Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver 1.28).

[jugger1028]

I have a rig of 6 x 2080.

The good thing is that it is worth less than the 1080ti 2 months ago, and that its maximum TDP is 210W instead of the 250W of the 1080ti, matching performance, which will eventually improve as the mining software does.

I thought the 2080 was barely faster than the 1080 ti and near $1k? I've seen 1080 ti's going for near $750, no? I'm not sure the new cards are worth buying with AMD coming out with the 670/680 series for much less money.

[1550372399]

1550372399

[1550372399]

1550372399

[1550372399]

1550372399

[1550372399]

1550372399

[cel1697i845]

RTX 2080 Zealot/Enemy quick test 1.21a vs 1.22
https://youtu.be/XyZbuCeLv8Y

[Vispilio]

Hi, do you recommend manually setting difficulty for icemining pool, or any other particular recommendations for this pool ?..

also how do you set the failover pool to the 2nd icemining address if the EU fails ?..

[Patrik99]

I've been running 4x GPUs (3x 1070s and 1x 1070Ti) for days with 1.20 and had no issues. I had some strange errors with 1.21 with low hashrates and so went back to 1.20.

For 1.20 I ran with intensity 21 and 120watts on all 4 without any issues. memory was at -500 although some said to do -502 which im not sure why. And core voltage is up to 140 I think, ill have to double check on that.

Each card is running between 61-65C and I've yet to see it crash on 1.20. My total wattage is around 500-535 which I'll take anyday over 850watts. Electricity these days are freakin expensive in California.

I've ran this setup on ubuntu 16.04, 18.04 server and desktop variations, mint 18 and now running it on mint 19 and it's solid. I'll try 1.22 and give an update in about 24 hours.

[cryptotamer01]

When will you add x22i algo to your miner?

[logicalray77]

Hi,

Does this miner support Nicehash?
if so what would the start bat look like?

[Divinity666]

There tons cmd-files in the directory - use them as an example, just replace server and your wallet addresses

[Patrik99]

-Update-

So after a day or so, I have to admit it's a bit faster than 1.20. For version 1.20, Consistently I've been getting maybe 11-13 mh/s on the 1070s upwards to about 15 mh/s on the 1070ti.

With ver1.22 I'm getting 13-15 mh/s on the 1070s and upwards up to 15-20 mh/s on the 1070ti and these are all undervoltage to about 67%.

Total hash output is 58-84 mh/s on version 1.20 and total hash output on 1.22 is anywhere from 64-110 mh/s. Of course with x16r it's very unpredictable but I haven't had any crashes yet on Mint 19 with nvidia 390.48 drivers + Cuda 9.1 and I'm pretty happy with the results, thanks Dk & Zealot/Enemy good stuff!

[hrunya102]

The new version showed a steady increase, i updated the driver and now everything works well, thank you.

[logicalray77]

There tons cmd-files in the directory - use them as an example, just replace server and your wallet addresses

Thanks I manage to figure it out.

[logicalray77]

what intensity should we use with 1050ti 4Gb?

[PetriJuhani]

what intensity should we use with 1050ti 4Gb?

https://i.uppaa.fi/2018/10/15/kuva7fe5e2f7e2b54904.jpg

[PetriJuhani]

Hi
Is dev mining time this long now?
https://i.uppaa.fi/2018/10/15/kuva2a8d7b562c5214a76.jpg

[mypikachu]

How to install nvidia driver 415 for Linux?

https://www.nvidia.com/Download/index.aspx only has v390.


sudo add-apt-repository ppa:graphics-drivers
sudo apt-get update
sudo apt-get install nvidia-415

Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package nvidia-415

[konqueror]

How to install nvidia driver 415 for Linux?

https://www.nvidia.com/Download/index.aspx only has v390.

Try:

Code:

sudo apt-get install nvidia-410

[1033ruben]

hello to all i have a quick a question and it is, is there a way to mine with just one gpu when sing this miner. you see i currently have my rig with 2 1080ti's but i would like to game a bit f at all possible so hece my question how to set it to mine with just one of the gpu's here is my config file.
 {
    "quiet" : true,
    "debug" : false,
    "protocol" : false,
    "no-cpu-verify" : true,
    

    "algo" : "x16r",
    "intensity" : "20",


    
    "url" : "stratum+tcp://x16r.usa.nicehash.com:3366",
    "user" : "37Uy5Bau3mSv7gN4dt7YnBDg88tX8GZs1H.RCLR",
    "retry-pause" : "6",
    "pass" : "x"
}
thanks in advance
Ruben

[Yuriy909]

-Update-

So after a day or so, I have to admit it's a bit faster than 1.20. For version 1.20, Consistently I've been getting maybe 11-13 mh/s on the 1070s upwards to about 15 mh/s on the 1070ti.

With ver1.22 I'm getting 13-15 mh/s on the 1070s and upwards up to 15-20 mh/s on the 1070ti and these are all undervoltage to about 67%.

Total hash output is 58-84 mh/s on version 1.20 and total hash output on 1.22 is anywhere from 64-110 mh/s. Of course with x16r it's very unpredictable but I haven't had any crashes yet on Mint 19 with nvidia 390.48 drivers + Cuda 9.1 and I'm pretty happy with the results, thanks Dk & Zealot/Enemy good stuff!

What is your TDP?

[Yuriy909]

what intensity should we use with 1050ti 4Gb?

What is your TDP, memory and core?
version of the program and driver?

[Patrik99]

-Update-

So after a day or so, I have to admit it's a bit faster than 1.20. For version 1.20, Consistently I've been getting maybe 11-13 mh/s on the 1070s upwards to about 15 mh/s on the 1070ti.

With ver1.22 I'm getting 13-15 mh/s on the 1070s and upwards up to 15-20 mh/s on the 1070ti and these are all undervoltage to about 67%.

Total hash output is 58-84 mh/s on version 1.20 and total hash output on 1.22 is anywhere from 64-110 mh/s. Of course with x16r it's very unpredictable but I haven't had any crashes yet on Mint 19 with nvidia 390.48 drivers + Cuda 9.1 and I'm pretty happy with the results, thanks Dk & Zealot/Enemy good stuff!

What is your TDP?

My average temperature for all 4 gpu's on average is around 59-64 celsius. 2 of them are set @ 60% fan speed and the rest are automatic. For intensity I have all of them at -i 21 without any issues whatsoever. I'm really liking 1.22 more than 1.20 now. One of these days I'm gonna try a headless server setup because Mint 19 seems a bit bloated for my tastes but the easability for installation is a breeze!

[miner970gtx]

No more 10$ day?some advice?