[ANN] US/North American Bitfury sales NEW STOCK ***NOW SHIPPING***

[jspielberg]

Mine shows as delivered!!!

Edit:  Even while USPS showed delivery to another state... it was in fact delivered correctly.

[1713551664]

1713551664

[1713551664]

1713551664

[1713551664]

1713551664

[xstr8guy]

I have a tracking number for order 97.
order number 116 looks like it's still in 'paid' status.  I think 116 is the last august regular order. There are probably a few august refund orders after it.

/cet

I'm in the 130s for an August order and am still sitting at paid.

I bought the last starter kit for Aug and it's in the 2xx range - still showing as paid

I'm not sure how that's possible unless the order numbers aren't consecutive for some reason.  My October order from 7/11 (paid on 7/11 as well) is 19x.  Sure wish I had made the August order cutoff.

[EvilLizardApparel]

PSU ISSUE FIXED...now this...

Hey guys - I just got word that we sent out your rPi's configured with a weird gateway IP.  This is going to make it hard for your rigs to reach the outside world.

To fix this you'll need to connect direct to your rPi.  Either use keyboard/monitor, or use ssh to connect to it 192.168.1.249 (unless you changed IP).

Code:

sudo nano /etc/network/interfaces

use arrow keys to get down to

Code:

gateway 192.168.1.3

change this to

Code:

gateway 192.168.1.1

...or whatever your gateway IP is.

type

Code:

ctrl-X[enter]
Yes[enter]

reboot the rPi


Sorry for the trouble!

We're putting it on a public IP, and after setting the parameters in /etc/networking/interfaces, we get no IP address showing up when doing an ifconfig.  The address, netmask, and gateway are all correct in the file.  Is there ANYTHING that we can look at to see why the networking service isn't configuring the interface?

Any ideas?

[dracore]

Aww usps went to deliver but I was at work.  Went to post office to pick up but truck did not get back yet.  sigh... guess I won't be able to set it up tonight

[dacman61]

Aww usps went to deliver but I was at work.  Went to post office to pick up but truck did not get back yet.  sigh... guess I won't be able to set it up tonight

I would camp there until it arrived, and go to the desk every 20-30 minutes to ask "Is my package here yet?"

[EvilLizardApparel]

How long on your Bitfury admin page does it take for your hashrate to update? It is still at 0 GH/s, but chips are hot and the rPi states its mining...

[kaerf]

How long on your Bitfury admin page does it take for your hashrate to update? It is still at 0 GH/s, but chips are hot and the rPi states its mining...

One of my rigs needed several minutes to update to it's full hash rate.

[-Redacted-]

Took about 10 minutes to warm up, after I figured out that you don't use http:// in front of the pool URL, it even started to mine....


I'm a little short on one card, and over on the other....


Noncerate: 52.957GH/s

Bank 1
1: 29.478GH/s
2: 23.479GH/s

[kaerf]

Here are some pix from my unboxing  
http://imgur.com/a/7Q7M6

I got a bad h-card, so it took a while to figure out why one of the rigs wasn't working properly. dave has already said he will send a replacement. another example of awesome support from this team.

[dben428]

Order #89 shipped. 

Thanks again to Yvonne for catching my address mistake, verifying my correct address, and still shipping in a timely manner.

[demonmaestro]

We NEED pictures! 

[-Redacted-]

Here are some.  Having one heck of a time connecting to the forum.....

http://imgur.com/a/zFFV0#0

[goxed]

Wow! awesome news guys. Keep us updated with pics, esp boards that do not work to hep us debug once our stuff arrives.

 My USPS 2day priority status is on it's 3rd business day and no delivery.

[Morblias]

Wow! awesome news guys. Keep us updated with pics, esp boards that do not work to hep us debug once our stuff arrives.

 My USPS 2day priority status is on it's 3rd business day and no delivery.

lol you are not alone bro. if they don't come tomorrow i will be very upset. last tracking update it is still not even in my state yet.

[demonmaestro]

Here are some.  Having one heck of a time connecting to the forum.....

http://imgur.com/a/zFFV0#0

https://www.modmypi.com/shop has some good extensions for the GPIO pins and other things for the pi. also there is http://www.adafruit.com   

[Spotswood]

Here are some.  Having one heck of a time connecting to the forum.....

http://imgur.com/a/zFFV0#0

Yikes!  Never saw that mounting orientation of the rPi on the US m-boards coming.    Going to have to use a cable with that board.    

[-Redacted-]

Howdy Rich!  

Yes, cable ordered and on it's way. The version 2 M-boards should replace these in the near future, so it won't be an issue at some point, but it was very frustrating this evening.  Of all possible orientations for the RasPi, who could even have imagined it ending up flat, backwards, and upside down all at the same time ?  And I still love the case even though it may have seemed like I was bitching about it in the pictures....

[kwaaak]

Here are some.  Having one heck of a time connecting to the forum.....

http://imgur.com/a/zFFV0#0

[arorts]

http://www.bittimania.fi/wp-content/uploads/2013/08/psu_cheat.png

or get

http://www.robotshop.com/productinfo.aspx?pc=RB-Cyt-101&lang=en-US

if you want to get fancy.

Would that still need to solider/short some of those pins or that's meant to just flip the switch and that's it??

[Operatr]

Good show BitFury