[ANN] microCoin MRC - alcurEX - Scrypt-Jane - nFactor

[blacklig]

My 7950 ... but I am solo so maybe that's helping ?? Dunno ... I had bad sessions, reboot usually solved it!





coins still coming nice ...

Wow, 2 mils!
How do you solomine? What you put instead of pool address into config? Never did it  

Anyway.. maybe problem is, that my 7950 are put together? Yours is alone..

yours alone is actually giving as much as my 3 in rig together

[1715146467]

1715146467

[1715146467]

1715146467

[1715146467]

1715146467

[morrisminer]

Mine from a few moments ago:

01:20:11

{
"version" : "v1.1.1.0-gunit-beta",
"protocolversion" : 70000,
"walletversion" : 60000,
"balance" : 2223208.03780000,
"newmint" : 56845.00000000,
"stake" : 0.00000000,
"blocks" : 14270,
"moneysupply" : 51828585.99047000,
"connections" : 8,
"proxy" : "",
"ip" : "",
"difficulty" : 4.28418321,
"testnet" : false,
"keypoololdest" : 1389374930,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"errors" : ""
}

[Nutnut]

I'm still kinda new to this, only started 2 months ago.  Can Nut pool having over 51% of the hash rate cause a fork?  SHould 1/2 the people from Nut go to Minersbest (or others) to balance it out?  

Yes it can cause a fork and it did!!!

There's no fork.

blocksolved and nut2pools are on the same block. The hashrate is screwy though. Doesn;t seem to calculate the entire network. only the local pool.

To tired to work it out now but will look in the morning.



Nut

[buddynuno]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

Im leaning towards mrblocksolve has something wrong in his config.
They are both on same block, same diff. but the network shown on mrblocksolve doesnt make sense vs the diff on coin.

my getinfo corresponds with nut2pools at least.
{
"version" : "v1.1.1.0-gunit-beta",
"protocolversion" : 70000,
"walletversion" : 60000,
"balance" : 144694.93712000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 14233,
"moneysupply" : 51301261.99075000,
"connections" : 8,
"proxy" : "",
"ip" : "x,
"difficulty" : 4.19088520,
"testnet" : false,
"keypoololdest" : 1389373621,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"errors" : ""
}

Yes, i noticed that... Anyways plz try to ask people to go to the other pool. No sense on risking a fork, the hashrate is going up like nuts on nuts pool, and people fail to understand also that the reward will be much less because of the freaking cows that are sucking the juice with 20mh/s rigs!!!
So, please some miners join http://mcr.blocksolved.com and get more out of it!!!

[morrisminer]

My 7950 ... but I am solo so maybe that's helping ?? Dunno ... I had bad sessions, reboot usually solved it!





coins still coming nice ...

Wow, 2 mils!
How do you solomine? What you put instead of pool address into config? Never did it  

Anyway.. maybe problem is, that my 7950 are put together? Yours is alone..

yours alone is actually giving as much as my 3 in rig together

Could be that its single!  All my configs start with this:

microCoinminer.exe -o 192.168.1.50:44444 -u user -p x

that is the ip of my machine on my network ... if you have one then put 127.0.0.1

[halibit]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

What does that mean in a very technical manner

They have same block count than nutpool.
It is not forked.

[Nutnut]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

Im leaning towards mrblocksolve has something wrong in his config.
They are both on same block, same diff. but the network shown on mrblocksolve doesnt make sense vs the diff on coin.

my getinfo corresponds with nut2pools at least.
{
"version" : "v1.1.1.0-gunit-beta",
"protocolversion" : 70000,
"walletversion" : 60000,
"balance" : 144694.93712000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 14233,
"moneysupply" : 51301261.99075000,
"connections" : 8,
"proxy" : "",
"ip" : "x,
"difficulty" : 4.19088520,
"testnet" : false,
"keypoololdest" : 1389373621,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"errors" : ""
}

Yes, i noticed that... Anyways plz try to ask people to go to the other pool. No sense on risking a fork, the hashrate is going up like nuts on nuts pool, and people fail to understand also that the reward will be much less because of the freaking cows that are sucking the juice with 20mh/s rigs!!!
So, please some miners join http://mcr.blocksolved.com and get more out of it!!!

The bolded bit isn't technically correct. the per block rewards will be less but we find MANY more blocks. All works out in the end.

[Bansheroom]

Hi Miners,

first let me say sorry. I will further explain here what happend and how to get your coins.

What happend?

1. The initial wallet sync was very slow and the wallet was running unstable. This was while Testblocks where going on with 0.0001 reward.
We fixed the wallet issue and things looked fine for a while.

2. We started a cron payout to get rid of the already about 800 blocks we had to payout, things becam slow,we expected tha because of the numer of shares and the database load, eventually a bit more rejects, but remmber, still Test blocks. Cron finished sucesfully, pool turned to normal.

3. No other pool came online for a long time and more and more hasrate has been thrown add us and as we hitted the first real blocks even bigger guns have been thrown out, giving up soloing. Same time the real block time still was about 1-2 secs while target is 32 and the database began to puke really, counting all theses shares, still no other pool.

4. At this point we decided to put saftety in favor of profit and stopped the stratum. We (actually the owner does all this as i translate only and support him).
We dumped the (partially corrupt) db, repaired it, wrote a script to get total number of shares, diff, and how many blocks we got an what was inside them and so on.

5. We transfered your coins to your accounts using a manual written script based on the information we took from the db dump. This was the reason it took a long time since my last post. We have been busy and it was hard work.

Get your coins

6. You can login here again: http://micro.minersbest.com/ and create a manual payout request.

7. Login with same account here if you want: http://mrc.minersbest.com/ and mine.

We redirect the stratum from the old pool to the new to take care of those that are not at there miners and use automatic failovers.

If you can, anyway plese use the new stratum.


8. If you feel you have further lost anything please dont hesitate to contact me (pm here), and please provide details if possible, i cant look all logs myself, have to speak to the owner.

[blacklig]

My 7950 ... but I am solo so maybe that's helping ?? Dunno ... I had bad sessions, reboot usually solved it!





coins still coming nice ...

Wow, 2 mils!
How do you solomine? What you put instead of pool address into config? Never did it  

Anyway.. maybe problem is, that my 7950 are put together? Yours is alone..

yours alone is actually giving as much as my 3 in rig together

Could be that its single!  All my configs start with this:

microCoinminer.exe -o 192.168.1.50:44444 -u user -p x

that is the ip of my machine on my network ... if you have one then put 127.0.0.1

Okay.. so I must put IP of machine where wallet is running? What if that machine would turn off? When then coins go?

[darthburnstuff]

My 7950 ... but I am solo so maybe that's helping ?? Dunno ... I had bad sessions, reboot usually solved it!





coins still coming nice ...

All that from solo mining?!?

[wenwen]

who can give me some useful nodes to the correct block chain，thx！

[lexa]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

This is a glitch of displaying Net hashrate for scryptjane, it just shows local pool hashrate. I think on all scrypt jane pools I've seen Net hashrate exactly matches pool hashrate.
Both pools are on the same block height.

[morrisminer]

My 7950 ... but I am solo so maybe that's helping ?? Dunno ... I had bad sessions, reboot usually solved it!





coins still coming nice ...

All that from solo mining?!?

Yup .. started this mining lark in December ... learned fast to have the miners prepped for a launch as total mayhem usually ensues I mined a shitload of 0.0001 value blocks but was straight in when the reward went up. I will always mine solo for first 12 hours or so now ... as long as coins are coming I'll stay at it ..

[buddynuno]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

This is a glitch of displaying Net hashrate for scryptjane, it just shows local pool hashrate.
Both pools are on the same block height.

Yep i can confirm that no fork happened... yet

Try so lure more miners to your pool BUT don´t spam plz

Thx

[morrisminer]

where is miners best ? Want an eu based server...

[Bansheroom]

where is miners best ? Want an eu based server...

We are in Germany.

[lexa]

where is miners best ? Want an eu based server...

http://mcr.blocksolved.com is EU based.

[halibit]

And we're back.

Phew! how to scale a pool from 0 to 1.7GHs in a couple of hours!  

Enjoy chaps and chappets.

I can be wrong but I 'm affraid its forked, look at http://mcr.blocksolved.com nethashrate

This is a glitch of displaying Net hashrate for scryptjane, it just shows local pool hashrate.
Both pools are on the same block height.

Yep i can confirm that no fork happened... yet

Try so lure more miners to your pool BUT don´t spam plz

Thx

Yep. Lauch was successfull and now diff is safe level I think.
fast blocktarget coins are not easy to born. Good job dev

[Bansheroom]

FOR WHAT I EXPERIENCED WHEN YOU SEE THIS MESSAGE "This pool is currently in maintenance mode" YOU WILL NEVER SEE THIS POOL ONLINE AGAIN!

BYE BYE MICROCOINS 

I read this when you posted it. Such things make me angry.
AGAIN, Specially for you !!!

Hi Miners,

first let me say sorry. I will further explain here what happend and how to get your coins.

What happend?

1. The initial wallet sync was very slow and the wallet was running unstable. This was while Testblocks where going on with 0.0001 reward.
We fixed the wallet issue and things looked fine for a while.

2. We started a cron payout to get rid of the already about 800 blocks we had to payout, things becam slow,we expected tha because of the numer of shares and the database load, eventually a bit more rejects, but remmber, still Test blocks. Cron finished sucesfully, pool turned to normal.

3. No other pool came online for a long time and more and more hasrate has been thrown add us and as we hitted the first real blocks even bigger guns have been thrown out, giving up soloing. Same time the real block time still was about 1-2 secs while target is 32 and the database began to puke really, counting all theses shares, still no other pool.

4. At this point we decided to put saftety in favor of profit and stopped the stratum. We (actually the owner does all this as i translate only and support him).
We dumped the (partially corrupt) db, repaired it, wrote a script to get total number of shares, diff, and how many blocks we got an what was inside them and so on.

5. We transfered your coins to your accounts using a manual written script based on the information we took from the db dump. This was the reason it took a long time since my last post. We have been busy and it was hard work.

Get your coins

6. You can login here again: http://micro.minersbest.com/ and create a manual payout request.

7. Login with same account here if you want: http://mrc.minersbest.com/ and mine.

We redirect the stratum from the old pool to the new to take care of those that are not at there miners and use automatic failovers.

If you can, anyway plese use the new stratum.


8. If you feel you have further lost anything please dont hesitate to contact me (pm here), and please provide details if possible, i cant look all logs myself, have to speak to the owner.

[darthburnstuff]

FOR WHAT I EXPERIENCED WHEN YOU SEE THIS MESSAGE "This pool is currently in maintenance mode" YOU WILL NEVER SEE THIS POOL ONLINE AGAIN!

BYE BYE MICROCOINS 

I read this when you posted it. Such things make me angry.
AGAIN, Specially for you !!!

Hi Miners,

first let me say sorry. I will further explain here what happend and how to get your coins.

What happend?

1. The initial wallet sync was very slow and the wallet was running unstable. This was while Testblocks where going on with 0.0001 reward.
We fixed the wallet issue and things looked fine for a while.

2. We started a cron payout to get rid of the already about 800 blocks we had to payout, things becam slow,we expected tha because of the numer of shares and the database load, eventually a bit more rejects, but remmber, still Test blocks. Cron finished sucesfully, pool turned to normal.

3. No other pool came online for a long time and more and more hasrate has been thrown add us and as we hitted the first real blocks even bigger guns have been thrown out, giving up soloing. Same time the real block time still was about 1-2 secs while target is 32 and the database began to puke really, counting all theses shares, still no other pool.

4. At this point we decided to put saftety in favor of profit and stopped the stratum. We (actually the owner does all this as i translate only and support him).
We dumped the (partially corrupt) db, repaired it, wrote a script to get total number of shares, diff, and how many blocks we got an what was inside them and so on.

5. We transfered your coins to your accounts using a manual written script based on the information we took from the db dump. This was the reason it took a long time since my last post. We have been busy and it was hard work.

Get your coins

6. You can login here again: http://micro.minersbest.com/ and create a manual payout request.

7. Login with same account here if you want: http://mrc.minersbest.com/ and mine.

We redirect the stratum from the old pool to the new to take care of those that are not at there miners and use automatic failovers.

If you can, anyway plese use the new stratum.


8. If you feel you have further lost anything please dont hesitate to contact me (pm here), and please provide details if possible, i cant look all logs myself, have to speak to the owner.

Minersbest & Bansheroom is 100% legit.  I was able to withdraw my MCR from there no prob. I mine RAD coin there and also would not hesitate to mine any other coin from them!  A+