0 0 37 [0:3] 722 2 2 2 3 3 3 2 2 2 2 2 2 1 2 2 2 0 0 0 4 5 9 13 14 14 15 17 22 24 25 25 0
5 AIfDSo 55 1.625 1.500 28 68 0 0 35 [0:4] 730 2 1 1 1 1 1 2 2 2 2 2 3 2 2 2 2 0 0 0 0 0 0 1 1 2 5 10 11 8 14 16 0
6 AIfDSo 55 1.625 1.500 28 75 0 0 35 [0:5] 736 1 1 1 1 2 2 2 3 2 3 2 1 2 3 1 1 0 0 0 0 0 4 4 2 7 5 3 12 7 11 20 0
7 AIfDSo 55 1.335 1.500 23 58 0 0 35 [0:6] 737 1 1 2 2 2 0 1 2 2 2 1 2 1 2 1 1 0 0 0 1 0 0 6 2 6 2 7 7 12 7 8 0
8 AIfDSo 55 1.799 1.585 31 87 0 0 37 [0:7] 731 2 2 1 0 1 2 2 2 2 2 3 1 3 3 3 2 0 0 0 1 0 6 6 8 3 10 9 13 7 12 12 0
9 AIfDSo 55 1.625 1.628 28 88 0 0 38 [0:8] 735 1 1 1 1 2 2 3 2 2 3 1 2 2 2 2 1 0 0 0 0 0 3 5 4 12 9 13 7 10 12 13 0
10 AIfDSo 55 0.871 1.500 15 55 0 0 35 [0:9] 743 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 0 0 0 0 2 8 6 7 11 12 8 0
11 AIfDSo 55 2.031 1.585 35 6 0 0 37 [0:A] 726 2 2 2 2 2 2 1 2 2 3 2 3 3 2 3 2 0 0 0 0 0 0 1 0 0 0 0 1 2 1 1 0
12 AIfDSo 55 0.290 1.585 5 32 0 0 37 [0:B] 751 0 1 0 0 0 1 0 0 0 1 1 0 0 0 0 1 2 1 2 2 2 1 2 2 2 1 1 1 3 4 4 2
13 AIfDSo 55 0.929 1.500 16 61 0 0 35 [0:C] 740 1 0 0 0 1 1 1 1 2 1 2 2 2 0 1 1 0 1 1 1 0 0 0 0 2 4 9 10 10 11 12 0
14 AIfDSo 55 1.045 1.500 18 103 0 0 35 [0:D] 739 2 1 2 2 2 1 0 0 1 0 0 1 1 3 0 2 0 1 0 1 2 3 5 6 11 12 14 14 11 12 11 0
15 AIfDSo 55 0.987 1.414 17 117 0 0 33 [0:E] 742 1 1 1 1 1 1 1 1 1 0 1 0 2 1 3 1 0 0 0 0 0 1 2 4 14 15 12 7 19 26 17 0
16 AIfDSo 55 1.567 1.628 27 34 0 0 38 [0:F] 730 2 2 2 2 2 2 1 0 1 2 1 2 2 2 3 1 0 0 0 0 0 0 0 1 0 1 6 6 4 7 8 1
17 AIfDSo 55 2.089 1.928 36 26 0 0 45 [1:0] 721 2 2 2 2 2 2 2 2 2 3 3 3 1 3 3 2 0 0 0 0 0 0 0 0 1 0 5 5 8 4 3 0
18 AIfDSo 55 1.683 1.928 29 3 0 0 45 [1:1] 728 2 2 2 2 2 2 1 2 2 2 2 2 1 2 2 1 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 1
19 AIfDSo 55 1.625 1.843 28 10 0 0 43 [1:2] 728 2 2 2 2 2 2 2 1 1 2 2 1 2 1 2 2 0 0 0 0 0 0 0 0 0 0 1 2 1 3 3 0
20 AIfDSo 55 2.089 1.714 36 64 0 0 40 [1:3] 729 2 2 2 2 2 2 1 2 2 3 3 2 3 2 4 2 0 0 0 0 0 0 0 3 1 6 10 6 14 15 9 0
21 AIfDSo 55 0.929 1.757 16 60 0 0 41 [1:4] 740 1 1 1 0 1 1 0 1 1 2 2 0 1 1 1 2 0 0 0 1 0 0 1 0 0 3 5 11 11 14 14 0
22 AIfDSo 55 1.103 1.843 19 103 0 0 43 [1:5] 738 1 1 1 1 1 1 2 2 1 1 2 1 1 0 2 1 0 0 0 0 0 0 6 6 8 9 11 15 11 19 18 0
23 AIfDSo 55 1.161 1.928 20 78 0 0 45 [1:6] 737 1 1 1 1 1 2 2 2 1 1 1 1 1 1 2 1 0 0 0 0 0 0 0 1 3 5 10 10 14 18 17 0
24 AIfDSo 55 1.393 1.885 24 2 0 0 44 [1:7] 732 2 2 2 2 1 1 1 1 1 1 2 1 2 1 2 2 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0
25 AIfDSo 55 2.147 1.885 37 50 0 0 44 [1:8] 722 2 2 2 1 2 1 3 3 2 2 4 3 2 3 3 2 0 0 0 1 0 1 4 2 1 2 7 7 7 8 10 0
26 AIfDSo 55 1.683 1.885 29 37 0 0 44 [1:9] 733 1 1 1 1 1 1 2 2 2 2 2 3 4 3 2 1 0 0 0 0 0 0 3 0 5 3 6 1 8 6 4 1
27 AIfDSo 55 2.380 1.843 41 82 0 0 43 [1:A] 724 2 2 2 3 2 3 4 4 3 2 1 3 3 2 3 2 0 0 0 0 4 5 4 5 7 8 8 10 10 11 10 0
28 AIfDSo 55 1.335 1.843 23 12 0 0 43 [1:B] 733 2 2 2 1 1 1 1 1 1 1 1 2 2 1 2 2 0 0 0 0 0 0 0 0 0 0 3 2 3 2 1 1
29 AIfDSo 55 1.625 1.843 28 42 0 0 43 [1:C] 733 1 1 1 1 0 1 1 2 2 2 2 2 3 3 4 2 1 0 0 0 1 0 0 0 2 4 8 9 5 4 8 0
30 AIfDSo 55 2.206 1.928 38 19 0 0 45 [1:D] 720 2 2 1 2 2 2 2 2 2 3 3 3 3 3 3 3 0 0 1 0 0 0 0 0 0 6 1 6 2 2 1 0
31 AIfDSo 55 1.683 1.885 29 182 0 0 44 [1:E] 729 2 2 2 2 1 2 2 1 1 2 2 1 2 2 3 2 0 0 0 0 0 10 10 12 17 20 21 15 26 27 23 1
32 AIfDSo 55 2.670 1.885 46 110 0 0 44 [1:F] 715 2 2 2 3 3 3 3 3 3 3 3 3 4 4 3 2 0 0 0 3 4 4 7 9 9 7 12 14 14 13 14 0
33 AIfDSo 55 1.451 1.628 25 64 0 0 38 [2:0] 734 1 1 1 1 1 1 2 2 2 3 2 2 2 1 2 1 0 0 0 0 0 0 0 1 2 8 6 14 12 13 8 0
34 AIfDSo 55 1.393 1.671 24 84 0 0 39 [2:1] 733 1 1 1 1 1 2 2 2 2 2 2 1 2 2 1 1 0 0 0 0 4 4 7 4 3 1 2 3 15 19 22 0
35 AIfDSo 55 1.161 1.457 20 158 0 0 34 [2:2] 745 1 1 1 0 0 0 1 1 1 2 2 2 2 2 3 1 0 0 0 0 0 5 18 18 7 10 26 19 24 17 14 0
speed:1925 noncerate[GH/s]:52.642 (1.504/chip) hashrate[GH/s]:59.047 good:907 errors:2423 spi-err:0 miso-err:1 jobs:90 cores:3% good:35 bad:0 off:0 (best[GH/s]:0.000) Sat Sep 7 04:51:21 2013
0: 880 20.836 24.467 359 1237 0 1 16 0 0 (1.302/chip) 3%
1: 880 27.801 29.824 479 880 0 0 16 0 0 (1.738/chip) 4%
2: 165 4.005 4.756 69 306 0 0 3 0 0 (1.335/chip) 2%
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
September 07, 2013, 05:01:36 AM |
|
Okay problem solved. Inferring that the problem chips be disabled as per cscape's suggestion I cut the SPI traces of 4th and 5th chips using a knife and shorted the jumpers using thin copper wire. Here are the results. The board now uses 14chips for hashing. https://i.imgur.com/v3HhER8.jpg[/img]] 1 AIfDSo 55 1.575 1.638 110 1 0 0 155 [0:0] 220 7 7 7 7 7 7 7 7 6 7 7 7 7 7 6 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
2 AIfDSo 55 1.603 1.522 112 2 0 0 144 [0:1] 215 8 7 7 7 7 7 6 7 6 7 7 7 7 7 7 8 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0
3 AIfDSo 55 1.274 1.501 89 4 0 0 142 [0:2] 257 6 5 6 6 6 6 4 6 6 6 6 5 5 5 5 6 0 1 0 0 0 0 2 0 0 0 0 1 0 0 0 0
4 AIfDSo 55 1.603 1.659 112 3 0 0 157 [0:3] 180 6 7 6 6 7 7 7 7 7 8 8 8 7 7 7 7 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0
5 AIfDSo 55 1.804 1.596 126 2 0 0 151 [0:4] 214 8 8 8 8 7 8 8 8 8 8 8 8 8 8 7 8 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0
6 AIfDSo 55 1.546 1.575 108 4 0 0 149 [0:5] 209 7 7 6 6 7 7 7 6 7 7 7 7 7 6 7 7 0 0 1 1 0 0 0 1 0 0 0 0 0 1 0 0
7 AIfDSo 55 1.417 1.564 99 1 0 0 148 [0:6] 254 6 6 6 7 7 7 7 6 6 6 6 6 6 6 6 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 AIfDSo 55 1.532 1.659 107 4 0 0 157 [0:7] 214 7 7 7 6 7 7 7 7 7 7 6 6 7 7 6 6 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1
9 AIfDSo 55 1.904 1.691 133 5 0 0 160 [0:8] 181 8 8 7 9 8 9 9 9 9 9 9 9 8 7 8 7 0 0 1 0 1 0 0 0 0 0 0 0 1 1 0 1
10 AIfDSo 55 1.589 1.564 111 2 0 0 148 [0:9] 237 7 7 7 7 7 7 6 7 7 7 7 7 7 8 6 7 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0
11 AIfDSo 55 1.346 1.659 94 1 0 0 157 [0:A] 213 6 6 5 6 6 6 6 6 6 6 6 6 5 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
12 AiFDso 55 0.043 0.444 3 24 0 0 42 [0:B] 713 0 0 0 1 1 0 0 0 0 0 0 0 1 0 0 0 2 2 2 1 1 2 2 1 1 1 1 1 1 2 2 2
13 AIfDSo 55 1.675 1.564 117 2 0 0 148 [0:C] 210 7 7 7 6 7 7 8 8 8 8 8 8 8 7 7 6 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1
14 AIfDSo 55 1.016 1.575 71 37 0 0 149 [0:D] 412 4 5 6 2 3 6 4 5 4 7 5 3 3 4 5 5 3 2 1 4 3 0 2 2 3 0 2 4 4 3 2 2
15 AIfDSo 55 1.532 1.480 107 4 0 0 140 [0:E] 216 7 7 7 7 6 6 7 7 6 7 7 7 7 7 5 7 0 0 0 0 1 1 0 0 1 0 0 0 0 0 1 0
16 AIfDSo 55 1.890 1.723 132 3 0 0 163 [0:F] 174 9 8 9 9 9 8 8 8 8 8 8 8 8 7 8 9 0 1 0 0 0 1 0 0 0 0 0 0 0 1 0 0
17 AIfDSo 55 2.062 1.998 144 6 0 0 189 [1:0] 153 8 9 8 8 9 9 8 9 9 9 10 9 10 10 9 10 1 0 1 1 0 0 1 0 0 0 0 1 0 0 1 0
18 AIfDSo 55 1.990 2.029 139 2 0 0 192 [1:1] 148 8 8 8 8 9 9 9 9 9 9 9 9 9 9 8 9 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
19 AIfDSo 55 1.747 1.913 122 5 0 0 181 [1:2] 195 8 8 7 8 7 7 7 8 8 8 8 8 8 8 8 6 0 0 1 0 0 1 1 0 0 0 0 0 0 0 0 2
20 AIfDSo 55 1.389 1.807 97 14 0 0 171 [1:3] 215 6 7 7 7 6 7 6 7 6 6 4 3 6 7 6 6 1 0 0 0 1 0 1 0 1 1 3 4 1 0 0 1
21 AIfDSo 55 1.231 1.839 86 41 0 0 174 [1:4] 396 5 5 6 4 5 4 7 4 6 6 6 8 5 5 4 6 3 3 2 4 3 4 1 3 2 2 2 0 3 3 4 2
22 AIfDSo 55 1.847 1.945 129 4 0 0 184 [1:5] 154 8 7 8 8 7 8 7 9 9 9 9 9 8 8 7 8 0 1 0 0 1 0 1 0 0 0 0 0 0 0 1 0
23 AIfDSo 55 1.990 2.008 139 7 0 0 190 [1:6] 156 9 9 8 8 9 10 9 9 9 9 9 8 8 8 8 9 0 0 1 1 1 0 0 0 0 0 0 1 1 1 1 0
24 AIfDSo 55 1.704 1.977 119 1 0 0 187 [1:7] 152 8 8 8 7 8 8 7 7 7 7 7 7 7 7 8 8 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
25 AIfDSo 55 1.875 1.955 131 21 0 0 185 [1:8] 190 7 8 8 8 8 7 8 8 9 9 9 9 9 9 8 7 2 2 2 2 2 3 2 2 1 0 0 0 0 0 1 2
26 AIfDSo 55 1.918 1.955 134 5 0 0 185 [1:9] 168 8 9 9 8 8 9 9 8 8 8 8 8 9 9 8 8 1 0 0 1 1 0 0 0 0 0 0 0 0 0 1 1
27 AIfDSo 55 2.047 1.892 143 7 0 0 179 [1:A] 165 9 9 10 9 8 8 9 9 9 9 8 9 8 9 10 10 1 1 0 0 1 1 0 0 0 0 1 0 1 1 0 0
28 AIfDSo 55 1.818 1.903 127 3 0 0 180 [1:B] 190 8 8 8 8 8 8 8 8 6 8 8 8 8 9 8 8 0 0 0 0 0 0 0 0 2 0 0 0 1 0 0 0
29 AIfDSo 55 2.019 1.924 141 3 0 0 182 [1:C] 183 8 9 9 9 9 9 8 9 9 9 9 9 9 9 9 8 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1
30 AIfDSo 55 2.105 1.977 147 5 0 0 187 [1:D] 156 10 9 9 10 10 10 10 10 9 9 8 8 8 9 9 9 0 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0
31 AIfDSo 55 2.147 1.955 150 5 0 0 185 [1:E] 205 10 10 10 8 8 9 7 9 10 10 10 10 10 10 9 10 0 0 0 1 1 0 2 0 0 0 0 0 0 0 1 0
32 AIfDSo 55 2.076 1.998 145 10 0 0 189 [1:F] 160 10 8 8 9 9 8 9 10 8 10 10 10 9 9 9 9 0 1 1 0 0 1 1 0 2 0 0 0 1 1 1 1
33 AIfDSo 55 1.518 1.670 106 1 0 0 158 [2:0] 253 6 7 7 7 7 7 7 7 7 7 7 7 6 5 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
34 AIfDSo 55 1.260 1.649 88 2 0 0 156 [2:1] 259 6 6 6 5 5 5 5 5 5 5 6 5 6 6 6 6 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0
35 AIfDSo 55 1.518 1.427 106 3 0 0 135 [2:2] 252 7 7 7 6 7 6 7 7 5 6 6 7 7 7 7 7 0 0 0 1 0 1 0 0 1 0 0 0 0 0 0 0
36 AIfDSo 55 1.432 1.575 100 3 0 0 149 [2:3] 219 7 7 6 6 6 6 6 5 6 6 5 6 7 7 7 7 0 0 1 0 0 0 0 1 0 0 1 0 0 0 0 0
37 AIfDSo 55 1.589 1.649 111 5 0 0 156 [2:4] 193 8 8 8 7 7 7 7 7 7 7 7 7 7 6 6 5 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 3
38 AIfDSo 55 1.618 1.638 113 3 0 0 155 [2:5] 214 7 7 7 7 7 7 8 8 8 7 7 6 6 7 7 7 0 0 0 0 0 0 0 0 0 1 0 1 1 0 0 0
39 AIfDSo 55 1.804 1.744 126 0 0 0 165 [2:6] 196 8 8 8 8 8 8 8 8 8 8 8 8 7 7 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
40 AIfDSo 55 1.203 1.533 84 3 1 0 145 [2:7] 242 6 5 6 5 6 6 5 5 5 5 5 5 5 5 5 5 0 1 0 1 0 0 1 0 0 0 0 0 0 0 0 0
41 AIfDSo 55 1.603 1.564 112 5 0 0 148 [2:8] 208 7 8 8 7 7 8 7 7 7 6 7 7 7 7 6 6 0 0 0 1 1 0 0 0 0 1 0 0 0 0 1 1
42 AIfDSo 55 1.374 1.543 96 5 0 0 146 [2:9] 235 7 7 5 6 5 6 6 6 6 6 6 6 5 6 6 7 0 0 2 1 1 0 0 0 0 0 0 0 1 0 0 0
43 AIfDSo 55 1.861 1.564 130 2 0 0 148 [2:A] 209 8 9 9 7 9 8 8 8 8 8 8 8 8 8 8 8 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0
44 AIfDSo 55 1.532 1.522 107 5 0 0 144 [2:B] 216 6 7 7 7 7 7 7 7 7 7 7 5 5 7 7 7 1 0 0 0 0 0 0 0 0 0 0 2 2 0 0 0
45 AIfDSo 55 1.689 1.564 118 4 0 0 148 [2:C] 221 8 8 8 7 6 7 6 7 7 8 8 8 8 8 7 7 0 0 0 0 1 0 1 0 0 0 0 0 0 0 1 1
46 AIfDSo 55 1.632 1.638 114 6 0 0 155 [2:D] 231 7 8 8 7 8 7 6 6 7 7 7 7 7 7 7 8 1 0 0 1 0 1 1 1 0 0 0 0 0 0 1 0
speed:2475 noncerate[GH/s]:74.947 (1.629/chip) hashrate[GH/s]:77.771 good:5235 errors:285 spi-err:1 miso-err:0 jobs:376 cores:71% good:45 bad:1 off:0 (best[GH/s]:73.802) Sat Sep 7 04:10:59 2013
0: 825 23.350 24.416 1631 99 0 0 15 1 0 (1.459/chip) 66%
1: 880 29.965 31.075 2093 139 0 0 16 0 0 (1.873/chip) 75%
2: 770 21.632 22.281 1511 47 1 0 14 0 0 (1.545/chip) 70%
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
September 07, 2013, 05:33:33 AM
Last edit: September 07, 2013, 06:46:01 AM by goxed |
|
Guys heads up on pencil mod for overvolting and thus aiding overclocking.
Use pencil mod on R2F, make it around 1.1 - 1.2K, voltage goes from 0.66V to 0.81V. The default value is ~1.3K. It may blow the 30AFuse if you go too high; so make sure you do it only if you have a soldering station handy After Mod (I have only 3 H cards ) Bank 1
1: 30.781GH/s
2: 33.315GH/s
3: 30.022GH/s
4: 0GH/s
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
|
