Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin).

[devivier]

hello I just tested on my rtx card 2060 and 1060 it works very well but consumes 27% on cpu
pending an improvement I go back to trex-miner who resolved the problem

[@enemy]

Z-ENEMY 2.4  From: Dk & Enemy (z-enemy)

Changes:
-  Fixed high CPU load with latest nVidia drivers, you can expect higher hashrate on the mining rigs with lower end CPUs
-  Fixed nvml.dll load error with latest nVidia drivers

Windows:
Cuda 10.1: https://mega.nz/#!UXRBCChJ!v7JqOCuvq4hl1XR76BGiC75Gq97vKSliuH2uKZvU1iQ
Cuda 10.0: https://mega.nz/#!FeRFFI7I!mUM5RlXgm6R8KcIM3tgBPAWpm57MNdJAuvGEOHazMtA
Cuda  9.2: https://mega.nz/#!kTQDFS4Z!lEEpf9nkFg6a-et3a4iuvmg7EKW1h5yH4V_NZ0q7AsI
Cuda  9.1: https://mega.nz/#!wGQjGIQa!8el0tsYJ40BeC6dz5S5h-GTOMjgUjCWYPi_QEldhuUY

Linux (libcurl3/ubuntu 16.04):
Cuda 10.0: https://mega.nz/#!NS4VVQhC!vDVQho4IoNvHKqh-qiPPWYIdVA3dO9Yq9xP4EQN4g0c
Cuda  9.2: https://mega.nz/#!tfoBwYYA!XwVifHgcnm2bT4y0Q42j1JUhk26tcmVY8DrHhfwwEao
Cuda  9.1: https://mega.nz/#!YbhnwCZQ!gdcTaAtbbgOiC2VPdYdHYAyFBuDASEMI8_G-AYJsocU

Linux (libcurl4/ubuntu 18.04):
Cuda 10.0:  https://mega.nz/#!NCwjWKQD!miU0Y1uzBv_24OogPVJ0dHzHd4i8oMK8Bo9YQ8KtHN0
Cuda 10.1: https://mega.nz/#!AKgxyQ6R!d3JORUWCN2c1ejcqe9B9VYtNK3WO8jHjL2RVEsiKexQ

[styleshifter]

It's great that you released a new version.
Can you update your GitHub repository, too?

[scryptr]

It's great that you released a new version.
Can you update your GitHub repository, too?

GITHUB IS MORE ACCESSIBLE FROM LINUX:

Github can be accessed simply from command line Linux. Previously, prior to your GitHub site, I had to update each of my headless Linux boxes from my Windows work box.  The GitHub site is much appreciated.

I believe that the Russian FTP site still features version 1.28.       --scryptr

[JuanPabloCuervo]

Zealot/Enemy (z-enemy) NVIDIA GPU miner.
x16rv2, x16r, x16s, Bitcore, Phi1612, Xevan ,Tribus , x17, c11, AeriumX, XDNA(hex), phi, phi2, skunk etc ..
=========================================================

Z-ENEMY 2.4  From: Dk & Enemy (z-enemy)  NEW

IMPORTANT:
For maximum performance make sure you have latest drivers
http://www.nvidia.com/Download/index.aspx
_______________________________________________________________________________ _____________________

Windows:
Cuda 10.0(For 10x0 & 20x0 cards, new drivers ver 411+):
Cuda 9.2 (For 10x0 cards and drivers over ver 397+):
Cuda 9.1 (For 10x0 cards and drivers over ver 388+):

I have 1 problem with all the miners ive tested...

#1. this miner does Not have GitHub page to properly comment in the Issues Tab.
#2. i have a GTX Titan 6GB, i want to test...
#3. latest Nvidia driver that fully works for W8.1 or W7 is v388.71, all modern drivers have CUDA 64-Bit broken,
tested with CUDA-Z, GPU-Z, GPU-Capsviewer, etc...
"i dont have W10, i havent tested, but probably is the same."
#4. GTX Titan 6GB is a GTX 700 series, GK110 GPU has Compute Capability v3.5
https://en.wikipedia.org/wiki/CUDA
CUDA SDK 9.0 – 9.2 support for compute capability 3.0 – 7.2 (Kepler, Maxwell, Pascal, Volta)
CUDA SDK 10.0 – 10.2 support for compute capability 3.0 – 7.5 (Kepler, Maxwell, Pascal, Volta, Turing). Last version with support for compute capability 3.x (Kepler). 10.2 is the last official release for macOS, as support will not be available for macOS in newer releases.
#5. No GPU miner tested so far, None works, all say: Compute Capability Not Supported.

i know GTX1060 is the same and eats less power, but... still i want to test Nvidia drivers with & without Double Precision, just for curiosity.

[@enemy]

New version miner ready (x16rv2 > kawpow )  and will be released  before the Ravencoin hard fork 6th May .

[@enemy]

Z-ENEMY 2.5  From: Dk & Enemy (z-enemy)

Changes:
- Added kawpow algo (Upcoming Ravencoin hardfork)

https://github.com/zealot-rvn/z-enemy/releases/tag/kawpow

_____________________________________
First time or troubleshooting kawpow:
-   First time users - all ver. 2.02+ works on Cuda 9.x &Cuda 10.x and it is recommended to make sure you've updated your NVIDIA drivers. You can find drivers here: http://www.nvidia.com/Download/index.aspx ver., min  ver.398+++
-   Next important thing is intensity. We recommend intensity -19 or 20,(21 for 20x0) at first.
-   kawpow algo using +mem , but use no OC at first until you verify stability..
_____________________________________

Windows:
Cuda 10.1: https://mega.nz/file/oeZnBSDL#TvzpemNq1HeJdA4jTBONpVcY9ZdWX6WSYWjWXMP2AEQ
Cuda 10.0: https://mega.nz/file/UW4TzBbb#II_haTo5D4clf5rmj82AMkDdrjoOTyWBiHqHIaLAjXY
Cuda  9.2: https://mega.nz/file/FCgBmD7K#t49rrzJxPj2cTDFMMgqYs5a6cncCPVjzSIZ2Ykr2KL4
Cuda  9.1: https://mega.nz/file/xKpXgBgB#JtbOd9fmBAmVoLiau6Bt2gpLl1hII93XdwIRFz8OI18

Linux (libcurl3/ubuntu 16.04):
Cuda 10.0: https://mega.nz/file/ce5z1QCZ#hYFJqeKNC-F12AKIccWijgKlcPtbkqrpp3ysRpovGxk
Cuda  9.2: https://mega.nz/file/FSoT3Awa#U4dKJXz1w4IGckh9kj67ri-oWYI1ouZNODDzvWY5z9Q
Cuda  9.1: https://mega.nz/file/Rb4z0IZQ#3dfh7s0r7obkTXB456vB5te4AJQ74d3YZ-yCPn15vrc

Linux (libcurl4/ubuntu 18.04):
Cuda 10.1: https://mega.nz/file/1S4ByIqa#gJCeWTCeS3ancfar_NW-nvqxnZkFF8P1vVaztRpxRyU
Cuda 10.0: https://mega.nz/file/FbwnBIJa#FJkIIxRCgIsIf8DdIk8ZWEmqL6ojwXpQEMgZmFZBro4
Cuda  9.2: https://mega.nz/file/hHgXiALI#syfbi4c8PlBku123fgV2G_8TzriSDyLmOnLIt1xfhJ4

[sxemini]

Z-ENEMY 2.5  From: Dk & Enemy (z-enemy)

Changes:
- Added kawpow algo (Upcoming Ravencoin hardfork)

https://github.com/zealot-rvn/z-enemy/releases/tag/kawpow

_____________________________________
First time or troubleshooting kawpow:
-   First time users - all ver. 2.02+ works on Cuda 9.x &Cuda 10.x and it is recommended to make sure you've updated your NVIDIA drivers. You can find drivers here: http://www.nvidia.com/Download/index.aspx ver., min  ver.398+++
-   Next important thing is intensity. We recommend intensity -19 or 20,(21 for 20x0) at first.
-   kawpow algo using +mem , but use no OC at first until you verify stability..
_____________________________________

Windows:
Cuda 10.1: https://mega.nz/file/oeZnBSDL#TvzpemNq1HeJdA4jTBONpVcY9ZdWX6WSYWjWXMP2AEQ
Cuda 10.0: https://mega.nz/file/UW4TzBbb#II_haTo5D4clf5rmj82AMkDdrjoOTyWBiHqHIaLAjXY
Cuda  9.2: https://mega.nz/file/FCgBmD7K#t49rrzJxPj2cTDFMMgqYs5a6cncCPVjzSIZ2Ykr2KL4
Cuda  9.1: https://mega.nz/file/xKpXgBgB#JtbOd9fmBAmVoLiau6Bt2gpLl1hII93XdwIRFz8OI18

Linux (libcurl3/ubuntu 16.04):
Cuda 10.0: https://mega.nz/file/ce5z1QCZ#hYFJqeKNC-F12AKIccWijgKlcPtbkqrpp3ysRpovGxk
Cuda  9.2: https://mega.nz/file/FSoT3Awa#U4dKJXz1w4IGckh9kj67ri-oWYI1ouZNODDzvWY5z9Q
Cuda  9.1: https://mega.nz/file/Rb4z0IZQ#3dfh7s0r7obkTXB456vB5te4AJQ74d3YZ-yCPn15vrc

Linux (libcurl4/ubuntu 18.04):
Cuda 10.1: https://mega.nz/file/1S4ByIqa#gJCeWTCeS3ancfar_NW-nvqxnZkFF8P1vVaztRpxRyU
Cuda 10.0: https://mega.nz/file/FbwnBIJa#FJkIIxRCgIsIf8DdIk8ZWEmqL6ojwXpQEMgZmFZBro4
Cuda  9.2: https://mega.nz/file/hHgXiALI#syfbi4c8PlBku123fgV2G_8TzriSDyLmOnLIt1xfhJ4

Are you planning more updates in the future? in the past you said gpu mining is dead and now a new version?

[styleshifter]

I'm very happy that you read my comment and updated your GitHub repository! 
But why did you create a new repository?
Because of this I wasn't notified about the new release.
I updated the link to your miner in my app.

[PumpCoinDev]

Please help!

Why in GTX 980 Ti have only 2.5Mh/s? Last drivers, last z-enemy miner

https://i.ibb.co/34jRf0Z/image.png

[@enemy]

Z-ENEMY 2.6.1  From: Dk & Enemy (z-enemy)

Bugfixes:
- Fixed broken non-kawpow algos in version 2.6

Version 2.6

Kawpow (RavenCoin):
- Faster initialization on multi-gpu rigs
- Performance improvements (few percent)
- Smoother gpu/power load
- Default intensity value increased from 20 to 21 for gtx 1070/1080 series

Misc:
- GPU reports are now grouped together
- Average hashrate is no longer displayed incorrectly low when the miner starts up.
- Added average shares/min reports
- You can now use environment variables in your config files (%ADDR% and so on)
- Default pause time between reconnection attempts is now 10 seconds

GitHub : https://github.com/zealot-rvn/z-enemy/releases/tag/kawpow261

[UselessGuru]

Z-ENEMY 2.6.1  From: Dk & Enemy (z-enemy)

Bugfixes:
- Fixed broken non-kawpow algos in version 2.6

Version 2.6

Kawpow (RavenCoin):
- Faster initialization on multi-gpu rigs
- Performance improvements (few percent)
- Smoother gpu/power load
- Default intensity value increased from 20 to 21 for gtx 1070/1080 series

Misc:
- GPU reports are now grouped together
- Average hashrate is no longer displayed incorrectly low when the miner starts up.
- Added average shares/min reports
- You can now use environment variables in your config files (%ADDR% and so on)
- Default pause time between reconnection attempts is now 10 seconds

GitHub : https://github.com/zealot-rvn/z-enemy/releases/tag/kawpow261

Error Epoch calculation failed

Code:

z-enemy.exe -b 4068 -d 0 -R 1 -q -a kawpow -o stratum+tcp://europe.kawpow-hub.miningpoolhub.com:17030 -u ****************.******* -p x -i 23
[INFO   ] 20/05/15 16:18:10 zealot/enemy-2.6.1 miner (64 bit)
[INFO   ] 20/05/15 16:18:10 NVIDIA CUDA 10.1
[INFO   ] 20/05/15 16:18:10 Dev fee is 1.0%
[NOTICE ] 20/05/15 16:18:10 MAIN POOL----------------------------------------------
[NOTICE ] 20/05/15 16:18:10 URL : stratum+tcp://europe.kawpow-hub.miningpoolhub.com:17030
[NOTICE ] 20/05/15 16:18:10 USER: ****************.*******
[NOTICE ] 20/05/15 16:18:10 PASS: x
[NOTICE ] 20/05/15 16:18:10 -------------------------------------------------------
[NOTICE ] 20/05/15 16:18:10 FAILOVER POOLs-----------------------------------------
[NOTICE ] 20/05/15 16:18:10 NONE
[NOTICE ] 20/05/15 16:18:10 -------------------------------------------------------
[NOTICE ] 20/05/15 16:18:10 Starting on stratum+tcp://europe.kawpow-hub.miningpoolhub.com:17030
[INFO   ] 20/05/15 16:18:10 Mining 'kawpow' with 1 thread.
[INFO   ] 20/05/15 16:18:10 HTTP API server started: http://127.0.0.1:4067
[ERROR  ] 20/05/15 16:18:11 Epoch calculation failed

[@enemy]

Z-ENEMY 2.6.2  From: Dk & Enemy (z-enemy)

Changes:
- Fixed compatibility with Nicehash, Miningpoolhub and some other pools ("epoch initialization failed" error).
- Fixed crash while trying to load json config files in Ubuntu 16 based distributions (HiveOS 4)
- Temporarily disabled environment variables in json config files in Ubuntu 16 based distributions (HiveOS 4)

GitHub: https://github.com/zealot-rvn/z-enemy/releases/tag/kawpow262

[kibirai]

Hi, can somebody explain me why I'm getting a not full accepted share?
A: means accepted and R: refused ?

Example: Share 79 (A:98.73%, R:1,27%), Diff:1.648, 22.29MH/s, 45ms - OK

https://i.ibb.co/YfwMBXp/zenemy-error.jpg

Thanks.

[Wotan Wipeout]

Might be too much OC.
Try another miner like T-Rex.
If you get same rejects lower oc.
1.62kh/watt seems a bit too high for me.
I am under 1.6kh/w, even on 2080 rigs.


20200708 06:37:50 kawpow epoch: 174, block: 1309571, period: 436523, diff: 0.337 = 1.60 Gh
20200708 06:38:05 [ OK ] 15219/15246 - 105.73 MH/s, 16ms
20200708 06:38:13 [ OK ] 15220/15247 - 105.74 MH/s, 16ms
20200708 06:38:21 [ OK ] 15221/15248 - 105.76 MH/s, 16ms
20200708 06:38:45 [ OK ] 15222/15249 - 105.85 MH/s, 16ms
20200708 06:38:53 kawpow epoch: 174, block: 1309572, period: 436524, diff: 0.337 = 1.60 Gh
20200708 06:38:58 kawpow epoch: 174, block: 1309573, period: 436524, diff: 0.337 = 1.60 Gh
20200708 06:39:53 [ OK ] 15223/15250 - 105.46 MH/s, 15ms
20200708 06:39:53 GPU #0: RTX 2070 SUPER - 20.88 MH/s, [T:69C, P:138W, F:33%, E:151kH/W]
20200708 06:39:53 GPU #1: RTX 2070 SUPER - 21.71 MH/s, [T:70C, P:139W, F:50%, E:157kH/W]
20200708 06:39:53 GPU #2: RTX 2070 SUPER - 21.28 MH/s, [T:68C, P:138W, F:39%, E:154kH/W]
20200708 06:39:53 GPU #3: RTX 2070 SUPER - 20.99 MH/s, [T:64C, P:139W, F:31%, E:152kH/W]
20200708 06:39:53 GPU #4: RTX 2070 SUPER - 20.59 MH/s, [T:63C, P:138W, F:55%, E:148kH/W]
20200708 06:39:53 Shares/min: 3.448 (Avr. 3.611); total rejected: 0.177%, Avr.Power: 691W, Avr.Efficiency: 153kH/W
20200708 06:39:53 Uptime: 2 days 22 hours 15 mins 25 secs | Algo: kawpow | T-Rex v0.15.8
20200708 06:40:07 [ OK ] 15224/15251 - 105.40 MH/s, 15ms

20200708 06:38:46 [ OK ] 28742/28837 - 133.77 MH/s, 15ms
20200708 06:38:53 kawpow epoch: 174, block: 1309572, period: 436524, diff: 0.775 = 3.20 Gh
20200708 06:38:59 kawpow epoch: 174, block: 1309573, period: 436524, diff: 0.775 = 3.20 Gh
20200708 06:39:58 [ OK ] 28743/28838 - 132.66 MH/s, 15ms
20200708 06:40:13 kawpow epoch: 174, block: 1309574, period: 436524, diff: 0.775 = 3.20 Gh
20200708 06:40:40 kawpow epoch: 174, block: 1309575, period: 436525, diff: 0.775 = 3.20 Gh
20200708 06:41:02 [ OK ] 28744/28839 - 132.93 MH/s, 15ms
20200708 06:41:04 kawpow epoch: 174, block: 1309576, period: 436525, diff: 0.775 = 3.20 Gh
20200708 06:41:15 [ OK ] 28745/28840 - 133.09 MH/s, 15ms
20200708 06:41:15 GPU #0: ASUS RTX 2080 - 26.99 MH/s, [T:55C, P:169W, F:0%, E:160kH/W]
20200708 06:41:15 GPU #1: MSI RTX 2080 - 26.01 MH/s, [T:54C, P:168W, F:0%, E:155kH/W]
20200708 06:41:15 GPU #2: MSI RTX 2080 - 26.54 MH/s, [T:58C, P:169W, F:0%, E:157kH/W]
20200708 06:41:15 GPU #3: MSI RTX 2080 - 26.47 MH/s, [T:53C, P:169W, F:0%, E:157kH/W]
20200708 06:41:15 GPU #4: Gainward RTX 2080 - 27.07 MH/s, [T:53C, P:173W, F:0%, E:160kH/W]
20200708 06:41:15 Shares/min: 1.913 (Avr. 3.561); total rejected: 0.329%, Avr.Power: 844W, Avr.Efficiency: 158kH/W
20200708 06:41:15 Uptime: 5 days 14 hours 31 mins 7 secs | Algo: kawpow | T-Rex v0.15.8
20200708 06:42:18 [ OK ] 28746/28841 - 133.45 MH/s, 17ms

[kibirai]

Might be too much OC.
Try another miner like T-Rex.
If you get same rejects lower oc.
1.62kh/watt seems a bit too high for me.
I am under 1.6kh/w, even on 2080 rigs.

...

Yes, my bad. Was playing with OC and in some moment the miner didn't liked it. So it was registering bad shares even after resetting OC. I reopened the miner again and its stable now for 11 hours.

https://i.ibb.co/m0gK4JN/zenemy-ok.jpg

I was adjusting power limit last night, and i got 10W @ 1.5MH/s @ 3°C less.
Speaking about kH/W, I don't know if this is the software bad reading or my psu. But i can see strange spikes all over the place in miner software:
P:132-135W, E: 154-166kH/W

Like this one P:117W, 181.74kH/W
https://i.ibb.co/FxVdZM3/consumption.jpg

//offtopic
For now I'm just looking how all this thing works, using one RTX 2070s. I have "free" electricity, it comes included in my apartment fix rent bill. So I guess, 2-3 GPU rig, without sounding the alarms should be good.

[HFreeman]

Please message me here or on Discord kibirai .

[tbearhere]

Are 1060 3GB done ?

No....they can still mine many algo's.

[Sweminer777]

Can you add compute 2.1 for older graphics thanks

[drewspace]

Can you add some stuff from Nvidia Developer that accelerates your GPU? There is a memory bus that allows you to get 2x the performance out of your GPU. Tensor Cores aren't utilized at all. You have to call up specific functions just to turn them on and it has to be through a daemon processor. Then you have to use something like ML studio to change their floating-point integers into linear computer processing. I use the A100 to train my data, but I have of course been curious. I spent about 6 full days looking into it. It's too much for me. But if you can, you should try to get Tesla, A100, etc. 8 of the A100s had an ETHash rate of 1398MH/s