ricolein
Member
Offline
Activity: 85
Merit: 10
|
|
October 21, 2013, 08:09:00 AM |
|
with only 1 H-board in place drawing 45W, can I only use 1x 6pin PCI-E power cable instead of 2 of them? if so. which one, left or right?
With a fast look to the layout i think it should be okay to use just one, no matter which one. Because the layout join this two power cable. Ciao Enrico
|
|
|
|
darkfriend77 (OP)
|
|
October 21, 2013, 09:46:45 AM |
|
Added:4. How to fix an empty miner File?NOTEDue to my personal epic screw-up the SD image does not contain a working binary. And on top of this some orders were shipped without instructions also We have whipped ourselves vigorously here over the weekend and will try to improve our process so these bloopers don't happen in the future. Here's how to get your miner working: 1. Check your router for bitfury IP 2. SSH into the raspberry pi (username pi password raspberry) 3. Run following commands: cd /opt/bitfury/chainminer sudo make clean sudo make sudo killall screen sudo /etc/rc.local
You should now be mining. You can check the web interface of the miner with a normal browser and setup your pools there (use the IP that you used for SSH).
|
|
|
|
nowywbitcoinowymswiecie
Member
Offline
Activity: 71
Merit: 10
|
|
October 21, 2013, 03:57:07 PM |
|
For people having hashrate drops - borrow PSU from friend and check.
In my case I had malfunctioning PSU (400W). It works perfectly in PC but it turn out connecting it to miner (2 H boards) I had strange fluctuations with hashrate. It didnt drop to 0 but instead went form ~50GH to ~10GH after some time. Again - that PSU works fine in PC. Finally Ive put another PSU - cheap 350W, 20$ chinese one and it runs perfectly - 58GH rock solid.
I think some PSU have some kind of regulator (whatever thingy...) and dont push full power. Or, they simply are a lazy bastards.
|
newbee here 1PkHkAEssCQoarLz6hcmQzF9zbaxGrxdFz
|
|
|
Isokivi
|
|
October 21, 2013, 07:34:26 PM |
|
For people having hashrate drops - borrow PSU from friend and check.
In my case I had malfunctioning PSU (400W). It works perfectly in PC but it turn out connecting it to miner (2 H boards) I had strange fluctuations with hashrate. It didnt drop to 0 but instead went form ~50GH to ~10GH after some time. Again - that PSU works fine in PC. Finally Ive put another PSU - cheap 350W, 20$ chinese one and it runs perfectly - 58GH rock solid.
I think some PSU have some kind of regulator (whatever thingy...) and dont push full power. Or, they simply are a lazy bastards.
Interesting, this is definetley something I need to check out as I have been having some stability issues at ~500w pover drawn trough a 750W PSU.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 06:55:10 AM |
|
Since I filled each slot in my miner I'm having also ... problems to maintain ... hashrate of each board over 30 GH ... I'm unsure if it's because of the heat ... or the heatsinks ... that are blocking airflow, ... a PSU issue? .... some how I've some boards that work on one slot better then on an other one ... does anyone has a good approach how to get ... the best postitions ... ^^
also I'm seeking good heatsinks ... for the regulator part the arctic cooling stuff is to big ... something around 5 mm ...
|
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 09:02:12 AM Last edit: October 22, 2013, 09:22:53 AM by darkfriend77 |
|
Seems a PSU problem ... as soon as I pull to random cards of the mboard ... I get all cards hashing well again ... ... Im using ... Club 3D CSP-X1200CS, 1200 Watt, 80 Plus Silber I'm unsure is this PSU limiting wattage on 2 PCiE ... to 2 x 255 Watt?
|
|
|
|
ktbken
|
|
October 22, 2013, 09:58:23 AM |
|
Looks like you have a multi rail Psu have you tried plugin one pcie connecter in from 2 diff pcie sets ?
|
|
|
|
jlsminingcorp
|
|
October 22, 2013, 11:29:50 AM |
|
Looks like you have a multi rail Psu have you tried plugin one pcie connecter in from 2 diff pcie sets ?
Yes, you'll need to figure out which connectors are on which 12V rail. If you're using two pcie connectors from the same 12V rail then the total power will be limited to 480W (if the details from your PSU manufacturer about the different rails are to be believed). These PSU manufacturers are sneaky though, sometimes their rails are not configured in the way that they say! A good site to look at is http://www.jonnyguru.com/, but I don't think that your PSU has been reviewed there.
|
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 11:57:06 AM |
|
Looks like you have a multi rail Psu have you tried plugin one pcie connecter in from 2 diff pcie sets ?
Yes, you'll need to figure out which connectors are on which 12V rail. If you're using two pcie connectors from the same 12V rail then the total power will be limited to 480W (if the details from your PSU manufacturer about the different rails are to be believed). These PSU manufacturers are sneaky though, sometimes their rails are not configured in the way that they say! A good site to look at is http://www.jonnyguru.com/, but I don't think that your PSU has been reviewed there. This should be the ... separation on the rails ...
|
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
October 22, 2013, 12:02:24 PM |
|
Since I filled each slot in my miner I'm having also ... problems to maintain ... hashrate of each board over 30 GH ... I'm unsure if it's because of the heat ... or the heatsinks ... that are blocking airflow, ... a PSU issue? .... some how I've some boards that work on one slot better then on an other one ... does anyone has a good approach how to get ... the best postitions ... ^^
also I'm seeking good heatsinks ... for the regulator part the arctic cooling stuff is to big ... something around 5 mm ...
In my experience it's a big problem when more than 3 slots per bank are used and to have >30GH/s per board. I think it's a software issue. Any hints from the developers would be awesome. I have even tried soldering power cables form each H-board directly to the 12V connector, but no fish.
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
jlsminingcorp
|
|
October 22, 2013, 12:47:43 PM |
|
Looks like you have a multi rail Psu have you tried plugin one pcie connecter in from 2 diff pcie sets ?
Yes, you'll need to figure out which connectors are on which 12V rail. If you're using two pcie connectors from the same 12V rail then the total power will be limited to 480W (if the details from your PSU manufacturer about the different rails are to be believed). These PSU manufacturers are sneaky though, sometimes their rails are not configured in the way that they say! A good site to look at is http://www.jonnyguru.com/, but I don't think that your PSU has been reviewed there. This should be the ... separation on the rails ... OK, so with 80A max on the two non-modular pcie cables this should power the miner with no problems at all. I guess the problem does lie elsewhere, as goxed mentions. Good luck finding the solution!
|
|
|
|
Isokivi
|
|
October 22, 2013, 12:55:59 PM |
|
Since I filled each slot in my miner I'm having also ... problems to maintain ... hashrate of each board over 30 GH ... I'm unsure if it's because of the heat ... or the heatsinks ... that are blocking airflow, ... a PSU issue? .... some how I've some boards that work on one slot better then on an other one ... does anyone has a good approach how to get ... the best postitions ... ^^
also I'm seeking good heatsinks ... for the regulator part the arctic cooling stuff is to big ... something around 5 mm ...
Part of the problem for me atlest is the undisputable fact that some of my boards require different cooling than others. The rev 1 boards do have problems starting up when too cool. Before someone goes a head and dismisses this as absurd or tries to refute my point: stick one rev 1 board in the freezer, untill it's at 0c and see if it starts mining at anything above 8Ghs. My current physical setup has the capability of feeding sub zero celcius air to the fans during nights... and getting cooler by the day. Sadly the sweet spot where everything works is not as big as I'd hope it to be.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
October 22, 2013, 01:38:57 PM |
|
Since I filled each slot in my miner I'm having also ... problems to maintain ... hashrate of each board over 30 GH ... I'm unsure if it's because of the heat ... or the heatsinks ... that are blocking airflow, ... a PSU issue? .... some how I've some boards that work on one slot better then on an other one ... does anyone has a good approach how to get ... the best postitions ... ^^
also I'm seeking good heatsinks ... for the regulator part the arctic cooling stuff is to big ... something around 5 mm ...
In my experience it's a big problem when more than 3 slots per bank are used and to have >30GH/s per board. I think it's a software issue. Any hints from the developers would be awesome. I have even tried soldering power cables form each H-board directly to the 12V connector, but no fish. I found some sweet 35x35x6mm heatsinks. 4 of them work great per board and leave room for airflow between slots. as for 3 slots per bank, i beleive its related to the 30A limit of a texas instruments chip mentioned by intron a while back. Its got 10-14 pins and there is 1 per bank. Most likely it simply cannot handle more then 3 overclocked cards or 4 cards at 25GH
|
|
|
|
Isokivi
|
|
October 22, 2013, 01:47:53 PM |
|
as for 3 slots per bank, i beleive its related to the 30A limit of a texas instruments chip mentioned by intron a while back. Its got 10-14 pins and there is 1 per bank. Most likely it simply cannot handle more then 3 overclocked cards or 4 cards at 25GH
I'd like report the contrary, this is my most stable bank:
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
October 22, 2013, 02:28:22 PM |
|
as for 3 slots per bank, i beleive its related to the 30A limit of a texas instruments chip mentioned by intron a while back. Its got 10-14 pins and there is 1 per bank. Most likely it simply cannot handle more then 3 overclocked cards or 4 cards at 25GH
I'd like report the contrary, this is my most stable bank: Can you please post the log file of these chips? It would be helpful to mod the chainminer software. Also what voltage are the cards at? Thanks
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 02:42:24 PM |
|
as for 3 slots per bank, i beleive its related to the 30A limit of a texas instruments chip mentioned by intron a while back. Its got 10-14 pins and there is 1 per bank. Most likely it simply cannot handle more then 3 overclocked cards or 4 cards at 25GH
I'd like report the contrary, this is my most stable bank: Do you got all banks filled ? ... How about the other banks ...
|
|
|
|
Isokivi
|
|
October 22, 2013, 02:43:46 PM |
|
Can you please post the log file of these chips? It would be helpful to mod the chainminer software. Also what voltage are the cards at? Thanks
Sure. 94 AIfDSo 53 2.119 2.389 148 0 0 0 226 [8:0] 0 9 9 9 9 9 9 9 9 10 10 10 10 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 95 AIfDSo 53 2.305 2.368 161 0 0 0 224 [8:1] 0 10 10 10 10 10 10 10 10 10 10 11 10 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 96 aIfDSo 54 2.248 2.473 157 8 0 0 234 [8:2] 0 10 10 10 11 10 9 10 10 10 10 9 10 10 10 10 8 1 1 1 0 1 1 0 0 0 0 1 0 0 0 0 2 97 AIfDSo 54 2.548 2.420 178 2 0 0 229 [8:3] 0 12 12 12 12 11 11 11 11 11 11 10 11 11 10 11 11 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 98 aIfDSo 55 2.147 2.579 150 13 0 0 244 [8:4] 42 9 9 8 9 9 10 10 9 10 9 10 9 9 10 10 10 1 1 2 1 1 0 0 1 0 1 0 1 2 1 1 0 99 aIfDSo 54 2.419 2.505 169 0 0 0 237 [8:5] 0 11 11 11 10 10 10 10 10 10 10 11 11 11 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 100 AIfDSo 53 2.734 2.452 191 1 0 0 232 [8:6] 0 12 12 12 11 12 12 12 12 12 12 12 12 12 12 12 12 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 101 AIfDSo 55 2.677 2.854 187 30 0 0 270 [8:7] 0 11 10 12 10 13 13 14 11 12 10 11 12 12 11 13 12 3 4 2 4 1 1 0 3 1 3 2 1 1 2 0 2 speed down 102 AIfDSo 54 2.548 2.685 178 7 0 0 254 [8:8] 0 11 12 11 12 12 12 12 12 10 11 11 11 11 10 10 10 0 0 1 0 0 0 0 0 2 1 0 0 0 1 1 1 speed down 103 AIfDSo 54 2.649 2.505 185 2 0 0 237 [8:9] 0 12 11 11 11 11 11 12 12 12 11 12 12 12 12 11 12 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 104 AIfDSo 54 2.319 2.431 162 0 0 0 230 [8:A] 0 10 10 11 11 10 10 10 10 10 10 10 10 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 105 aIfDSo 55 2.233 2.558 156 2 0 0 242 [8:B] 0 9 9 10 10 10 10 10 9 9 10 10 10 10 10 10 10 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 106 aIfDSo 55 2.677 2.653 187 0 0 0 251 [8:C] 0 12 12 12 12 12 12 12 12 12 12 12 11 11 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 107 aIfDSo 54 2.205 2.516 154 0 0 0 238 [8:D] 0 10 10 9 9 9 9 9 9 10 10 10 10 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 108 AIfDSo 53 2.448 2.420 171 2 0 0 229 [8:E] 0 10 10 9 11 11 11 10 11 11 11 11 11 11 11 11 11 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 109 aIfDSo 55 2.563 2.727 179 1 0 0 258 [8:F] 0 11 11 11 11 10 11 11 11 11 11 11 11 12 12 12 12 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 110 AIfDSo 55 2.505 2.769 175 5 0 0 262 [9:0] 0 12 10 10 11 9 11 11 11 11 10 11 11 11 12 12 12 0 1 1 0 2 0 0 0 0 1 0 0 0 0 0 0 111 AIfDSo 53 2.190 2.442 153 2 0 0 231 [9:1] 0 9 9 10 10 10 10 10 10 10 10 10 10 9 9 9 8 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 112 AIfDSo 53 2.505 2.368 175 1 0 0 224 [9:2] 0 11 11 10 11 11 11 11 11 11 11 11 11 11 11 11 11 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 113 AIfDSo 54 2.577 2.452 180 2 0 0 232 [9:3] 0 11 11 11 11 10 10 11 11 11 12 12 12 12 12 12 11 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 114 aIfDSo 55 2.749 2.695 192 16 0 0 255 [9:4] 38 11 13 10 12 13 12 12 12 12 12 12 13 12 12 12 12 2 0 3 1 0 1 1 1 1 1 1 0 1 1 1 1 115 AIfDSo 54 2.620 2.590 183 1 0 0 245 [9:5] 0 12 12 12 12 12 12 12 11 10 11 11 11 11 11 11 12 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 116 AIfDSo 53 2.334 2.357 163 0 0 0 223 [9:6] 0 10 10 10 10 11 11 11 10 10 10 10 10 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 117 AIfDSo 53 2.548 2.600 178 0 0 0 246 [9:7] 36 11 11 11 11 11 11 11 11 11 12 12 11 11 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 118 AIfDSo 54 2.133 2.061 149 1 0 0 195 [9:8] 0 10 10 10 10 9 9 9 9 9 8 9 9 9 9 10 10 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 119 AIfDSo 53 2.448 2.410 171 0 0 0 228 [9:9] 0 11 11 11 11 11 10 10 10 10 10 11 11 11 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up 120 AIfDSo 54 2.792 2.579 195 0 0 0 244 [9:A] 0 12 12 12 12 12 12 12 12 13 13 13 12 12 12 12 12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up 121 AIfDSo 54 2.462 2.325 172 1 0 0 220 [9:B] 0 10 11 11 11 10 10 10 11 11 11 11 11 11 11 11 11 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 122 AIfDSo 55 2.749 2.801 192 2 0 0 265 [9:C] 0 12 12 12 12 13 12 12 12 11 12 12 12 12 12 12 12 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 123 AIfDSo 54 2.720 2.621 190 2 0 0 248 [9:D] 0 12 12 12 12 12 12 11 12 11 12 12 12 12 12 12 12 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 124 aIfDSo 54 2.563 2.653 179 0 0 0 251 [9:E] 0 11 11 12 12 12 11 11 11 11 11 11 11 11 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 125 AIfDSo 54 2.448 2.685 171 4 0 0 254 [9:F] 0 10 10 10 11 11 11 11 10 11 11 11 11 10 11 11 11 1 1 1 0 0 0 0 1 0 0 0 0 0 0 0 0 126 AIfDSo 54 2.305 2.357 161 0 0 0 223 [A:0] 36 10 10 10 10 10 10 10 10 10 10 10 11 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 AIfDSo 54 2.477 2.516 173 2 0 0 238 [A:1] 0 11 11 11 11 11 10 10 11 10 11 11 11 11 11 11 11 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 128 AIfDSo 54 1.002 1.068 70 1 0 2 101 [A:2] 0 5 5 5 5 4 5 5 4 4 4 4 4 4 4 4 4 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 129 aIfDSo 55 2.634 2.431 184 10 0 0 230 [A:3] 0 13 11 12 12 10 12 11 10 12 12 12 11 12 11 11 12 0 2 0 0 2 0 1 1 0 0 0 1 0 1 1 1 130 AIfDSo 56 2.162 2.653 151 31 0 0 251 [A:4] 0 10 11 11 11 11 9 8 9 11 10 7 8 10 8 8 9 2 1 1 1 1 2 3 2 0 1 4 2 1 3 4 3 speed down 131 AIfDSo 55 1.174 1.068 82 0 0 0 101 [A:5] 0 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up 132 AIfDSo 54 2.419 2.463 169 3 1 0 233 [A:6] 0 11 11 10 11 11 11 11 11 11 10 9 9 10 11 11 11 0 0 1 0 0 0 0 0 0 0 1 1 0 0 0 0 133 AIfDSo 54 2.462 2.547 172 2 0 0 241 [A:7] 0 11 11 11 10 9 11 11 10 11 11 11 11 11 11 11 11 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 134 AIfDSo 54 2.606 2.431 182 0 0 0 230 [A:8] 0 12 12 11 11 11 11 11 11 11 11 10 12 12 12 12 12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up 135 aIfDSo 54 2.577 2.452 180 16 0 0 232 [A:9] 0 10 12 10 11 11 11 11 12 12 11 12 13 12 11 11 10 2 0 2 1 1 0 0 0 1 2 1 0 1 2 1 2 136 AIfDSo 55 2.878 2.494 201 1 0 0 236 [A:A] 0 13 13 12 13 13 13 12 12 12 11 12 13 13 13 13 13 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 137 aIfDSo 56 2.276 2.664 159 25 0 0 252 [A:B] 0 9 10 10 10 11 9 10 11 11 10 11 10 9 9 9 10 2 1 2 1 1 3 2 1 1 2 1 1 2 2 2 1 138 AIfDSo 55 2.348 2.505 164 5 0 0 237 [A:C] 0 10 10 9 11 11 11 10 11 10 11 11 10 10 10 10 9 0 0 1 0 0 0 1 0 1 0 0 1 0 0 0 1 139 AIfDSo 55 2.591 2.516 181 5 0 0 238 [A:D] 0 10 11 10 12 12 12 12 12 12 12 12 10 11 11 11 11 1 0 1 0 1 0 0 0 0 0 0 1 1 0 0 0 140 AIfDSo 53 2.319 2.262 162 1 0 0 214 [A:E] 0 9 10 11 11 11 11 10 10 10 10 10 10 10 10 10 9 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 141 AIfDSo 55 2.663 2.621 186 4 0 0 248 [A:F] 0 12 12 11 12 12 12 13 13 11 11 11 11 11 12 11 11 0 0 1 0 0 0 0 0 1 0 0 0 0 0 1 1 142 AIfDSo 54 2.076 2.198 145 0 0 0 208 [B:0] 0 9 9 8 8 10 10 10 9 9 9 9 9 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 143 AIfDSo 55 2.391 2.420 167 3 0 0 229 [B:1] 0 10 10 9 10 10 11 11 11 11 10 10 11 11 11 11 10 0 0 1 0 0 0 0 0 0 1 1 0 0 0 0 0 144 AIfDSo 54 1.961 2.093 137 5 0 0 198 [B:2] 0 8 9 9 8 9 9 9 9 8 9 8 8 8 8 9 9 0 0 0 1 0 0 0 0 1 0 0 1 1 1 0 0 145 AIfDSo 55 2.391 2.188 167 14 0 0 207 [B:3] 0 11 11 11 10 10 10 9 10 10 10 10 11 11 11 11 11 0 0 0 0 0 0 1 1 1 1 2 2 2 2 1 1 speed down 146 aIfDSo 55 1.933 2.135 135 3 0 2 202 [B:4] 0 8 8 9 9 9 9 9 8 8 9 9 9 8 8 7 8 0 0 0 0 0 0 0 1 1 0 0 0 0 0 1 0 147 AIfDSo 53 2.534 2.124 177 2 0 0 201 [B:5] 0 11 10 12 11 11 12 12 12 11 11 11 10 11 11 11 10 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 148 AIfDSo 55 2.305 2.346 161 4 0 0 222 [B:6] 0 9 9 9 10 10 10 10 10 10 11 10 10 10 11 11 11 1 1 0 0 0 0 0 0 0 0 1 0 1 0 0 0 149 AIfDSo 55 1.861 2.378 130 4 0 0 225 [B:7] 36 7 7 7 9 9 9 9 9 9 8 7 8 8 8 8 8 0 1 2 0 0 0 0 0 0 0 1 0 0 0 0 0 150 AIfDSo 53 2.291 2.167 160 27 0 0 205 [B:8] 0 11 11 10 8 9 10 10 10 10 10 10 10 10 10 10 11 0 1 2 2 2 2 2 2 2 2 2 2 2 2 1 1 speed down 151 AIfDSo 53 2.190 2.146 153 0 0 2 203 [B:9] 0 10 10 10 10 10 8 9 9 9 9 10 9 10 10 10 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 speed up 152 AIfDSo 55 2.090 2.336 146 3 0 0 221 [B:A] 0 8 10 9 10 10 8 8 9 9 9 9 9 9 9 10 10 1 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 153 AIfDSo 55 1.961 2.167 137 2 0 0 205 [B:B] 0 9 9 9 9 9 9 9 8 7 8 9 7 8 9 9 9 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 154 AIfDSo 56 2.248 2.346 157 20 0 0 222 [B:C] 0 11 9 9 9 10 10 10 10 10 10 10 9 9 10 10 11 0 0 0 0 0 0 2 2 2 2 2 3 3 2 1 1 speed down 155 aIfDSo 55 2.033 2.177 142 3 0 2 206 [B:D] 0 8 9 8 8 9 9 9 9 9 9 10 10 9 10 8 8 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 156 AIfDSo 55 2.620 2.283 183 1 0 0 216 [B:E] 0 12 12 12 12 11 11 11 11 11 11 11 12 12 12 11 11 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 157 AIfDSo 54 2.033 2.241 142 2 0 0 212 [B:F] 0 9 8 8 8 8 9 9 8 10 10 10 9 9 9 9 9 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
I dont/wont measure voltages, as it requires disassembly and has the accompanied risk of breaking stuff, I dont have very steady hands, sorry. The resistances on R02F's vary between 1.67-1.62k Ohm.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
Isokivi
|
|
October 22, 2013, 02:44:28 PM |
|
Do you got all banks filled ? ...
How about the other banks ...
That is the only full bank I have, the remaining ones have 3-2 cards.
|
Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 02:45:46 PM |
|
... Im pretty sure thats the problem ... if i remove 2 cards all my banks get much higher hashrate and ... also the filled ones ...
|
|
|
|
darkfriend77 (OP)
|
|
October 22, 2013, 02:46:44 PM |
|
Could this be because they don't get enough power? .... damn should i change PSU? Im absolutly unsure where to start ...
|
|
|
|
|