NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching

[Oger]

Good afternoon. Is it possible to automatically switch AutoBurner profiles when switching the algorithm?

[jazz1984]

Good afternoon. Is it possible to automatically switch AutoBurner profiles when switching the algorithm?

Hi. Read file readme.md:
Ability to run a batch prior switching to a specific algo.
  For example, can be used to set per algo OC via nvidiaInspector
  Simply create a file named <AlgoName>.bat in prerun folder
  If <AlgoName>.bat does not exist, will try to launch prerun/default.bat
  
MSI Afterburner store profiles info in *.cfg files, if you can export it  somehow to *.bat files than yes, else use nvidia inspector.

[r1pst4rt]

How do add new algo's?  BCD is on Zergepool!!!

[jazz1984]

Hello Nplus. I really like your program, but I would very much like to see some kind of check on the presence of a hashrate at the miner, if there is not a hashrate for a certain time, it is necessary for the program to restart the miner. It can also be implemented simply by forcefully restarting the miner after a certain time, for example, every hour, or let it be a variable that can be changed through the interface, but the first option is preferable. Thank you.

[U4guk]

Этa пpoгpaммa бoльшe нe бyдeт oбнoвлятьcя?

[U4guk]

MrPlus, you can make an alternative version of the program Nemosminer, but with cuda9.2? Because it works better then cuda10.

[MrPlus]

Released NPlusMiner 4.4.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.4.2

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup
This is a very minimal release which will update the AutoUpdate code to prepare for next updates.

   - Check for min required NVIDIA driver version in AutoUpdate
   - Remove ZergPool pool files and BrainPlus files
   - Replace Zergpool by Zpool if still found in config

Following updates will be postponed for a little so client get time to get the AutoUpdate.

Following version will require NVIDIA drivers update. So AutoUpdate will only install if the proper version is installed.

[MrPlus]

Released NPlusMiner 4.5.2
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.2

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

   - Almost all miners updated to latest version. Re-benchmark is recommended.
   - Added suport for Dedal and ZHash
   - Earning Tracker code reviewed and optimized.
      - Now only one worker covers all pools
      - Better performances and memory management
      - Earnings Tracker now gets some memory and won't reset on restarts
         - Note that it only records while NPlusMiner is running. So it will miss data if not running for long.
   - Introducing graphical display of last seven day earnings
   - Introducing graphical display of current earnings per pool
   - Added NLPool support

[MrPlus]

Released NPlusMiner 4.5.3
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.3

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

   - Updated miner file for Ccminer YescryptR32 to account for stale shares in estimations
      - More accurate estimations
   - Updated xmr-stack to 2.7.0
      - Takes 2% dev fee into account
   - Fixed PhiPhiPool
      - In BrainPlus
     - In Earnings Tracker

[cryptomoblo]

I get an error saying updated driver is required (for newest version) while I have installed most recent drivers. Any idea what can be wrong?

[MrPlus]

I get an error saying updated driver is required (for newest version) while I have installed most recent drivers. Any idea what can be wrong?

Which version are you using?
Just check code and it should be OK if you have anything above 416.34

[MrPlus]

Released NPlusMiner 4.5.4
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.4

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

   - Added per pool Algo selection feature (Advanced users)
      - Allows include or exclude Algo per pool
      - You can now mine specific Algo on specific pool
      - Usefull when a pool has some interesting algo but lacks hashrate on others
      - ie. Enable PhiPhiPoolPlus but only mine x21s on it
      - Use Per pool config fine as described here: https://github.com/MrPlusGH/NPlusMiner/blob/master/README.md
      - Algo list works the same way as in the main configuration window ("+" for inclusion, "-" for exclusion)
      - Be careful with json formatting
   - Miners updates
      - TRex 0.8.5
      - CryptoDregde 0.13
   - Pools updates
      - Fixed worker name on PhiPhiPool
      - Fixed location selection on PhiPhiPool

[MrPlus]

Released NPlusMiner 4.5.4
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.4

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

   - Added per pool Algo selection feature (Advanced users)
      - Allows include or exclude Algo per pool
      - You can now mine specific Algo on specific pool
      - Usefull when a pool has some interesting algo but lacks hashrate on others
      - ie. Enable PhiPhiPoolPlus but only mine x21s on it
      - Use Per pool config fine as described here: https://github.com/MrPlusGH/NPlusMiner/blob/master/README.md
      - Algo list works the same way as in the main configuration window ("+" for inclusion, "-" for exclusion)
      - Be careful with json formatting
   - Miners updates
      - TRex 0.8.5
      - CryptoDregde 0.13
   - Pools updates
      - Fixed worker name on PhiPhiPool
      - Fixed location selection on PhiPhiPool

For x21s only on PhiPhiPool, you can find an example config file in the Config folder: PoolsConfig-x21sOnPhiPhi.json
Adjust parameters and rename to PoolsConfig.json.

[MrPlus]

Released NPlusMiner 4.5.4
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.4

NPlusMiner with GUI and AutoUpdate

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

   - Added per pool Algo selection feature (Advanced users)
      - Allows include or exclude Algo per pool
      - You can now mine specific Algo on specific pool
      - Usefull when a pool has some interesting algo but lacks hashrate on others
      - ie. Enable PhiPhiPoolPlus but only mine x21s on it
      - Use Per pool config fine as described here: https://github.com/MrPlusGH/NPlusMiner/blob/master/README.md
      - Algo list works the same way as in the main configuration window ("+" for inclusion, "-" for exclusion)
      - Be careful with json formatting
   - Miners updates
      - TRex 0.8.5
      - CryptoDregde 0.13
   - Pools updates
      - Fixed worker name on PhiPhiPool
      - Fixed location selection on PhiPhiPool

For x21s only on PhiPhiPool, you can find an example config file in the Config folder: PoolsConfig-x21sOnPhiPhi.json
Adjust parameters and rename to PoolsConfig.json.

All of these will come to NemosMiner in a few days. Just need to find the time to update code there.

[InfiniteImp]

Ok, @MrPlus, continuing our discussion from the other forum...

The cause of the focus stealing is the Start-SubProcess function in Include.ps1.  I compared Nemo's and yours and his has a load more code in it, plus the give-away comment "// http://www.daveamenta.com/2013-08/powershell-start-process-without-taking-focus/" 
I copied his routine into your Include.ps1 and testing it now.  It definitely works in that it does not take the focus away - I'm just waiting to see if it introduces any other issues.

[MrPlus]

Ok, @MrPlus, continuing our discussion from the other forum...

The cause of the focus stealing is the Start-SubProcess function in Include.ps1.  I compared Nemo's and yours and his has a load more code in it, plus the give-away comment "// http://www.daveamenta.com/2013-08/powershell-start-process-without-taking-focus/" 
I copied his routine into your Include.ps1 and testing it now.  It definitely works in that it does not take the focus away - I'm just waiting to see if it introduces any other issues.

Thanks you.
Will be in next version. With could other things.

+MrPlus

[Wicki-Mining]

Hello...
who has a valid discord link from phi-phi-pool for me?
On the side is just an expired discord invitation and I would like to have my coins paid out
greetings to all

[MrPlus]

Hello...
who has a valid discord link from phi-phi-pool for me?
On the side is just an expired discord invitation and I would like to have my coins paid out
greetings to all

Don't have that sorry.
If you find it, please let us know

+MrPLus

[InfiniteImp]

Thanks you.
Will be in next version. With could other things.

+MrPlus

Sorry for the delay in porting back.  Now that it's been running I can say that it's largely ok with the focus stealing code in place BUT I am now seeing the "Failed:" indicator showing in relation to ccminer.  That's the only miner I've seen that has an issue with the new code.  What it leaves me with is ccminer and cryptodredge running at the same time (with cryptodredge being the one which should be running).  I terminate ccminer and move on.  If you could figure out that issue, it would be perfect.


Here's what I'm seeing right now:


Running:

     Speed Started  Active   Cnt Command
     ----- -------  ------   --- -------
18.43 MH/s 00:02:51 01:05:17 24  Bin\NVIDIA-CryptoDredge\CryptoDredge.exe  --api-type ccminer-tcp --no-color
                                 --intensity 6 --cpu-priority 5 --no-crashreport --no-watchdog -r -1 -R 1 -b
                                 127.0.0.1:4068 -d 0 -o stratum+tcp://hmq1725.mine.blazepool.com:3747 -u
                                 <mywalletaddr> -p ID=MainPC,c=BTC -a hmq1725

Failed:  2

 Speed Exited   Active   Cnt  Command
 ----- ------   ------   ---  -------
0  H/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-Alexis78v1.4\ccminer.exe -b 4068 -R 1 -a skein -o
                              stratum+tcp://skein.mine.blazepool.com:4933 -u <mywalletaddr>
                              -p ID=MainPC,c=BTC -i 28 -N 1 -d 0
0  H/s dd:hh:mm 00:00:18 4    Bin\NVIDIA-Alexis78v1.4\ccminer.exe -b 4068 -R 1 -a keccakc -o
                              stratum+tcp://keccakc.mine.blazepool.com:5134 -u
                              <mywalletaddr> -p ID=MainPC,c=BTC -N 1 -i 29 -d 0

[MrPlus]

Thanks you.
Will be in next version. With could other things.

+MrPlus

Sorry for the delay in porting back.  Now that it's been running I can say that it's largely ok with the focus stealing code in place BUT I am now seeing the "Failed:" indicator showing in relation to ccminer.  That's the only miner I've seen that has an issue with the new code.  What it leaves me with is ccminer and cryptodredge running at the same time (with cryptodredge being the one which should be running).  I terminate ccminer and move on.  If you could figure out that issue, it would be perfect.


Here's what I'm seeing right now:


Running:

     Speed Started  Active   Cnt Command
     ----- -------  ------   --- -------
18.43 MH/s 00:02:51 01:05:17 24  Bin\NVIDIA-CryptoDredge\CryptoDredge.exe  --api-type ccminer-tcp --no-color
                                 --intensity 6 --cpu-priority 5 --no-crashreport --no-watchdog -r -1 -R 1 -b
                                 127.0.0.1:4068 -d 0 -o stratum+tcp://hmq1725.mine.blazepool.com:3747 -u
                                 <mywalletaddr> -p ID=MainPC,c=BTC -a hmq1725

Failed:  2

 Speed Exited   Active   Cnt  Command
 ----- ------   ------   ---  -------
0  H/s dd:hh:mm 00:00:00 Once Bin\NVIDIA-Alexis78v1.4\ccminer.exe -b 4068 -R 1 -a skein -o
                              stratum+tcp://skein.mine.blazepool.com:4933 -u <mywalletaddr>
                              -p ID=MainPC,c=BTC -i 28 -N 1 -d 0
0  H/s dd:hh:mm 00:00:18 4    Bin\NVIDIA-Alexis78v1.4\ccminer.exe -b 4068 -R 1 -a keccakc -o
                              stratum+tcp://keccakc.mine.blazepool.com:5134 -u
                              <mywalletaddr> -p ID=MainPC,c=BTC -N 1 -i 29 -d 0

Are you saying ccminer is running as well and mining?
Or does it just fail to run?

Could you try to run the ccminer command line in a command prompt and report the error you get?

+MrPlus