[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[miningpoolhub]

@MiningPoolHub

Are there plans to reduce the Monero transaction fee?

Lowered it from 0.015 to 0.12
Transaction fee goes up and down.

Take a look at average fee charged from monero.
https://xmrchain.net/

You can see that 0.010~0.035 fee transactions are confirmed.

TXFee from pool is not intended for profit. It's just how monero network works and can't bypass this fee.

This is why many monero miners are using auto exchange feature. It pays much less.

[Myth888]

@MiningPoolHub

Are there plans to reduce the Monero transaction fee?

Lowered it from 0.015 to 0.12
Transaction fee goes up and down.

Take a look at average fee charged from monero.
https://xmrchain.net/

You can see that 0.010~0.035 fee transactions are confirmed.

TXFee from pool is not intended for profit. It's just how monero network works and can't bypass this fee.

This is why many monero miners are using auto exchange feature. It pays much less.

i want to add that monero tx fee is very unpredictable. It is totally different system than BTC or other coin. from what i read Tx fee is shared between everyone who sent a transaction on that block. More transaction less fee. Less transaction more fee per transaction. Do not blame any services be it a pool or wallet because it is how the coin was designed and how it should work. Alternatively the coin actually scales better than BTC as the size of the block is also versatile. There arent many transactions in monero hence the high fee. I may be wrong but this is what the developer explained in one article.

[sir_blacks]

as far as i knw excavator you are using was develop by nicehash. As they developed it they will lock it up only to be used for their pool. Greedy nicehash is to blame. It is best that we as miners exercise due diligence.

yes excavator was & it is dev by ppls what was & work for nicehash, but that not means is working only on they'r pool if you was read what i was write is working perfectly on Nano, Supernova, zpool or on any other ... only on here is not but if admin of pool decide to ban a miner apps is his decision

[aaronsace]

as far as i knw excavator you are using was develop by nicehash. As they developed it they will lock it up only to be used for their pool. Greedy nicehash is to blame. It is best that we as miners exercise due diligence.

yes excavator was & it is dev by ppls what was & work for nicehash, but that not means is working only on they'r pool if you was read what i was write is working perfectly on Nano, Supernova, zpool or on any other ... only on here is not but if admin of pool decide to ban a miner apps is his decision

NiceHash blocked MiningPoolHub on Excavator.

[sir_blacks]

as far as i knw excavator you are using was develop by nicehash. As they developed it they will lock it up only to be used for their pool. Greedy nicehash is to blame. It is best that we as miners exercise due diligence.

yes excavator was & it is dev by ppls what was & work for nicehash, but that not means is working only on they'r pool if you was read what i was write is working perfectly on Nano, Supernova, zpool or on any other ... only on here is not but if admin of pool decide to ban a miner apps is his decision

NiceHash blocked MiningPoolHub on Excavator.

aaronsace  sorry from first your affirmation i was undestend other way aka excavator is block by pool ... now you say dev from excavator was block this pool ? errr never mind i get headhake    i will move on > that is not working here < fine fine i will keep simple

[paulpoco]

From another thread:

I wondered why miningpoolhub was so abysmally slow, then found out they ratcheted their difficulty down to the minimum to cost users money and power and time but make it so their inadequate servers could keep up.

Sad to think that a business that is there, ostensibly, to be a facilitator of mining would attack their users in this manner rather than upgrade. I was getting 1/6th the usual rate on Lyra2REv2. After I found that tidbit, I realized why miningpoolhub sucked so very, very badly. Oh, and they never answered any tech support questions. Bad pool. Bad software. Just bad, all around.

Ah, yes, not many were ready for the outflux of users from Nicehash. But, they will be back to business as usual after the people flee their pools and software to go with far more trustworthy nicehash. Nicehash has answered every question I have ever thrown at them.

LOL, the hash from NiceHash went to MiningPoolHub anyway. All MiningPoolHub has ended up with is the hash split up amongst loads of users.

The Equihash difficulty is variable over time, not fixed.
The problem with Lyra2REv2 has always been the miners, not the pool.

MiningPoolHub is 10x bigger than even Zpool. Scaling is more than just pure resources; the software has to be continually improved from the original open source project.

NiceHash is not a pool and they take huge percentages from both sellers and buyers. If pools charged the same fees then they could employ people like NiceHash has.

Due to Nicehash going down, I know know they where taking it all, I get 2-3x more on MPH.  Plus Aaronsace MPM works so well.

[paulpoco]

If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at.

  Very big stupid anwser.

I try my best.

You guys should be a little more appreciative. Aaronsace is not part oh miningpoolhub and os taking the time to answer and help most people with questions. Some of which are just plain lack of due diligence. We understand this pool is not as easy as Nicehash. It was never meant to be that easy. Its a pool for miners that charge less than 1% and not 4%. There are other services that would be more user friendly for people who actually do not understand crypto and just want to have profit.

Once your setup is up and running there is really nothing left to do, it just works with MPH and MPM. 

Nicehash was rip off.  Did anyone watch the 1st video the 2 Nicehash guys released?  The 2nd guy in the video was investigated for crimes or did time?

[poby]

FEATURE REQUEST

It wouldn't be difficult to implement but would be a big improvement if you could set your timezone in your account and have all the transactions display in your local time.  Does my head in always converting from UTC to my time.

[MegoBasha]

etn pool is open with 0% fees for a week. 
but there is something with this pool europe.cryptonight-hub.miningpoolhub.com

i switched to us pool, and it is working 

thanks
Mego

Can you tell me the ip address by typing
ping europe.cryptonight-hub.miningpoolhub.com

I want to know which host is not working. I don't see any issue from my side actually.
Maybe temporary network problem.

172.104.49.55
45.79.217.166
45.79.192.137
XMR: Stratum - Cannot connect to europe.cryptonight-hub.miningpoolhub.com:5555
XMR: Stratum - Failed to connect, retry in 20 sec...

54.154.126.164 is working after that



XMR: Stratum - connecting to 'europe.cryptonight-hub.miningpoolhub.com' <45.79.217.166> port 5555 (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
-------------------------------------
XMR: Stratum - Cannot connect to europe.cryptonight-hub.miningpoolhub.com:5555
XMR: Stratum - Failed to connect, retry in 20 sec...
XMR: Stratum - connecting to 'europe.cryptonight-hub.miningpoolhub.com' <172.104.49.55> port 5555 (unsecure)
XMR: Stratum - Cannot connect to europe.cryptonight-hub.miningpoolhub.com:5555
XMR: Stratum - Failed to connect, retry in 20 sec...
GPU0 t=36C fan=57%
XMR: Stratum - connecting to 'europe.cryptonight-hub.miningpoolhub.com' <45.79.192.137> port 5555 (unsecure)
XMR: Stratum - Cannot connect to europe.cryptonight-hub.miningpoolhub.com:5555
XMR: Stratum - Failed to connect, retry in 20 sec...
GPU0 t=35C fan=57%
XMR: Stratum - connecting to 'eupool.electroneum.com' <54.154.126.164> port 5555 (unsecure)
XMR: Stratum - Connected (eupool.electroneum.com:5555) (unsecure)
XMR: 12/17/17-04:15:07 - SHARE FOUND - (GPU 0)
------------------------------

thanks
Mego

[MegoBasha]

XMR: Stratum - connecting to 'europe.cryptonight-hub.miningpoolhub.com' <45.79.207.32> port 20596 (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - Connected (europe.cryptonight-hub.miningpoolhub.com:20596) (unsecure)
XMR: 12/17/17-04:24:02 - SHARE FOUND - (GPU 0)
Share accepted (312 ms)!

------------------------------

[paulpoco]

FEATURE REQUEST

It wouldn't be difficult to implement but would be a big improvement if you could set your timezone in your account and have all the transactions display in your local time.  Does my head in always converting from UTC to my time.

Me too.

Or at least on the balance screen to have the time of the last transaction occurred.

[bitc0intalk]

The miningpoolhub scams with the transaction fee size!
Its my monero withdrawal.
No explanations about huge tx fee from the support.

^{16976265   2017-12-16 06:30:03 (UTC)   TXFee      Confirmed   47VvBUVE...4NMg9kSa                                    n/a   0.01500000
16976264   2017-12-16 06:30:03 (UTC)   Debit_MP   Confirmed   47VvBUVE...4NMg9kSa   f272e14d...9adee17b   n/a   0.05746817}

https://image.prntscr.com/image/b3X8ZIV_TeWxq8JmoARcWQ.png

oh f*ck. i dont check this. move hashrate to nanopool.

[SuperDerpBro]

Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?

[aaronsace]

Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?

Best leave it in for backup but you can remove it.

[paulpoco]

Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?

It might take a lot longer to get high enough balance of BTC on zpool etc, so it is up to you.  Don't forget if BTC keeps going up, your earnings at zpool go up too.

[SuperDerpBro]

Alright, Thanks. Just wanted to make sure it wouldn't mess anything up if i left in or took it out.

Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?

It might take a lot longer to get high enough balance of BTC on zpool etc, so it is up to you.  Don't forget if BTC keeps going up, your earnings at zpool go up too.

I don't use the other pools because it doesn't switch there often enough. End up with small amounts there for super long times.

[paulpoco]

Alright, Thanks. Just wanted to make sure it wouldn't mess anything up if i left in or took it out.

Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?

It might take a lot longer to get high enough balance of BTC on zpool etc, so it is up to you.  Don't forget if BTC keeps going up, your earnings at zpool go up too.

I don't use the other pools because it doesn't switch there often enough. End up with small amounts there for super long times.

I am redoing my Benchmarking because I added another 1070 And so far Zpool has the top 2 spots Lyra2RE2 that will payout almost double compared to the the rest.

[SuperDerpBro]

Hmm.. maybe i will re-run mine. I read somewhere they steal like 20% but i have no idea if that is true lol.

[Christopher761]

The miningpoolhub scams with the transaction fee size!
Its my monero withdrawal.
No explanations about huge tx fee from the support.

^{16976265   2017-12-16 06:30:03 (UTC)   TXFee      Confirmed   47VvBUVE...4NMg9kSa                                    n/a   0.01500000
16976264   2017-12-16 06:30:03 (UTC)   Debit_MP   Confirmed   47VvBUVE...4NMg9kSa   f272e14d...9adee17b   n/a   0.05746817}

https://image.prntscr.com/image/b3X8ZIV_TeWxq8JmoARcWQ.png

oh f*ck. i dont check this. move hashrate to nanopool.

And from the Nanopool information

Pool settings
Pool settings

Fee is 1%
Payouts several times a day
Payout commission 0.015 XMR
Default minimum payout is 1 XMR
Share difficulty is static and equal to 120000.

https://xmr.nanopool.org/help

[Miner2525]

Hmm.. maybe i will re-run mine. I read somewhere they steal like 20% but i have no idea if that is true lol.

True.  Last 10-20 pages: https://bitcointalk.org/index.php?topic=1260863.2780