sansansan41
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 17, 2018, 06:11:35 PM |
|
Hello CryptoDredge I am running windows 8.1. I have one 1080Ti. Both the newer and older versions of cryptodredge crashes my card after the dev fee session is over. Any help would be greatly appreciated. Thanks
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
September 17, 2018, 09:13:35 PM |
|
getting 5.1MH/s of lyra2z @ 63% tdp and mild overclocking on a 1080ti
|
|
|
|
Divinity666
Jr. Member
Offline
Activity: 312
Merit: 2
|
|
September 17, 2018, 09:57:21 PM |
|
I get on avg. 5800mhs@197wt with 1080Ti's and 4520mhs@152wt with 1080's in lyra2z and 77.5mhs@195wt with 1080Ti's and 58.5@148wt with 1080's in lyra2rev2.
|
|
|
|
Josefonaut
Newbie
Offline
Activity: 36
Merit: 0
|
|
September 18, 2018, 12:27:00 PM |
|
Excellent work on improving CryptoDredge. Had used version 0.40 to mine neoscrypt, Just downloaded ver 0.91 to compare hashrates on phi2 between it z-enemy 1.20 32bit On my 1080 hashrate rose from 5.1mh to 6.8mh (pl 100 mem +450 core +80) On my 1080ti hashrate rose from 7.2mh to 9.0mh(pl 120 mem +450 core +150) (9.2mh with ethenlargementpill and mem +290 but miner was unstable) 3.5mh increase in performance over two cards is fantastic. I tip my hat to you good sir
|
|
|
|
MiningTaken
Newbie
Offline
Activity: 28
Merit: 0
|
|
September 21, 2018, 04:58:16 PM |
|
Hi cryptodredge dev. Please help. I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10). I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti. Is this a bug? Need your advise. Thank you.
|
|
|
|
ggillies
Newbie
Offline
Activity: 19
Merit: 0
|
|
September 21, 2018, 07:58:08 PM |
|
Hi cryptodredge dev. Please help. I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10). I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti. Is this a bug? Need your advise. Thank you.
Try "--intensity=5"
|
|
|
|
MiningTaken
Newbie
Offline
Activity: 28
Merit: 0
|
|
September 21, 2018, 11:01:27 PM |
|
Hi cryptodredge dev. Please help. I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10). I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti. Is this a bug? Need your advise. Thank you.
Try "--intensity=5" Yes, I tried that and it worked. Thank you! Yet miner still crashed though (even though it runs well with Lyra2z with the same OC). Well, I guess I need to lower the OC.
|
|
|
|
HiddenA
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 24, 2018, 08:30:15 AM |
|
Periodically I get an error on Lyra2z - "The semaphore timeout period has expired" With what it can be connected? Other miners do not issue such errors.
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 24, 2018, 11:39:18 AM |
|
Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
|
|
|
|
netto7
Jr. Member
Offline
Activity: 252
Merit: 4
|
|
September 24, 2018, 02:06:43 PM |
|
Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
1080ti normally it use around 250 watt per card
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 24, 2018, 04:13:03 PM |
|
yeah but lyra2z was always was drawing about 30 % of the gpu.. not more.. with older ccminers (2017) Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
1080ti normally it use around 250 watt per card
|
|
|
|
Divinity666
Jr. Member
Offline
Activity: 312
Merit: 2
|
|
September 24, 2018, 09:11:56 PM |
|
Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
I get ~5.9MH\s @ 197Wt
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 25, 2018, 05:59:04 AM |
|
Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
I get ~5.9MH\s @ 197Wt what settings if i may ask? thank you i was trying 75 TPD, 85 - 130 Core and 0 Mem
|
|
|
|
netto7
Jr. Member
Offline
Activity: 252
Merit: 4
|
|
September 25, 2018, 05:27:07 PM |
|
yeah but lyra2z was always was drawing about 30 % of the gpu.. not more.. with older ccminers (2017) Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt anyone else ?
1080ti normally it use around 250 watt per card draw more power 30% but you mine faster around 80% ccminer mine lyra2z around 3.5MH for 1080ti use cryptodredge it have 6.1MH
|
|
|
|
LordPower
Newbie
Offline
Activity: 19
Merit: 54
|
|
September 25, 2018, 10:43:33 PM |
|
I get on Lyra2v2 68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s on 1060TI I get 21.5-22mh/s with CCMiner and Dredge I get 25mh/s
|
|
|
|
Dr_Victor
|
|
September 26, 2018, 11:32:21 AM |
|
I get on Lyra2v2 68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s on 1060TI I get 21.5-22mh/s with CCMiner and Dredge I get 25mh/s
What is it 1060TI?
|
yobit.net is banned from signatures
|
|
|
Divinity666
Jr. Member
Offline
Activity: 312
Merit: 2
|
|
September 26, 2018, 12:57:51 PM |
|
what settings if i may ask? thank you
i was trying 75 TPD, 85 - 130 Core and 0 Mem
I use curve OC, though for each card curve is a bit different cos cards have different OC potential, but not by much. Memory is set to 5003(-502mhz). And then I adjust power consumption using PL, e.g. for Stris OC's 72%, for Gigabyte OC's its 79%. So you gotta tune your cards individually, my settings might not work for you. If you are mining only lyra2z algorithm you dont need to limit PL at all, just find proper vcore\clock combination that will make ur card's draw below 200wt. It's just I mine on Nicehash, so I had to make curves for 3 algos for my cards: x16r, lyra2z\rev2, and I also got to use PL hence in lyra2z I'll get more powerdraw (though also higher h\r) if I allow 1080ti's to mine at max clock my curve has. With PL they usually stick to 825-831mV and their respective clocks. ps Here is example of a curve of 1 of my strix's card: I get on Lyra2v2 68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s
I get a bit higher h\r - 76-77Mh\s with power draw around 195Wt.
|
|
|
|
ztaz
Member
Offline
Activity: 602
Merit: 11
|
|
September 26, 2018, 03:37:32 PM |
|
0.9.2 - phi2 - on 1080 - 7,5-7,8 Mh/s
|
|
|
|
Dr_Victor
|
|
September 26, 2018, 06:54:50 PM |
|
Are there any speed-up's in 0.9.2?
|
yobit.net is banned from signatures
|
|
|
Dr_Victor
|
|
September 26, 2018, 07:15:57 PM |
|
# Release 0.9.2 - (September 26, 2018)
* New CryptoNightSaber (BitTube) algorithm * Improve Allium and Phi2 for 1070, 1070 Ti, 1080, 1080 Ti * Allow to set intensity per GPU * Fix failover mechanism * Disable miner to auto-start after system restart * Add crash reporting mechanism. Check Readme for more information
|
yobit.net is banned from signatures
|
|
|
|