NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching

[skablast]

lyra2z with tpruvot on Zergpool is reporting 225 $/day with 6 GTX 1050ti.
I will try to move to the 24h as I cann't delete all the miners.
No, also the 2h hour is giving the same results.

In fact it claim to have mined at 127 GH


I will remove tpruvot as well from the algo

[Firstishe]

Thank you,  MrPlus, zpool is fixed.

But have another trubles
http://www.imageup.ru/img204/3119206/snimok-ehkrana-2018-07-08-v-224949.jpg.html
1. hashrefenery. profit values dont see, but pool in list.
Api work from my host, i am testing
http://pool.hashrefinery.com/api/status

2. Equilhash from zergpool. Benchmark hashrate see as true from 6x1060-6 (183kh), but profit is not correct.

3. YescryptR16 from blockmasters, another problem

[JCS-CCT]

MrPlus,

Thank you for the latest release and your continued support on this project!

I get the "Failed: 1" (in red text) error for x16r, yescriptR16, yescript, neoscript, and c11.  GPU:1080TI

I haven't had a chance to troubleshoot, but will try and figure out what is wrong tomorrow.

[thunderbolt]

very often i see this, thy is the stratum tcp not filled, using ahashpoolplus and zergpoolplus

Code:

Running:

    Speed Started  Active   Cnt  Command
    ----- -------  ------   ---  -------
0,00 PH/s 00:00:01 00:00:01 Once Bin\NVIDIA-ccminerx16r\ccminer.exe -b 4068 -R 1 -a x16r -o stratum+tcp://: -u  -p  -
                                 0,1,2,3


--------------------------------------------------------------------------------
Last Refresh: 07/10/2018 08:19:45
Sleeping 120

it looks like the calculation for the equihash on zergpool is not correct

Code:

   Type: NVIDIA

Miner               Algorithm         Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----               ---------         ----- -------- ------- ------- ---------- ----
Bminer              Equihash    249,65 KH/s   67,861 0,06786 432,757  271,82824 zergpoolplus-
ccminerRaven        X16r        132,04 MH/s    1,844 0,00184  11,760    0,01397 ahashpoolplus-
ccminerDumax        X16s         62,18 MH/s    1,029 0,00103   6,565    0,01656 ahashpoolplus-
ccminerPigeon       X16s         59,37 MH/s    0,983 0,00098   6,269    0,01656 ahashpoolplus-

[MrPlus]

very often i see this, thy is the stratum tcp not filled, using ahashpoolplus and zergpoolplus

Code:

Running:

    Speed Started  Active   Cnt  Command
    ----- -------  ------   ---  -------
0,00 PH/s 00:00:01 00:00:01 Once Bin\NVIDIA-ccminerx16r\ccminer.exe -b 4068 -R 1 -a x16r -o stratum+tcp://: -u  -p  -
                                 0,1,2,3


--------------------------------------------------------------------------------
Last Refresh: 07/10/2018 08:19:45
Sleeping 120

it looks like the calculation for the equihash on zergpool is not correct

Code:

   Type: NVIDIA

Miner               Algorithm         Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----               ---------         ----- -------- ------- ------- ---------- ----
Bminer              Equihash    249,65 KH/s   67,861 0,06786 432,757  271,82824 zergpoolplus-
ccminerRaven        X16r        132,04 MH/s    1,844 0,00184  11,760    0,01397 ahashpoolplus-
ccminerDumax        X16s         62,18 MH/s    1,029 0,00103   6,565    0,01656 ahashpoolplus-
ccminerPigeon       X16s         59,37 MH/s    0,983 0,00098   6,269    0,01656 ahashpoolplus-

Is there any particular circumstances where you see this behavior?
Trying to repro but failing to so far.

[MrPlus]

Released NPlusMiner 4.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.2

NPlusMiner now with a GUI and AutoUpdate

### NPlusMiner 4.2

    Candidate for AutoUpdate = Yes

 - Added EthashPhoenix miner
   - Better hashrate
   - Lower fees
 - Improved Pools polling performances
   - Thanks @thebeerbaron2018 for pointing this out!
 - Realigned all pool files so they share more similar code
 - Fixed an issue on miner file update where kept trying to download
   - Thanks @thebeerbaron2018 !
 - Fixed EWBFv2 GPU selection
Will flow through AutoUpdate
   - NPlusMiner checks for updates every 24 hours.
   - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

[r1pst4rt]

How can you easily remove miners?  Many of the miners added require CUDA 9.2 so the very latest drivers and thus auto crash.

[MrPlus]

How can you easily remove miners?  Many of the miners added require CUDA 9.2 so the very latest drivers and thus auto crash.

Preferred option:
 - Remove the algo from you're algo list on config page
Second option:
 - Simply delete the corresponding miner.ps1 files in .\miners\
 - Autoupdate might bring them back so prefer option 1

I would recommend to get the rig stable on latest drivers so you can benefit from the latest miners.

[r1pst4rt]

How can you easily remove miners?  Many of the miners added require CUDA 9.2 so the very latest drivers and thus auto crash.

Preferred option:
 - Remove the algo from you're algo list on config page
Second option:
 - Simply delete the corresponding miner.ps1 files in .\miners\
 - Autoupdate might bring them back so prefer option 1

I would recommend to get the rig stable on latest drivers so you can benefit from the latest miners.

I tried deleting the .ps1 it looks like it re-downloaded it, editing the .ps1 and placing a # to comment out the algo within the miner.ps1 was the most graceful until the software updated which overwrote the file hehe.

There seems to be multiple miners per algo so dropping the algo from the list cancels out all possible miners.  I.e. I can mine x16r with ccminer-dumax all other x16r miners are using cuda 9.2.

Agreed I should update the rig, to latest drivers, I tried earlier this week and had issues so had to roll back (damn windows).

I've just switched back to this algo switching miner, trying to see how my rigs are performing before changing them all back :-)

Once again thank you for the prompt reply.

[MrPlus]

How can you easily remove miners?  Many of the miners added require CUDA 9.2 so the very latest drivers and thus auto crash.

Preferred option:
 - Remove the algo from you're algo list on config page
Second option:
 - Simply delete the corresponding miner.ps1 files in .\miners\
 - Autoupdate might bring them back so prefer option 1

I would recommend to get the rig stable on latest drivers so you can benefit from the latest miners.

I tried deleting the .ps1 it looks like it re-downloaded it, editing the .ps1 and placing a # to comment out the algo within the miner.ps1 was the most graceful until the software updated which overwrote the file hehe.

There seems to be multiple miners per algo so dropping the algo from the list cancels out all possible miners.  I.e. I can mine x16r with ccminer-dumax all other x16r miners are using cuda 9.2.

Agreed I should update the rig, to latest drivers, I tried earlier this week and had issues so had to roll back (damn windows).

I've just switched back to this algo switching miner, trying to see how my rigs are performing before changing them all back :-)

Once again thank you for the prompt reply.

We do not recommend to disable autoupdates but it is a solution if you do not want miners to be updated.

[MrPlus]

A few users reported a problem where NPlusMiner (and NemosMiner) where randomly raising an exception.
We've worked with these users who have been really helpfull and we fixed this issue in NPlusMiner 4.2.1. BIG THANKS TO THEM !!!

NPlusMiner is currently flowing through AutoUpdate.
If you've been facing this issue, simply restart NPlusMiner and it will pick up the update. If no restart, NPlusMiner checks for updates every 24 hours.

Reference post in NemosMiner thread:
    https://bitcointalk.org/index.php?topic=1777336.msg42017720#msg42017720

MrPlus

[MrPlus]

very often i see this, thy is the stratum tcp not filled, using ahashpoolplus and zergpoolplus

Code:

Running:

    Speed Started  Active   Cnt  Command
    ----- -------  ------   ---  -------
0,00 PH/s 00:00:01 00:00:01 Once Bin\NVIDIA-ccminerx16r\ccminer.exe -b 4068 -R 1 -a x16r -o stratum+tcp://: -u  -p  -
                                 0,1,2,3


--------------------------------------------------------------------------------
Last Refresh: 07/10/2018 08:19:45
Sleeping 120

it looks like the calculation for the equihash on zergpool is not correct

Code:

   Type: NVIDIA

Miner               Algorithm         Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----               ---------         ----- -------- ------- ------- ---------- ----
Bminer              Equihash    249,65 KH/s   67,861 0,06786 432,757  271,82824 zergpoolplus-
ccminerRaven        X16r        132,04 MH/s    1,844 0,00184  11,760    0,01397 ahashpoolplus-
ccminerDumax        X16s         62,18 MH/s    1,029 0,00103   6,565    0,01656 ahashpoolplus-
ccminerPigeon       X16s         59,37 MH/s    0,983 0,00098   6,269    0,01656 ahashpoolplus-

Is there any particular circumstances where you see this behavior?
Trying to repro but failing to so far.

Could you confirm if this was happening after pausing/restarting mining?
If so, it should be fixed in next version.

[MrPlus]

I downloaded and tried 4.2.1 version.

First bugs :

For the first one, NPlusMiner states when it starts:

"INFO: Adding NPlusMiner path to Windows Defender's exclusions.. (may show an error if Windows Defender is disabled)"

This is a non blocking error and a known scenario.

For the second one, Looks like typo? We'll get it fixed.
MrPlus

Edit: Typo fixed on Master.

[MrPlus]

Released NPlusMiner 4.2.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.2.2

NPlusMiner now with a GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup
   - Added ccminerBalloon
      - Balloon needs to be manually added to the config algo list
   - Fixed stratum in swtiching log not working for some pools
   - Fixed BlockMasters pool typo in pool files

[k2laci]

This is real ?

Code:

   Type: NVIDIA

Miner               Algorithm            Speed     mBTC/Day      BTC/Day      USD/Day   BTC/GH/Day Pool
-----               ---------            -----     --------      -------      -------   ---------- ----
ccminerKlausT       YescryptR16      1,72 KH/s      125,535      0,12553      782,099 72 985,26953 blockmastersplus-
ccminerx16s         HMQ1725          4,46 MH/s        0,291      0,00029        1,814      0,06525 zpool-
ccminerTpruvot225   HMQ1725          4,38 MH/s        0,286      0,00029        1,782      0,06525 zpool-
ccminerAlexis78     X17             10,76 MH/s        0,257      0,00026        1,603      0,02392 blockmastersplus-
ccminerPigeon       X16s            11,69 MH/s        0,213      0,00021        1,329      0,01825 blockmastersplus-

Newest 4.2.2 version.

[MrPlus]

This is real ?

Code:

   Type: NVIDIA

Miner               Algorithm            Speed     mBTC/Day      BTC/Day      USD/Day   BTC/GH/Day Pool
-----               ---------            -----     --------      -------      -------   ---------- ----
ccminerKlausT       YescryptR16      1,72 KH/s      125,535      0,12553      782,099 72 985,26953 blockmastersplus-
ccminerx16s         HMQ1725          4,46 MH/s        0,291      0,00029        1,814      0,06525 zpool-
ccminerTpruvot225   HMQ1725          4,38 MH/s        0,286      0,00029        1,782      0,06525 zpool-
ccminerAlexis78     X17             10,76 MH/s        0,257      0,00026        1,603      0,02392 blockmastersplus-
ccminerPigeon       X16s            11,69 MH/s        0,213      0,00021        1,329      0,01825 blockmastersplus-

Newest 4.2.2 version.

This is a pool issue, Blockmasters API is reporting wrong estimations for YesscryptR16. (been like this for days)
Nothing we can do about on our side. Try to contact them to get it fixed.
Use another pool in the meatime or disalble YescryptR16 in algo list.

https://github.com/MrPlusGH/NPlusMiner/issues/94


MrPlus

[k2laci]

Ok, I disabled YescryptR16.

But this is program bugs :

Code:

   Type: NVIDIA

Miner               Algorithm           Speed mBTC/Day BTC/Day USD/Day  BTC/GH/Day Pool
-----               ---------           ----- -------- ------- -------  ---------- ----
EthashPhoenix       Ethash         26,53 GH/s  137,408 0,13741 856,461     0,00518 miningpoolhub-Ethereum
Bminer              Equihash       44,74 KH/s   16,885 0,01688 105,242   377,40350 zergpool-
ccminerAlexis78     X17            10,76 MH/s    0,318 0,00032   1,984     0,02958 blockmastersplus-
ccminerDumax        X17             8,02 MH/s    0,237 0,00024   1,479     0,02958 blockmastersplus-
ccminerPigeon       X16s           11,69 MH/s    0,210 0,00021   1,310     0,01798 blockmastersplus-
ccminerx16s         HMQ1725         4,46 MH/s    0,206 0,00021   1,282     0,04608 starpool-
ccminerTpruvot225   HMQ1725         4,38 MH/s    0,202 0,00020   1,259     0,04608 starpool-

My GPU is GTX 1070, Ethash real value : 26 MH/s, Equihash real value : 4-500 sol/s.

[MrPlus]

Ok, I disabled YescryptR16.

But this is program bugs :

Code:

   Type: NVIDIA

Miner               Algorithm           Speed mBTC/Day BTC/Day USD/Day  BTC/GH/Day Pool
-----               ---------           ----- -------- ------- -------  ---------- ----
EthashPhoenix       Ethash         26,53 GH/s  137,408 0,13741 856,461     0,00518 miningpoolhub-Ethereum
Bminer              Equihash       44,74 KH/s   16,885 0,01688 105,242   377,40350 zergpool-
ccminerAlexis78     X17            10,76 MH/s    0,318 0,00032   1,984     0,02958 blockmastersplus-
ccminerDumax        X17             8,02 MH/s    0,237 0,00024   1,479     0,02958 blockmastersplus-
ccminerPigeon       X16s           11,69 MH/s    0,210 0,00021   1,310     0,01798 blockmastersplus-
ccminerx16s         HMQ1725         4,46 MH/s    0,206 0,00021   1,282     0,04608 starpool-
ccminerTpruvot225   HMQ1725         4,38 MH/s    0,202 0,00020   1,259     0,04608 starpool-

My GPU is GTX 1070, Ethash real value : 26 MH/s, Equihash real value : 4-500 sol/s.

Phoenix and Bminer do not have an API so NPlusMiner has to use the Wrapper. The wrapper is interpreting comma as a thousand separator (US style).
I guess your OS is not set to US and you use a different thousand separator which leads to misinterpretation by the Wrapper.

Try to change your OS locale to US, this should fix it.

[k2laci]

Fro Blockmasters.co YesscryptR16 unit : mBTC/kH/day,

This is real ?

Newest 4.2.2 version.

This is a pool issue, Blockmasters API is reporting wrong estimations for YesscryptR16. (been like this for days)
Nothing we can do about on our side. Try to contact them to get it fixed.
Use another pool in the meatime or disalble YescryptR16 in algo list.

https://github.com/MrPlusGH/NPlusMiner/issues/94


MrPlus

[MrPlus]

Fro Blockmasters.co YesscryptR16 unit : mBTC/kH/day,

This is real ?

Newest 4.2.2 version.

This is a pool issue, Blockmasters API is reporting wrong estimations for YesscryptR16. (been like this for days)
Nothing we can do about on our side. Try to contact them to get it fixed.
Use another pool in the meatime or disalble YescryptR16 in algo list.

https://github.com/MrPlusGH/NPlusMiner/issues/94


MrPlus

Again, their API returns wrong results:

Zergpool:
{"name":"yescryptR16","port":6333,"coins":2,"fees":0.5,"hashrate":231997,"workers":154,"estimate_current":"0.00004708","estimate_last24h":"0.00005120","actual_last24h":"0.02011","mbtc_mh_factor":0.001,"hashrate_last24h":158594.625}}
Blockmasters:
{"name":"yescryptR16","port":6333,"coins":2,"fees":0.25,"hashrate":55943,"workers":138,"estimate_current":0.0438727372,"estimate_last24h":"0.04623037","actual_last24h":"0.03379","mbtc_mh_factor":0.001,"hashrate_last24h":55090.6042,"estimate_old":0.0438727372}}

API is here:
   http://blockmasters.co/api/status

Their thread is here, you might wanna post to get it fixed:
   https://bitcointalk.org/index.php?topic=2362982.0
And their discord:
   https://discord.gg/RNnVAB4

MrPlus