Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[shirenlihei]

Does everyone feel it's very hard to connect Coinedup? The sever of Coinedup should be in CA, but why it's so slow?

[1715010630]

1715010630

[1715010630]

1715010630

[1715010630]

1715010630

[1715010630]

1715010630

[nonny12]

It has always loaded slow. Be patient, it works eventually. They do bring the site down sometimes to add new coins and do maintenance. It's usually announced on their twitter feed.

[ShadowOfScales]

Promising coin, I may be slightly late to the party, but I'm in.

[Xperianz]

Promising coin, I may be slightly late to the party, but I'm in.

It's never too late, I jumped on this rocket 12 hours ago

[nonny12]

Promising coin, I may be slightly late to the party, but I'm in.

Difficulty still favorable. Better now than the next difficulty adjustment!

[blacklig]

Does it seem only to me that because these 2 bigger hashers on bitcrush diff is going from 2 to 7?
Hmm.. hope price will follow and we will beat doges pump

edit: btw: why I am again newbie? Did not post anything for like 3 days and I already have to learn how to type again?

[blacklig]

Oh my god,
I send some VTC to coined up just to have someting there in case some pumpy dumpy appears, but I just used address saved in my wallet which was coined up deposit address for past 2 mines, so I did not even checked it, just sent money out of there to that address and it did not reached COINED UP! it seems its just gone somewhere forewer! Is it possible?
I dont know why, but now deposit address on coined up is different!?!?!?!?!?! what a hell?? Why did they change it? What will be with my coins if that address was mine and now I have different address there?

[Xperianz]

Oh my god,
I send some VTC to coined up just to have someting there in case some pumpy dumpy appears, but I just used address saved in my wallet which was coined up deposit address for past 2 mines, so I did not even checked it, just sent money out of there to that address and it did not reached COINED UP! it seems its just gone somewhere forewer! Is it possible?
I dont know why, but now deposit address on coined up is different!?!?!?!?!?! what a hell?? Why did they change it? What will be with my coins if that address was mine and now I have different address there?

Don't worry it will show up, coinedup adds new deposit addresses usually after each deposit but the "old" ones still work

[cherominerito]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

[bengtåke]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

[cherominerito]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

[gonzzo]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

[cherominerito]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

Thanks.

TC at 7000 and Intensity at 13 I get 1 MH/s with 3 280X. My normal rate is > 2MH/s

[bengtåke]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

Thanks.

TC at 7000 and Intensity at 13 I get 1 MH/s with 3 280X. My normal rate is > 2MH/s

That's normal, you can expect roughly 40-50% of your normal scrypt performance. This is due to the increased computational complexity of the algorithm used in this coin (we currently have a N-factor of 2048 compared to 1024 in regular scrypt, so basically twice the memory and twice the number of iterations for the same hash)

[gonzzo]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

Thanks.

TC at 7000 and Intensity at 13 I get 1 MH/s with 3 280X. My normal rate is > 2MH/s

yah not to bad my worker with 4 x 280x get around 1200 kh/s
just check your hw errors to

btw diff. raised to 5.65278597 hope the exchange rate catches up ....

[blacklig]

Oh my god,
I send some VTC to coined up just to have someting there in case some pumpy dumpy appears, but I just used address saved in my wallet which was coined up deposit address for past 2 mines, so I did not even checked it, just sent money out of there to that address and it did not reached COINED UP! it seems its just gone somewhere forewer! Is it possible?
I dont know why, but now deposit address on coined up is different!?!?!?!?!?! what a hell?? Why did they change it? What will be with my coins if that address was mine and now I have different address there?

Don't worry it will show up, coinedup adds new deposit addresses usually after each deposit but the "old" ones still work

Oh yeah, its there after 3 hours.. uff 
But it really took a while this way and changing deposit addresses is really weird habit.. anyway.. good its there and coined up gained little bit more credibility in my eyes

[blacklig]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

Thanks.

TC at 7000 and Intensity at 13 I get 1 MH/s with 3 280X. My normal rate is > 2MH/s

yah not to bad my worker with 4 x 280x get around 1200 kh/s
just check your hw errors to

btw diff. raised to 5.65278597 hope the exchange rate catches up ....

333 khz per 280X is actually pretty good result.. I am getting only 274 out of mine 280X.. what settings do you have?
I have
--gpu-fan 100 -I 13 -g 1 -w 256 --thread-concurrency 13312 --gpu-engine 1019 --gpu-memclock 1550 --gpu-fan 100 --gpu-vddc 1.2 --gpu-powertune 20 --lookup-gap 2

so any idea how to push it further?

[gonzzo]

I can´t mine. I use correct cgminer donwloaded from official link but It does not generate coins in a pool. No accepted shares. Rejected either. Any help?

What pool and settings are you using?

C:\cgminervertcoin\cgminer.exe  --scrypt -o stratum+tcp://pickaxe.pool.pm:3305 -u user -p password -g 2 -w 256 --thread-concurrency 8192 -I 13  --lookup-gap 2 --gpu-engine 1030 --gpu-memclock 1500


That is my bat. I have tried other pool with same results.

Thanks.

try with a tc value of 4096 and itensity 12
was the solutions for me

edit: you can try to set itensity back  to 13 once the miner is running

Thanks.

TC at 7000 and Intensity at 13 I get 1 MH/s with 3 280X. My normal rate is > 2MH/s

yah not to bad my worker with 4 x 280x get around 1200 kh/s
just check your hw errors to

btw diff. raised to 5.65278597 hope the exchange rate catches up ....

333 khz per 280X is actually pretty good result.. I am getting only 274 out of mine 280X.. what settings do you have?
I have
--gpu-fan 100 -I 13 -g 1 -w 256 --thread-concurrency 13312 --gpu-engine 1019 --gpu-memclock 1550 --gpu-fan 100 --gpu-vddc 1.2 --gpu-powertune 20 --lookup-gap 2

so any idea how to push it further?

ya i'm at 350 kh/s with my 280x now!
Setting:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
--scrypt -o server -u user -p pw -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1020 --gpu-memclock 1600 --thread-concurrency 8192

strange, the same setting was not working yesterday. after some reboots today this setting is working like a charm without any hw errors or rejects 
however i'm happy with this result and will not experiment any further now for a while.

good luck

gonzzo

[cherominerito]

Thanks to everybody.

I am very interested in this coin. It´s very innovative not like other which are clones 1:1 of Liteoin.

[aleks648]

64-Bit Win Binaries of the new CUDAMiner available.  Vertcoin is now supported in the official git so this a stock build. Ensure you use the modifier

Code:

--algo=scrypt:2048 

Download here: http://kilovolt.co.uk/Vertcoin/Cudaminer64.zip