papampi
Full Member
 Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
 |
August 13, 2017, 06:18:29 AM |
|
The switching is based on how much a coin's profit fluctuates and how long it's been since you last switched. All coins are set initially at 100% fluctuation until more information is gathered over the week. So the coin profit fluctuations and time since last switching are the basis of the switching threshold.
It can switch within five minutes or stay mining on one algorithm for hours; depends on the live profits.
Thanks a lot for explanation, but i still dont understand why some times it stop a mining process and start the same again Below you can see it stopped the running myr-mgr and start it again , this happens a lot Why some times it restart the top miner and some times continue it?
Status: Running
Speed Active Launched Command
----- ------ -------- -------
397.38 MH/s 00 Days 01 Hours 38 Minutes Once Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://europe.hub.miningpoolhub.com:20499 -u papampi.rig2 -p x -R 5
Status: Idle
Speed Active Launched Command
----- ------ -------- -------
0.00 PH/s 00 Days 00 Hours 25 Minutes 2 Times Bin\NVIDIA-TPruvot\ccminer-x64.exe -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:17005 -u papampi.rig2 -p x -R 5 |
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
August 13, 2017, 07:50:34 AM |
|
i bought hashpower on nicehash.
Speed at pool 103.5467 GH /s
Speed paying 101.6815 GH /s
Delta +1.8652 GH /s (+1.80%)
Rejected at pool 1.4000 GH /s (1.33%)
Extra rewards 0.0000 GH /s
Timed-out speed 0.0000 GH /s
yes i now the link i have been mining for a couple of days now and it was oke.
but this mining speeds vs payout can't be right.
It all depends on the luck you have right now. If you are unlucky - you can spend 150-200%, even 300% more time to obtain a block; the other way around is also valid - you can spend 20-50% of the time to obtain the block. Eventually it evens out at 100% as long as you keep on mining. You can check the recent blocks on this page and you'll understand what the luck means. |
|
|
|
|
|
aaronsace
|
|
August 13, 2017, 09:18:15 AM |
|
Newbee on MPH ...
What does the Hub Worker Configuration do ?
I'm using Multi Pool Miner, Do I need to set the default job for my hub workers ?
The hub uses the 12xxx ports; it has no effect on MultiPoolMiner as it does not use those ports. Just enter your username and wallet in the 'start.bat' file and your done. |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 13, 2017, 11:38:05 AM |
|
Is there a problem on MPH or is there a problem on MPM ?
btc/GH/Day values hasnt changed for over 8 hours ...
MPM is mining same coin for 8 hour with no switch....
Any one else noticed this or its just my problem ?
|
|
|
|
|
|
|
sky62
|
|
August 13, 2017, 09:19:44 PM |
|
Mining Pool Hub support extranonce ?
|
|
|
|
|
|
lavajumper
|
|
August 14, 2017, 08:33:17 PM |
|
Guys... your sexcoin pool is on a forked chain. Could someone look into this?
|
SXC: S7NgcaY5qtjsBpNqdJsYbeTjacwuCUhC2Z | LTC: LVmkQd2T5nffVf1Bum9GzbNTaEQBXxURo9 | BTC: 17H4ut7WeaUkVkNh3UfvQArvsawabmrvg4 | http://sexcoinforum.com | Bitrated user: Lavajumper. |
|
|
sohard4me
Member
Offline
Activity: 125
Merit: 10
|
|
August 14, 2017, 11:11:06 PM |
|
It seems static difficulty for myr-gr is not working.
Pool been reporting lower hash rate than my actual hash rate over 24 hours....
|
|
|
|
BadHaggis
Newbie
Offline
Activity: 1
Merit: 0
|
|
August 15, 2017, 12:37:08 AM |
|
I got multipoolminer up and running and am starting to get coins in. I haven't set up an auto exchanges yet. Is it possible to auto exchange some coins but not others?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
|
|
|
|
|
BitBot.V2
Member
Offline
Activity: 69
Merit: 10
|
|
August 15, 2017, 01:05:27 AM |
|
I got multipoolminer up and running and am starting to get coins in. I haven't set up an auto exchanges yet. Is it possible to auto exchange some coins but not others?
For example, if the multi algo mines Etherium, Dash, or Litecoin I'd like to keep their respective coins, but then auto exchange anything else into Bitcoin. Can that be set up? How would I do that?
If you click on the auto_exchange in the left side menu, it will open the auto_exchange page. Then you can activate/deactivate each coin individually from that page by using the sliders, don't forget to click 'update settings' |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 15, 2017, 06:01:08 AM |
|
It seems static difficulty for myr-gr is not working.
Pool been reporting lower hash rate than my actual hash rate over 24 hours....
Yes, its been like that for over 2 days Pool stats gets updated longer than before, dont know if its intentional or bug read some earlier posts started by me and answered by aaronsace |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 15, 2017, 06:50:53 AM |
|
@aaronsace Hi, I need help with MPM switch, seems like something is not right. I have been using MPM for the last week I feel like its not getting what it can/show in mining from MPH. So ... here is my setup. 2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75) MPM sync time 600 (was 300 for past week , changed to 600 last night) coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday) MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM which makes 2.3$ a day/card at least What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card: 2017-08-15 (UTC) 0.00118331 BTC
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
So ... Any idea what I need to do to get it to optimum ? P.S. You seen some of my logs in github. |
|
|
|
|
aaronsace
|
|
August 15, 2017, 06:58:07 AM |
|
@aaronsace Hi, I need help with MPM switch, seems like something is not right. I have been using MPM for the last week I feel like its not getting what it can/show in mining from MPH. So ... here is my setup. 2 rigs, each 6 x 1070, mild OC, (250+ mem, 100+ core, 85% Power, Temp limit 75) MPM sync time 600 (was 300 for 3 days) coins/algos : Ethash,Equihash,Lyra2re2,Neoscrypt, Sia,Groestl,cryptonight,lyra2z,myr-mgr (removed myr-mgr yesterday) MPM on each rig says I should get at least 14$ a day without MPM and 19$ a day with MPM which makes 2.3$ a day/card at least What MPH bitcoin dashboard shows for last 4 days is as below which is way less than 2$ a day/card: 2017-08-15 (UTC) 0.00118331 BTC
2017-08-14 (UTC) 0.00470864 BTC price was around 4k$ = 18 $
2017-08-13 (UTC) 0.00582330 BTC price was around 3.5k$= 20 $
2017-08-12 (UTC) 0.00549901 BTC price was around 3.2k$ = 17 $
2017-08-11 (UTC) 0.00587651 BTC price was around 3.2k$ = 18 $
So ... Any idea what I need to do to get it to optimum ? P.S. You seen some of my logs in github. Please post to GitHub if you think there is an issue with MultiPoolMiner. |
|
|
|
|
|
|
aaronsace
|
|
August 15, 2017, 10:56:59 AM
Last edit: August 15, 2017, 01:00:05 PM by aaronsace |
|
Definitely should be 3 minutes, found the post where I remember him saying: 3 minutes. it can be little bit delayed. is still updating regularly.  |
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 15, 2017, 01:12:42 PM
Last edit: August 15, 2017, 02:22:17 PM by papampi |
|
Seems like no one cares at miningpoolhub,
I sent email and NO Answer
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 15, 2017, 01:58:56 PM |
|
Definitely should be 3 minutes, found the post where I remember him saying: 3 minutes. it can be little bit delayed. is still updating regularly. How to disable MiningPoolHub and only mine at Zpool with your MultiPoolMiner ? |
|
|
|
|
alucard20724
|
|
August 16, 2017, 03:54:07 AM
Last edit: August 16, 2017, 04:27:58 AM by alucard20724 |
|
Definitely should be 3 minutes, found the post where I remember him saying: 3 minutes. it can be little bit delayed. is still updating regularly. so... should making the default pool MiningPoolHubCoins take are of that? or does the problem exist with both? |
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
August 16, 2017, 05:48:59 AM |
|
Zpool works fine.
|
|
|
|
|
alucard20724
|
|
August 16, 2017, 06:45:21 AM |
|
Zpool works fine.
Does NiceHash work fine too? oh yeah.. I was asking about MiningPoolHub and MiningPoolHubCoin.  |
|
|
|
|
|
