merc82 (OP)
|
|
June 21, 2014, 02:32:08 AM |
|
Here is another interesting entry under "Auto-Exchange batches"
status coin bloopidyboopsigh WAVE
seems legit
Enjoy the humor sometimes? WVS is a pretty bad coin in terms of design. Anything over 150 coins is failing due to 'Transaction Too Large' -- which means I'm having to manually send 150 coins at a time per batch we sell to an exchange.. to keep the autoexchange from trying to trade the coins before all the transactions confirm, I have to give it a different status.. thus the humor.. sorry if it caused any confusion
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
merc82 (OP)
|
|
June 21, 2014, 02:33:33 AM |
|
under "Autoexchange details" I have:
forked SUPER
does this mean I didn't get any coins?
same here but clearly super is just fine 2 other super pools were forked earlier that i know of. Check their thread. if what you say is true then thats the 4th fork caused by trademybit i have seen in 1 week. i cannot support such behavior any longer, the way they wave that 20g/h fork stick around is very dangerous and irresponsible i watched them drop almost 20g/h on logicoin a coin with a diff of 5 and fork it 2 times in the last week. We've removed LGC due to forking them, we've removed several coins to prevent forking them. SUPER can handle our hashrate, but there is some wallet issues with the code that is causing us to go off on our own fork at times. I've since resolved the issues.
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
Hueristic
Legendary
Offline
Activity: 3934
Merit: 5292
Doomed to see the future and unable to prevent it
|
|
June 21, 2014, 03:19:12 AM |
|
Enjoy the humor sometimes? those that don't get it need a visit from the BOFH.
|
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.”
|
|
|
Spacewide
Newbie
Offline
Activity: 38
Merit: 0
|
|
June 21, 2014, 06:43:25 AM |
|
Is there any way to configure my miner's difficulty? Mostly this happens by editing the password.
Best regards
|
|
|
|
bullus
|
|
June 21, 2014, 08:48:56 AM |
|
Glad I turned off my rig because of the low btc/day..too bad but need to even the powerbills to make some profits.
Don't know, Razorcoin did pretty good last night. Switched my miners to Scrypt before I went to bed and woke up with equivalent of one day hashing. Back to my X11/X13 switching but was nice to see that spike. For me it should be 2x more profit because of the powerdraw scrypt has between x11/x13.
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
DarkAGeS
|
|
June 21, 2014, 04:29:52 PM |
|
admins, do you understand that you have obsolete modificators for x11 and x13? with x11mod/x13mod lasybear miner with 14.6 driver we have about Scrypt*6 for x11 and Scrypt*4.7 for x13
|
|
|
|
Xenocyde
|
|
June 21, 2014, 08:46:42 PM |
|
Guys, how can I combine X11/X13 mining with Scrypt? Is there a dedicated scrypt port for sgminer 5? Right now I'm trying like this:
{ "pools" : [ { "url" : "stratum+tcp://am02.eu.trademybit.com:4010", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "darkcoin-mod", "name" : "TMB X11" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:4011", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "marucoin-mod", "name" : "TMB X13" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:4010", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "darkcoin-mod", "name" : "TMB X11" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:3330", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "zuikkis", "name" : "TMB Scrypt", "pool-intensity" : "13" } ]
Miner only sees X11/X13 pools though.
L.E.: Ah nevermind, it just changed to Scrypt... so it's working I guess.
|
|
|
|
bullus
|
|
June 21, 2014, 09:58:11 PM |
|
Guys, how can I combine X11/X13 mining with Scrypt? Is there a dedicated scrypt port for sgminer 5? Right now I'm trying like this:
{ "pools" : [ { "url" : "stratum+tcp://am02.eu.trademybit.com:4010", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "darkcoin-mod", "name" : "TMB X11" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:4011", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "marucoin-mod", "name" : "TMB X13" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:4010", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "darkcoin-mod", "name" : "TMB X11" }, { "url" : "stratum+tcp://am02.eu.trademybit.com:3330", "user" : "Xenocyde.1", "pass" : "4441", "algorithm" : "zuikkis", "name" : "TMB Scrypt", "pool-intensity" : "13" } ]
Miner only sees X11/X13 pools though.
L.E.: Ah nevermind, it just changed to Scrypt... so it's working I guess.
Are u sure, cause I think port 4010 or 4011 will never be dead both of them and switch to the failover scrypt port.
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
Xenocyde
|
|
June 21, 2014, 10:09:12 PM |
|
Yes, it's switching to Scrypt from time to time, don't know if ports are OK or profit-switching works as intended though. Do I need to put 4440 and 5550 for X11 and X13? What other settings would help? BTW I also added pool-intensity for each pool as Scrypt needs 13 and others need 18.
|
|
|
|
langes01x
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 22, 2014, 02:07:52 AM Last edit: June 23, 2014, 12:15:21 AM by langes01x |
|
I've created a piece of software that can monitor and switch algorithms supported by TradeMyBit on the fly using sgminer 5.0 that I have released to the general public. It will graph out profitability so you can visually see how each algorithm is doing and will automatically switch to the best algorithm. It also graphs out temperature and hash rate of each individual GPU, can display your coin balances and auto-exchange balances and allows you to stop mining when profitability is really low. Github repository here: https://github.com/Langes01x/TMB-SwitcherBinaries here: https://dl.dropboxusercontent.com/u/11805555/TMB%20switcher%20v1.0.zipDo note that this is only compatible with Windows. If you need assistance with setup or would like additional information you can generally find me idling in the #pool channel on irc.framper.com. Feedback would be greatly appreciated. Edit: Added screenshots on request: https://github.com/Langes01x/TMB-Switcher/wikiA separate thread has been created for discussion related to the switcher here: https://bitcointalk.org/index.php?topic=661827
|
|
|
|
n2nshad0w
Member
Offline
Activity: 78
Merit: 10
HashHard
|
|
June 22, 2014, 05:28:00 AM |
|
I've created a piece of software that can monitor and switch algorithms supported by TradeMyBit on the fly using sgminer 5.0 that I have released to the general public. It will graph out profitability so you can visually see how each algorithm is doing and will automatically switch to the best algorithm. It also graphs out temperature and hash rate of each individual GPU, can display your coin balances and auto-exchange balances and allows you to stop mining when profitability is really low. Github repository here: https://github.com/Langes01x/TMB-SwitcherBinaries here: https://dl.dropboxusercontent.com/u/11805555/TMB%20switcher%20v1.0.zipDo note that this is only compatible with Windows. If you need assistance with setup or would like additional information you can generally find me idling in the #pool channel on irc.framper.com. Feedback would be greatly appreciated. I've been testing this the last few hours and works very well, Thanks for sharing! You may want to consider starting your own thread.
|
|
|
|
|
merc82 (OP)
|
|
June 22, 2014, 06:47:13 AM |
|
admins, do you understand that you have obsolete modificators for x11 and x13? with x11mod/x13mod lasybear miner with 14.6 driver we have about Scrypt*6 for x11 and Scrypt*4.7 for x13
I am aware, its not yet widely used -- but once it is the modifiers will be updated
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
diks
Legendary
Offline
Activity: 2632
Merit: 1450
|
|
June 22, 2014, 09:55:32 AM |
|
JUG Auto-Exchange ??
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 22, 2014, 03:30:57 PM |
|
stratum pool1 eu isn't working
|
|
|
|
BitSmacker
Member
Offline
Activity: 84
Merit: 10
|
|
June 22, 2014, 03:46:02 PM Last edit: June 22, 2014, 04:27:21 PM by BitSmacker |
|
merc82, just fyi Re: Guerilla coinhttps://bitcointalk.org/index.php?topic=656167.0Update - 0205UTC 22/06/2014 Hello guys, thank you for your attention. We have had a fantastic launch! We have spent the last week developing features and improvements to the coin. The last 24 hours have produced unsettling conditions for miners causing us to act to preserve the fairness of our coin distribution. Due to very large amounts of suspicious and anonymous hashrate which cannot be attributed to any of of the pools we are making changes to the code and announcing a hard-fork.
You must download the new wallets immediately and spread this announcement. We are in the process of contacting pools and exchanges as we speak. heh, he doesn't have TMB listed as a pool and TMB has like 32GH/s right now. Wonder if that is the "suspicious and anonymous hashrate". Also noticed PoW blocks reduced from 10,000 to 6,000 blocks. So the party ends much sooner now. According to my calculations mining ends in about 12.6 hours.
|
|
|
|
merc82 (OP)
|
|
June 22, 2014, 07:10:22 PM |
|
JUG Auto-Exchange ??
Jug is not auto-exchanged -- this is the reason why its not on the multi-port
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
merc82 (OP)
|
|
June 22, 2014, 07:35:59 PM |
|
merc82, just fyi Re: Guerilla coinhttps://bitcointalk.org/index.php?topic=656167.0Update - 0205UTC 22/06/2014 Hello guys, thank you for your attention. We have had a fantastic launch! We have spent the last week developing features and improvements to the coin. The last 24 hours have produced unsettling conditions for miners causing us to act to preserve the fairness of our coin distribution. Due to very large amounts of suspicious and anonymous hashrate which cannot be attributed to any of of the pools we are making changes to the code and announcing a hard-fork.
You must download the new wallets immediately and spread this announcement. We are in the process of contacting pools and exchanges as we speak. heh, he doesn't have TMB listed as a pool and TMB has like 32GH/s right now. Wonder if that is the "suspicious and anonymous hashrate". Also noticed PoW blocks reduced from 10,000 to 6,000 blocks. So the party ends much sooner now. According to my calculations mining ends in about 12.6 hours. Thanks, we've updated to the latest version and updated our PoS cutoff
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
uberua
Member
Offline
Activity: 179
Merit: 10
|
|
June 22, 2014, 09:22:51 PM |
|
Can anyone answer what is wrong with settings when miner receives such rejects: sgminer.exe -k x13mod -o .............. --intensity 15 --thread-concurrency 32768 --lookup-gap 2 --worksize 256 -g 2 Thank you.
|
|
|
|
bullus
|
|
June 22, 2014, 10:04:32 PM |
|
Can anyone answer what is wrong with settings when miner receives such rejects: sgminer.exe -k x13mod -o .............. --intensity 15 --thread-concurrency 32768 --lookup-gap 2 --worksize 256 -g 2 Thank you. wrong stratum I think..which stratum do u use for x13? Port 5550?
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
|