[ANN] US/North American Bitfury sales NEW STOCK ***NOW SHIPPING***

[xstr8guy]

Dave,

If we have orders for (an October starter kit and) H-Boards for October but there's no word on v3 M-Boards, can I just get a V2 M-board and my 9 extra H-cards shipped out tomorrow?  We are fast approaching the end of October.

Thanks,
Dave

I'd like to know this too.  I have an October starter and 6 H boards.  I'd like to trade in 3 of my V2 H boards for 3 V1 boards and take the rest of my order in new gear when that comes in.  Is that doable Dave?

[Xian01]

Personally, I'm hoping patience is a virtue with these V3 boards... Looking forward to the new hotness shipping out for October full rig orders.

[tom99]

   I just found one of new 5hboards and running test got: speed:4675 noncerate[GH/s]:0.000 (0.000/chip) hashrate[GH/s]:45.449 good:0 errors:94 spi-err:18 miso-err:11 jobs:10 cores:0% good:85 bad:0 off:0 (best[GH/s]:0.000) Tue Oct 22 04:11:13 2013

dont look good maybe dead board?

[xstr8guy]

Personally, I'm hoping patience is a virtue with these V3 boards... Looking forward to the new hotness shipping out for October full rig orders.

Unless the V3 boards deliver no later than next week with 50% more hashing power, then there is no upside to waiting.  Difficulty is going up a minimum of 40% in 4 or 5 days.

Having said that, I didn't ask to change all of my orders to older boards.  I split it up 50/50 mostly because I had another Starter kit ordered and I didn't want to run it with just a single H board.  It would look too sad, lol.

[davecoin]

Personally, I'm hoping patience is a virtue with these V3 boards... Looking forward to the new hotness shipping out for October full rig orders.

Unless the V3 boards deliver no later than next week with 50% more hashing power, then there is no upside to waiting.  Difficulty is going up a minimum of 40% in 4 or 5 days.

Having said that, I didn't ask to change all of my orders to older boards.  I split it up 50/50 mostly because I had another Starter kit ordered and I didn't want to run it with just a single H board.  It would look too sad, lol.

I'm right there with ya, I would rather have my 300+ GH right now than after the next diff change. 

[tom99]

   I found problem with newer V1 hboard for use on old Mboard here pictures and can anyone tell me what do you see it in the pictures: http://picts.imgur.com/all/



ps: Anyone else want more pictures of Hboards but I need to some rest.

[xstr8guy]

   I found problem with newer V1 hboard for use on old Mboard here pictures and can anyone tell me what do you see it in the pictures: http://picts.imgur.com/all/



ps: Anyone else want more pictures of Hboards but I need to some rest.

Broken link

[arorts]

So h-boards are back in stock with 250 count... where's the shipments?

Wow, I literally hit Save about 30 seconds ago...yes I have a few extra H-cards of the old type that arrived.  Since I don't the M-boards for them, they are only useful for filling out your V1 or V2 M-boards.  Buy them now, and they will ship immediately.

Production is cranking for the next-gen boards, but I haven't received any shipping notifications yet.  I expect to see something in the next day or two...when product is on the way I'll give an update.

i have not yet gotten my store credit for august delay. push that through and i'll probably buy a board.

however, a price drop to $400 would be appropriate i think. $500 is fairly steep at this point

Agree. Once pre-orders are filled and have in-stock, why are the h-board prices of version 1 not being adjusted and still cost the same as initially announced??? It's only a week from November by the time those cards are delivered anyway. Doesn't make sense. At this point, they must carry around a 70% margin on those cards while the ROI on those cards for miners must be around 10%, if anything. In other words, at a price that neglects reality bitfury is sucking almost every single drop of value both in BTC terms and in relation to other competitive products delivered this month like KNC. I agree their price of those cards shouldn't exceed $400.

[tom99]

   I found problem with newer V1 hboard for use on old Mboard here pictures and can anyone tell me what do you see it in the pictures: http://picts.imgur.com/all/



ps: Anyone else want more pictures of Hboards but I need to some rest.

Broken link

 here fix link



ps: I am going to return bad hboards to Dave and anyone got link for return or exchange bad hboards?

Thank you

[-Redacted-]

So h-boards are back in stock with 250 count... where's the shipments?

Wow, I literally hit Save about 30 seconds ago...yes I have a few extra H-cards of the old type that arrived.  Since I don't the M-boards for them, they are only useful for filling out your V1 or V2 M-boards.  Buy them now, and they will ship immediately.

Production is cranking for the next-gen boards, but I haven't received any shipping notifications yet.  I expect to see something in the next day or two...when product is on the way I'll give an update.

i have not yet gotten my store credit for august delay. push that through and i'll probably buy a board.

however, a price drop to $400 would be appropriate i think. $500 is fairly steep at this point

Agree. Once pre-orders are filled and have in-stock, why are the h-board prices of version 1 not being adjusted and still cost the same as initially announced??? It's only a week from November by the time those cards are delivered anyway. Doesn't make sense. At this point, they must carry around a 70% margin on those cards while the ROI on those cards for miners must be around 10%, if anything. In other words, at a price that neglects reality bitfury is sucking almost every single drop of value both in BTC terms and in relation to other competitive products delivered this month like KNC. I agree their price of those cards shouldn't exceed $400.

The h-boards will now return approximately $300 in their useful lifetime given the recent increase in value of BTC.  Shortly after the first of November, that will have dropped by almost 50%.

[zurg]

So h-boards are back in stock with 250 count... where's the shipments?

Wow, I literally hit Save about 30 seconds ago...yes I have a few extra H-cards of the old type that arrived.  Since I don't the M-boards for them, they are only useful for filling out your V1 or V2 M-boards.  Buy them now, and they will ship immediately.

Production is cranking for the next-gen boards, but I haven't received any shipping notifications yet.  I expect to see something in the next day or two...when product is on the way I'll give an update.

i have not yet gotten my store credit for august delay. push that through and i'll probably buy a board.

however, a price drop to $400 would be appropriate i think. $500 is fairly steep at this point

Agree. Once pre-orders are filled and have in-stock, why are the h-board prices of version 1 not being adjusted and still cost the same as initially announced??? It's only a week from November by the time those cards are delivered anyway. Doesn't make sense. At this point, they must carry around a 70% margin on those cards while the ROI on those cards for miners must be around 10%, if anything. In other words, at a price that neglects reality bitfury is sucking almost every single drop of value both in BTC terms and in relation to other competitive products delivered this month like KNC. I agree their price of those cards shouldn't exceed $400.

The h-boards will now return approximately $300 in their useful lifetime given the recent increase in value of BTC.  Shortly after the first of November, that will have dropped by almost 50%.

+1

Has anyone even ROId on their Aug kit?
If I use the Aug BTC prices of lets say $110 then I just passed 1/2 mark on my $1.3k kit.. that I am running at 45gh/s
With today's prices I just ROIed though.
Definitely not getting the h-card as $500 for let's say 32GH/s is a loosing proposition at this point.

[klondike_bar]

So h-boards are back in stock with 250 count... where's the shipments?

Wow, I literally hit Save about 30 seconds ago...yes I have a few extra H-cards of the old type that arrived.  Since I don't the M-boards for them, they are only useful for filling out your V1 or V2 M-boards.  Buy them now, and they will ship immediately.

Production is cranking for the next-gen boards, but I haven't received any shipping notifications yet.  I expect to see something in the next day or two...when product is on the way I'll give an update.

i have not yet gotten my store credit for august delay. push that through and i'll probably buy a board.

however, a price drop to $400 would be appropriate i think. $500 is fairly steep at this point

Agree. Once pre-orders are filled and have in-stock, why are the h-board prices of version 1 not being adjusted and still cost the same as initially announced??? It's only a week from November by the time those cards are delivered anyway. Doesn't make sense. At this point, they must carry around a 70% margin on those cards while the ROI on those cards for miners must be around 10%, if anything. In other words, at a price that neglects reality bitfury is sucking almost every single drop of value both in BTC terms and in relation to other competitive products delivered this month like KNC. I agree their price of those cards shouldn't exceed $400.

The h-boards will now return approximately $300 in their useful lifetime given the recent increase in value of BTC.  Shortly after the first of November, that will have dropped by almost 50%.

+1

Has anyone even ROId on their Aug kit?
If I use the Aug BTC prices of lets say $110 then I just passed 1/2 mark on my $1.3k kit.. that I am running at 45gh/s
With today's prices I just ROIed though.
Definitely not getting the h-card as $500 for let's say 32GH/s is a loosing proposition at this point.

offered a proper price, i would like to fill my m-board. but at $500 it would make no sense. $400 and id buy a few. $300 and id buy a dozen.

I got a starter kit and an october board when they were $450. i doubt ill make more mining vs if i had bought coins at the time, but at the new $170/BTC price, i will probably break even in 4-6 months. I like the hardware, and its power-efficient, but the pricing makes getting profit a tricky situation when were looking at 100%/month increases for the next 2-4 months

[wpgdeez]

Problem is everyone is going to do the same as you so your extra hash power is only good until the next diff increase. There is no money to be made unless you are peddling this shit.

[Morblias]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking  



Thanks Dave and team Bitfury!

Edit: hit 505gh/s!

[Trongersoll]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking 



Thanks Dave and team Bitfury!

That warning is really annoying when you are on a pool with auto adjusting difficulty. Makes me wanna slap something.

[tom99]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking 



Thanks Dave and team Bitfury!

  Did you get any Hboards drop to 0 hashrate about 15 minutes?  I got one DOA and 4 other Hboards drop to 0 hashrate 15 or less.

[Morblias]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking 

https://i.imgur.com/r1JKPoO.png

Thanks Dave and team Bitfury!

  Did you get any Hboards drop to 0 hashrate about 15 minutes?  I got one DOA and 4 other Hboards drop to 0 hashrate 15 or less.

It's been running for about 20 minutes fine now. Up to 497gh/s

[tom99]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking  

https://i.imgur.com/r1JKPoO.png

Thanks Dave and team Bitfury!

  Did you get any Hboards drop to 0 hashrate about 15 minutes?  I got one DOA and 4 other Hboards drop to 0 hashrate 15 or less.

It's been running for about 20 minutes fine now. Up to 497gh/s

  You are good then pass 20 minutes.

Are you running on new V3 h/w?

[Morblias]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking  

https://i.imgur.com/r1JKPoO.png

Thanks Dave and team Bitfury!

  Did you get any Hboards drop to 0 hashrate about 15 minutes?  I got one DOA and 4 other Hboards drop to 0 hashrate 15 or less.

It's been running for about 20 minutes fine now. Up to 497gh/s

  You are good then pass 20 minutes.

Are you running on new V3 h/w?

v1 M-board and v1 H-boards. They are running pretty damn solid!

[tom99]

Just got the rest of my h-boards today! pushing 490gh/s with no overclocking 

https://i.imgur.com/r1JKPoO.png

Thanks Dave and team Bitfury!

  Did you get any Hboards drop to 0 hashrate about 15 minutes?  I got one DOA and 4 other Hboards drop to 0 hashrate 15 or less.

It's been running for about 20 minutes fine now. Up to 497gh/s

  You are good then pass 20 minutes.

Are you running on new V3 h/w?

v1 M-board and v1 H-boards. They are running pretty damn solid!

   I am pretty upset right now and I dont know 5 Hboard arent working right.  I got it yesterday.