[ANN] microCoin MRC - alcurEX - Scrypt-Jane - nFactor

[Wongi]

I can confirm that.

[1715626764]

1715626764

[1715626764]

1715626764

[minersbest]

Minersbest & Bansheroom is 100% legit.  I was able to withdraw my MCR from there no prob. I mine RAD coin there and also would not hesitate to mine any other coin from them!  A+

thank you ;-)

[mattbigblue]

can someone tell me what's wrong with this code?

Code:

microCoinminer.exe -o 127.0.0.1:44444 -u user -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 20 -g 1 -w 512 --thread-concurrency 32765 --no-submit-stale  -E  120 -l 5 --auto-fan  -g 1 --gpu-fan 40-90 --gpu-powertune 30 -temp-target 88 --temp-overheat 93 --temp-cutoff 95 --temp-hysteresis 3 -v 1 --lookup-gap 2

when I try to start just with this it's ok, but i really need this temp. control...

Code:

microCoinminer.exe -o 127.0.0.1:44444 -u user -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 20 -g 1 -w 512 --thread-concurrency 32765 --no-submit-stale 

[Bansheroom]

can someone tell me what's wrong with this code?

Code:

microCoinminer.exe -o 127.0.0.1:44444 -u user -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 20 -g 1 -w 512 --thread-concurrency 32765 --no-submit-stale  -E  120 -l 5 --auto-fan  -g 1 --gpu-fan 40-90 --gpu-powertune 30 -temp-target 88 --temp-overheat 93 --temp-cutoff 95 --temp-hysteresis 3 -v 1 --lookup-gap 2

when I try to start just with this it's ok, but i really need this temp. control...

Code:

microCoinminer.exe -o 127.0.0.1:44444 -u user -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 -I 20 -g 1 -w 512 --thread-concurrency 32765 --no-submit-stale 

Do you get an error message whe you put the code in the first line of a batch and
pause
in the second line?

edit: I think nut has found the error, see post below

[Nutnut]

your missing a "-" from temp target.

[evoked22]

nut2pool vs minersbest?

Why is the payout show on the minersbest pool so different to the nut2pool?

[Nutnut]

Not sure which payout you mean but as microCoin isn't on an exchange yet and the coin values are changing constantly, those values are meaningless. They in no way affect your payouts, they are simply an indication and you will always get your share of the block.

regards

Nut

[evoked22]

Not sure which payout you mean but as microCoin isn't on an exchange yet and the coin values are changing constantly, those values are meaningless. They in no way affect your payouts, they are simply an indication and you will always get your share of the block.

regards

Nut

Hi,

Thanks for that. I was referring to the estimated per day payout in microcoin based on the kh/s displayed in the pool section.

On your one i think its correct though on the other one its very low.

[Bansheroom]

Not sure which payout you mean but as microCoin isn't on an exchange yet and the coin values are changing constantly, those values are meaningless. They in no way affect your payouts, they are simply an indication and you will always get your share of the block.

regards

Nut

Thank you for explaining it.

Just have further to say, we are in Germany, ist 3:40 am here an pool owner had to struggle hard with this release and the counting featurs besides from a db crash....
Website shows Litecoin-price, hope that Microcoin can get to this price ever :-)

[evoked22]

Not sure which payout you mean but as microCoin isn't on an exchange yet and the coin values are changing constantly, those values are meaningless. They in no way affect your payouts, they are simply an indication and you will always get your share of the block.

regards

Nut

Hi,

Thanks for that. I was referring to the estimated per day payout in microcoin based on the kh/s displayed in the pool section.

On your one i think its correct though on the other one its very low.

I never look at the ltc/coin rates. Its always crazy. I was referring to the kh/s = microcoin per day in the pool section

[darthburnstuff]

Minersbest & Bansheroom is 100% legit.  I was able to withdraw my MCR from there no prob. I mine RAD coin there and also would not hesitate to mine any other coin from them!  A+

thank you ;-)

'

Your welcome.  You are honest and I like that.  Mining at your pool now.

[cryptohunter]

Anyone else getting shit slow MH with 280x ?? my 7950 is way faster??

In the microcoin miner window it starts showing like this   2.35mh/6.66mh    

then after a second it just drops to like


2.16mh/2.16mh ??



it seems like it starts to build up speed then stops and falls back to 2MH,  the temps are cold like 45 degrees, they normally run at 80 with scrypt ?

tried intensity 13 and 20 makes no difference.

[darthburnstuff]

Anyone else getting shit slow MH with 280x ?? my 7950 is way faster??

In the microcoin miner window it starts showing like this   2.35mh/6.66mh    

then after a second it just drops to like


2.16mh/2.16mh ??



it seems like it starts to build up speed then stops and falls back to 2MH,  the temps are cold like 45 degrees, they normally run at 80 with scrypt ?

tried intensity 13 and 20 makes no difference.

This is my .bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
color 2
microcoinminer.exe -o stratum+tcp://micro.minersbest.com:10466  -u username -p password  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --thread-concurrency 11200 --lookup-gap 2 --gpu-engine 1020 --gpu-memclock 1500 --gpu-powertune -20 --gpu-fan 85 -w 64 -I 13 -g 2

I'm running a GV-R928XOC-3GD (rev. 2.0).

Hope this helps.

[Bansheroom]

Not sure which payout you mean but as microCoin isn't on an exchange yet and the coin values are changing constantly, those values are meaningless. They in no way affect your payouts, they are simply an indication and you will always get your share of the block.

regards

Nut

Hi,

Thanks for that. I was referring to the estimated per day payout in microcoin based on the kh/s displayed in the pool section.

On your one i think its correct though on the other one its very low.

I never look at the ltc/coin rates. Its always crazy. I was referring to the kh/s = microcoin per day in the pool section

This is was i am getting from the pool , can give you a rough estimate of what to expect.



with this miner

[cryptohunter]

Anyone else getting shit slow MH with 280x ?? my 7950 is way faster??

In the microcoin miner window it starts showing like this   2.35mh/6.66mh    

then after a second it just drops to like


2.16mh/2.16mh ??



it seems like it starts to build up speed then stops and falls back to 2MH,  the temps are cold like 45 degrees, they normally run at 80 with scrypt ?

tried intensity 13 and 20 makes no difference.

This is my .bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
color 2
microcoinminer.exe -o stratum+tcp://micro.minersbest.com:10466  -u username -p password  --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --thread-concurrency 11200 --lookup-gap 2 --gpu-engine 1020 --gpu-memclock 1500 --gpu-powertune -20 --gpu-fan 85 -w 64 -I 13 -g 2

I'm running a GV-R928XOC-3GD (rev. 2.0).

Hope this helps.

Hey, thanks for trying to help. Same thing happened seemed to try and build up speed then just smacked back to 2.16MH, but anyway it looks cool in green

These cards seem to hash scrypt fine at 750KH but don't seem to like scrypt jane.  MSI 280x gaming... will just switch them back to scrypt for now i guess.

[MCR]

Anyone else getting shit slow MH with 280x ?? my 7950 is way faster??

In the microcoin miner window it starts showing like this   2.35mh/6.66mh    

then after a second it just drops to like


2.16mh/2.16mh ??



it seems like it starts to build up speed then stops and falls back to 2MH,  the temps are cold like 45 degrees, they normally run at 80 with scrypt ?

tried intensity 13 and 20 makes no difference.

Scrypt-jane with modified nFactor runs very lightly during the start. The heat and power consumption will rise as hashrates go down due to the modified nfactor.

[Bansheroom]

Scrypt-jane with modified nFactor runs very lightly during the start. The heat and power consumption will rise as hashrates go down due to the modified nfactor.

It keeps my older cards and my R9 270X cooler.
Currently, the R9 270X, gets about 6x more hash compared to scrypt, running @ 63 °C, 10-12 °C cooler as usual
the R9 290, gets about 8x to 9x more hash compared to scrypt, running @ 84-85 °C as usual

[evoked22]

This is was i am getting from the pool , can give you a rough estimate of what to expect.

thanks mate i just wanted to make sure that the figures shown on minersbest are wrong.

Jumped back into the pool. Solo was not going very well at this stage.

[evoked22]

What is the expected mh/s on a radeon 7970?

[darthburnstuff]

Scrypt-jane with modified nFactor runs very lightly during the start. The heat and power consumption will rise as hashrates go down due to the modified nfactor.

It keeps my older cards and my R9 270X cooler.
Currently, the R9 270X, gets about 6x more hash compared to scrypt, running @ 63 °C, 10-12 °C cooler as usual
the R9 290, gets about 8x to 9x more hash compared to scrypt, running @ 84-85 °C as usual

Bro, I don't know how your pool calculates coins per hour but I am getting WAY WAY more than what it shows!!!