[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[yurasic park]

In general, the pool is unclean. In particular, this applies to ZCOin. Where does it go about 20 percent? Can suffice to HUMBLE UP. You have not 0,9 percent, but 29 percent.

Is this factual or timing of pool showing hash rate?

The hash is about 65.8-68MH / s. I'm on the pool for two months.

[Cryptographertm]

So were all leaving MPH then?

Whats the next best pool? Ive only ever used one, just started. But if people are being stolen from Im going to have to look around I guess.

[Minimaximo]

for autoexchange to bitcoin cash out fee is  0.0003 ?! this is about 4.2 eur to retrieve 0.002 minimum..is there a way to have a lower fee, cause this seems a little to much for me.

Another thing..im using multipoolminer and for my 1080 ti it shows that i should mine about 0.00047 to 0.00057 at best...when in reality im not doing even half of that...i know alot of people have this issue..maybe im doing something wrong.

[razorseal]

So were all leaving MPH then?

Whats the next best pool? Ive only ever used one, just started. But if people are being stolen from Im going to have to look around I guess.

What? nobody is leaving MPH, stolen from???!!! What are you talking about lol. just an issue they're having with lyra2re2

[razorseal]

for autoexchange to bitcoin cash out fee is  0.0003 ?! this is about 4.2 eur to retrieve 0.002 minimum..is there a way to have a lower fee, cause this seems a little to much for me.

Another thing..im using multipoolminer and for my 1080 ti it shows that i should mine about 0.00047 to 0.00057 at best...when in reality im not doing even half of that...i know alot of people have this issue..maybe im doing something wrong.

Don't use BTC, the dev mentions this too... Use another one like LTC... you can convert to BTC on gdax if you'd like. just point our ltc wallet to gdax deposits.

[crypper]

So were all leaving MPH then?

Whats the next best pool? Ive only ever used one, just started. But if people are being stolen from Im going to have to look around I guess.

What? nobody is leaving MPH, stolen from???!!! What are you talking about lol. just an issue they're having with lyra2re2

It's not their problem. It's miner's/algo's problem - I got pretty much identical results from both MPH  and Suprnova. I'm now mining equihash with EWBF and so far I'm happy with what I see (hash rate is what I expect).

[Minimaximo]

for autoexchange to bitcoin cash out fee is  0.0003 ?! this is about 4.2 eur to retrieve 0.002 minimum..is there a way to have a lower fee, cause this seems a little to much for me.

Another thing..im using multipoolminer and for my 1080 ti it shows that i should mine about 0.00047 to 0.00057 at best...when in reality im not doing even half of that...i know alot of people have this issue..maybe im doing something wrong.

Don't use BTC, the dev mentions this too... Use another one like LTC... you can convert to BTC on gdax if you'd like. just point our ltc wallet to gdax deposits.

damn, thx for the info...any suggestions for a LTC wallet?

[djmuk2]

Ok - about time we got a litecoin block - over 40 hours now, expected was about 8 prior to diff increase now expected is about 15!  The chain owes us 3 blocks by my reckoning!!!

Just hope we get several quick ones...

[jp1981]

Why is my BTC disappearing from the pool?

[Temporel]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

my old ccminer from 2015 gives me better hashrate (same as the one used in OCM without the 2% fee)

[Cryptographertm]

yea sounds good, im leaving too i think.somethings not right. too many ppl having problems with their money and hash rate at MPH. enough is enough. plenty of other pools.

[Minerdc]

So were all leaving MPH then?

Whats the next best pool? Ive only ever used one, just started. But if people are being stolen from Im going to have to look around I guess.

What? nobody is leaving MPH, stolen from???!!! What are you talking about lol. just an issue they're having with lyra2re2

It's not their problem. It's miner's/algo's problem - I got pretty much identical results from both MPH  and Suprnova. I'm now mining equihash with EWBF and so far I'm happy with what I see (hash rate is what I expect).

This.
I have switched to equihash and it seems closer to the expected.
It is still early to say 100% I will report in a couple of days

[razorseal]

for autoexchange to bitcoin cash out fee is  0.0003 ?! this is about 4.2 eur to retrieve 0.002 minimum..is there a way to have a lower fee, cause this seems a little to much for me.

Another thing..im using multipoolminer and for my 1080 ti it shows that i should mine about 0.00047 to 0.00057 at best...when in reality im not doing even half of that...i know alot of people have this issue..maybe im doing something wrong.

Don't use BTC, the dev mentions this too... Use another one like LTC... you can convert to BTC on gdax if you'd like. just point our ltc wallet to gdax deposits.

damn, thx for the info...any suggestions for a LTC wallet?

for now, use coinbase wallet. go do yourself a favor and order a cold wallet (ledger nano, trezor or keepkey) and once you accumulate little bit of money, send over to your cold wallet.

[wizmanza]

CCminer Lyra2Rev2 hashrate issue

OK, guys. So I've seen many post here re: hash rate reported by pool is 10-40% lower than reported by miner. I personally noticed 25% discrepancy while mining vertcoin a few days ago. Admins suggested (see a few pages back) the issue was limited to Lyra2Rev2 and was most likely miner's fault rather than pool's problem.
The table below summarises the results of my test. So if you choose to mine Lyra2Rev2 coins be prepared to have lower revenues than predicted.

GPU                                               2x GTX 1070                                          2x GTX 1070
clocks                                      +150,+500, 70%                                   +150,+500, 70%
driver                                              372.54                                                      372.54
miner                                          Ccminer 2.2                                                    Ccminer 2.2
pool                                                          MPH                                                        Suprnova
coin / algo                                       Monacoin / Lyra2Rev2                            Monacoin / Lyra2Rev2
mining time, h                                           24                                                           24
Hashrate from miner, MH/s                         68.7                                                            68
Average hashrate from pool, MH/s         ~58                                                            ~58
Total shares / invalid shares                    5610 / 1                                                 5158 / 0
Predicted revenue (Whattomine), Mona      0.42                                                            0.42
Actual revenue, Mona                                  0.36                                                     0.34



Question to admins: since you are aware of the problem, why not make it clear on the website (just make a note)? Lyra2Rev2 coins are the most profitable at the moment and people on autoswitch will probably mine those vertcoins and monacoins expecting the highest yield while mining lower profitability coins (e.g. equihash zencash or BTG) may in fact be more profitable (given those algos do not have the same problem as Lyra, that is I'm going to test today).

Nice...
Thanks for the test

question..is the 70% the Power Limit percentage? OR fan speed?

[mano237]

Why MPH is not switching between all Scrypt coins if I choose the coin switching port? It is switching between verge, game but not LTC, why??

[Rockett0]

Anybody using EthOS??

I am wondering how I need to setup my ccminer to auto switch

just list like proxypool1 proxypool2??
should be enough to the auto switch?

This will switch between the different pools on the same algo

Swapping algos not likely to work as you have to change the ccminer flag as well.

*working config
ccminer=flags -a lyra2v2 -i 22
ccminer=proxypool1 hub.miningpoolhub.com:17018

or for equihash
dstm-zcash=proxypool1 us-east.equihash-hub.miningpoolhub.com:17023

*I could never get ethash to work correctly in ethos on this pool.

[lolmining]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

my old ccminer from 2015 gives me better hashrate (same as the one used in OCM without the 2% fee)

Link please.

[Temporel]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

my old ccminer from 2015 gives me better hashrate (same as the one used in OCM without the 2% fee)

Link please.

no idea where I took it, probably Github. The VTC dev team used that version for their OCM fork. They are actually the ones who told me about it. You can find a link from their reddit page, they still mention it from time to time.
Its less than 2% faster than yours btw, so no big deal.

[Atexor]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

Video with old standard miner and older driver.

As you can see with
PL 100
GPU 100
RAM 770
hashrate never goes above 287MHs

Right now with latest drivers and 2-2fork miner and
PL 95
GPU 100
RAM 700
I got 353MHs.

Think about it.

Code:

[2017-12-11 17:59:56] GPU #3: EVGA GTX 1080 Ti, 70.99 MH/s
[2017-12-11 17:59:57] GPU #1: EVGA GTX 1080 Ti, 73.80 MH/s
[2017-12-11 18:00:01] GPU #4: EVGA GTX 1080 Ti, 69.55 MH/s
[2017-12-11 18:00:01] GPU #2: EVGA GTX 1080 Ti, 69.29 MH/s
[2017-12-11 18:00:01] GPU #0: EVGA GTX 1080 Ti, 70.94 MH/s
[2017-12-11 18:00:08] GPU #3: EVGA GTX 1080 Ti, 70.59 MH/s
[2017-12-11 18:00:09] GPU #1: EVGA GTX 1080 Ti, 73.43 MH/s
[2017-12-11 18:00:13] GPU #4: EVGA GTX 1080 Ti, 69.31 MH/s
[2017-12-11 18:00:13] GPU #2: EVGA GTX 1080 Ti, 69.73 MH/s
[2017-12-11 18:00:14] GPU #0: EVGA GTX 1080 Ti, 70.61 MH/s
[2017-12-11 18:00:21] GPU #3: EVGA GTX 1080 Ti, 70.31 MH/s
[2017-12-11 18:00:21] GPU #1: EVGA GTX 1080 Ti, 73.49 MH/s
[2017-12-11 18:00:22] accepted: 176/176 (diff 1.528), 353.37 MH/s yes!
[2017-12-11 18:00:22] GPU #2: EVGA GTX 1080 Ti, 69.64 MH/s
[2017-12-11 18:00:22] accepted: 177/177 (diff 3.568), 353.40 MH/s yes!

Dashboard reports even more:

I've downloaded manually that miner, changed directory name to "NVIDIA-Nanashi" because multimienr doesn't find that miner even I changed path in CcminerNanashi.ps1 file. I've approximately the same hashrate to ccminer by Ptruvot or Palgin - 51mh/s (instead 52mh/s). On miningpoolhub I've still much lower estimated hashrate than in miner. The same as previously...

I know it's should be the same because it's estimated with my sent shares - but both miningpoolhub and suprnovashows much lower hashrate and earnings compared to mining using other algorithms (coins).

[deg026]

it is there any documentation for your API?
as i understand it is modified from default from github
for example main quastion - how can i check through the API - values of columns:
Credited for Auto Exchange
and
On Exchange

is it possible??
tnx for any help!