[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[DarKSm0ke]

What is the best setting for mining with Titan?

Is it better to stay with vardiff or is there a particular difficulty with low reject rate?

I am currently using d=8192 and today i can see some pick of 80% or reject 

[suchmoon]

I stopped mining to check the exchange and immature values and its been 4 days its stuck at the same

Immature   0.00001855 BTC
Unexchanged   0.00022829 BTC
Ready For Payout   0.00001605 BTC
Total Expected   0.00026289 BTC

Why is not exchanging?

Probably this:

https://bitcointalk.org/index.php?topic=448649.msg8138087#msg8138087

[kdbaumann]

I just started to use this pool.

I am getting 100% reject rates at the moment?

Thoughts?  Do I have something setup incorrectly?  Followed the instructions.  Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....

Thanks!

[suchmoon]

I just started to use this pool.

I am getting 100% reject rates at the moment?

Thoughts?  Do I have something setup incorrectly?  Followed the instructions.  Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....

Thanks!

This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.

[Mr.Mac™]

Any chance to know why after about 20hr of mining still no stats on user page???

Have you double checked your worker name? No extra characters etc?

Does your miner/software show that it's connected to CM and is accepting shares?

If the worker name used as user is the BTC address also used as worker on the miner: Obviusly YES for both questions!

More than 2 days of mining and still nothing... Can I know why no user stats by using my BTC address used also as worker name?
I checked the miner too, perfectly connected with about 1 thousand accepted until now...
What is wrong?

[suchmoon]

Any chance to know why after about 20hr of mining still no stats on user page???

Have you double checked your worker name? No extra characters etc?

Does your miner/software show that it's connected to CM and is accepting shares?

If the worker name used as user is the BTC address also used as worker on the miner: Obviusly YES for both questions!

More than 2 days of mining and still nothing... Can I know why no user stats by using my BTC address used also as worker name?
I checked the miner too, perfectly connected with about 1 thousand accepted until now...
What is wrong?

You have a couple of options. You can post a screenshot of your miner screen (personal information removed of course), and/or you can PM Terk with your worker name if you're absolutely sure everything is fine on your end.

[rajan1788]

I stopped mining to check the exchange and immature values and its been 4 days its stuck at the same

Immature   0.00001855 BTC
Unexchanged   0.00022829 BTC
Ready For Payout   0.00001605 BTC
Total Expected   0.00026289 BTC

Why is not exchanging?

Probably this:

https://bitcointalk.org/index.php?topic=448649.msg8138087#msg8138087

Oh..the bug is not fixed yet!!

[Mr.Mac™]

Any chance to know why after about 20hr of mining still no stats on user page???

Have you double checked your worker name? No extra characters etc?

Does your miner/software show that it's connected to CM and is accepting shares?

If the worker name used as user is the BTC address also used as worker on the miner: Obviusly YES for both questions!

More than 2 days of mining and still nothing... Can I know why no user stats by using my BTC address used also as worker name?
I checked the miner too, perfectly connected with about 1 thousand accepted until now...
What is wrong?

You have a couple of options. You can post a screenshot of your miner screen (personal information removed of course), and/or you can PM Terk with your worker name if you're absolutely sure everything is fine on your end.

Already sent him 2 PMs about that (on 1st I also sent him the url for user stat and i double/triple checked the BTC Address/worker name) and still no reply...

[DieJohnny]

What is the best setting for mining with Titan?

Is it better to stay with vardiff or is there a particular difficulty with low reject rate?

I am currently using d=8192 and today i can see some pick of 80% or reject 

I have been using 8192 on my titan for a week, the highest reject has been 35%, typical is 15-20%.

on my titan it says i am mining at 310 but i typically register about 275 on the pool.

I am thinking about experimenting and seeing if I can find a better difficulty setting.

[Terk]

Any chance to know why after about 20hr of mining still no stats on user page???

Have you double checked your worker name? No extra characters etc?

Does your miner/software show that it's connected to CM and is accepting shares?

If the worker name used as user is the BTC address also used as worker on the miner: Obviusly YES for both questions!

More than 2 days of mining and still nothing... Can I know why no user stats by using my BTC address used also as worker name?
I checked the miner too, perfectly connected with about 1 thousand accepted until now...
What is wrong?

I don't see anything from your username in my database. I sent you some questions via PM which might help us track the issue.

[Terk]

What is the best setting for mining with Titan?

Is it better to stay with vardiff or is there a particular difficulty with low reject rate?

I am currently using d=8192 and today i can see some pick of 80% or reject 

I have been using 8192 on my titan for a week, the highest reject has been 35%, typical is 15-20%.

on my titan it says i am mining at 310 but i typically register about 275 on the pool.

I am thinking about experimenting and seeing if I can find a better difficulty setting.

Titan has some issues with non-LTC mining due to details of how its firmware is designed. I've been working with KnC recently and helped them to improve things. Please make sure you are using the latest firmware which they released recently as it improves Titan performance on coin-switching pools.

Also, I am working on some workarounds on the pool end to optimise them for Titans and its shortcomings. Titan performance on CleverMining should improve any day now, assuming you have the latest firmware installed. There will be an announcement when it's running.

[kdbaumann]

Thanks.

I just started to use this pool.

I am getting 100% reject rates at the moment?

Thoughts?  Do I have something setup incorrectly?  Followed the instructions.  Have about 2Th's aimed at this pool due to the payout stats, so I hope this is not a big issue with the pool but some thing on my end....

Thanks!

This is not a SHA256 pool, it uses a different algorithm (Scrypt). Your miner won't work here. Use Eligius, bitcoin.cz, or find a p2pool node near you.

[digitalgrow]

hi terk
i have been mining for 2 weeks
without a payout 0.37 btc is stuck
please payout

[Flep182]

Hello our BTC address has also not received a payout our address is : 16iygeWD8RVL7FKKSvTnc5UjaPHqZ3EBEt
we have .67 btc, with no payouts yet.  Please initiate payout so we can confirm its working properly or PM if there is an issue thanks Terk! then we can restart our mining at clevermining.

PM'ing Terk yourself will get it done faster.

[NoobKidOnTheBlock]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

[Flep182]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

Have you checked the stats page on the site for your BTC address? 

[NoobKidOnTheBlock]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

Have you checked the stats page on the site for your BTC address? 

ya but I'm using my bittrex btc address as my username do you think that is why I'm not seeing anything yet? also how do I set my parameters to scrypt on my bfgminer

[NoobKidOnTheBlock]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

Have you checked the stats page on the site for your BTC address? 

ya but I'm using my bittrex btc address as my username do you think that is why I'm not seeing anything yet? also how do I set my parameters to scrypt on my bfgminer

also what does it mean when it says pool 0 is issuing work for an old block then has a bunch of letters and numbers after that? sorry but I'm really that dumb when it comes to mining lol

[suchmoon]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

Have you checked the stats page on the site for your BTC address? 

ya but I'm using my bittrex btc address as my username do you think that is why I'm not seeing anything yet? also how do I set my parameters to scrypt on my bfgminer

bfgminer --scrypt ...

First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.

[NoobKidOnTheBlock]

This might sound like a stupid question but I set up a bfgminer and connected it to clevermining.com and how do I know if my miner is actually mining and getting me coins? I have never mined before and I'm using my CPU for mining and looking to upgrade it with antminers or whatever those things are called lol That's how unfamiliar I am with mining. Would anyone be able to help me out or guide me to a forum or site where I can learn to begin mining and which miners to use and how to set them up properly? Much appreciated thanks Cheers everyone

Have you checked the stats page on the site for your BTC address? 

ya but I'm using my bittrex btc address as my username do you think that is why I'm not seeing anything yet? also how do I set my parameters to scrypt on my bfgminer

bfgminer --scrypt ...

First you need to make sure the pool is accepting shares. Set the difficulty manually to the lowest allowed value, i.e. use d=128 as your password. Even at that it will take a long time to find a share with a CPU. Then you can start looking for stats. It doesn't matter if the BTC address is from an exchange.

so when I start my bfgminer it goes right to url: that's when I enter stratum+tcp://us.clevermining.com:3333 right? so when do i enter --scrypt? after the url? or after my password?