[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[Sebahl]

What are the overclock setting you guys are using for RX470/480/570/580 for KAWPOW?

[Guigs321]

What are the overclock setting you guys are using for RX470/480/570/580 for KAWPOW?

1100 Mhz for GPU, 2000 Mhz for VRAM, you have to wait a little before the Mh/s stabilize.

[FP91G]

I have the same problem. I upgraded BIOS 3 times. After increasing the memory frequencies I have a lot of rejected shares.
MSI Armor RX470 4Gb . TeamRedMiner latest ver.Hive OS.
If you have any proven straps or bios, please share.

[lncm]

Hi there, help me here with linux version.

Using Mint 20.1, Vega 56, amdgpu-pro 20.45.

Trying to mine a cnr coin, but all I get is

Code:

~/teamredminer-v0.8.1-linux$ ./start_cnr.sh
          Team Red Miner version 0.8.1
[2021-02-13 19:04:22] Failed to list OpenCL platforms.
[2021-02-13 19:04:22] Successful clean shutdown.

Are those AMD drivers not supported?

Thanks.

Anyone? It's a bit annoying to have to use windows to mine. 

[FP91G]

Hi there, help me here with linux version.

Using Mint 20.1, Vega 56, amdgpu-pro 20.45.

Trying to mine a cnr coin, but all I get is

Code:

~/teamredminer-v0.8.1-linux$ ./start_cnr.sh
          Team Red Miner version 0.8.1
[2021-02-13 19:04:22] Failed to list OpenCL platforms.
[2021-02-13 19:04:22] Successful clean shutdown.

Are those AMD drivers not supported?

Thanks.

Anyone? It's a bit annoying to have to use windows to mine. 

Have you tried mining other coins?
If they have the same error, then download the latest hive os for AMD Vega
https://hiveos.farm/install/
What is cnr coin
I didn't find it in the list of coins to mine

[lncm]

CN/R is the algo, coin is Lethean.

[ivomm]

I can't make TRM kawpow to work for RX 560 cards on SMOS. It starts with 0 hash no matter the OC values. Is there a way to make it work?

[peterboy1]

Have anyone get a lot of stales in eth sparkpool? Jobs are coming too fast. My latency is fine. Is there any remedy?

[slklylnlelt]

I switched my rig over from ETH a week ago to try ravencoin out, got teamredminer.  I have 3 RX480 8GB and they are running at  9.6, 9.6, and 13.3 MH/s.  I have been seeing that the 480 4GB get about this same hashrate, so its making me wondering if mine is a bit low.  I tried putting them in mode B, but the stats are showing A576 for each.  This is my bat file:

teamredminer.exe -a kawpow -o stratum+tcp://us-solo-rvn.2miners.com:7070 -u RBtMNRyq2QxJxF***fuLJ1WENbdjWzw.cryptodyne -p x --cn_config 9+9 --prog_config=B576 --enable_compute

Am i missing something or doing something stupid?
thanks

https://prnt.sc/100d6vw

[Riptide_NVN]

Hi team.  Sorry for the ignorant question.

When downloading the miner client archive file from git there doesn't seem to be any checksums to compare against.  Is there any way to verify the file is valid?  I am running on a personal computer and not a rig so am trying to be as careful as I can be to avoid malware.

TIA

[OrangePower]

Hi

I`m new to mining with TRM and I want to try it.

How do I setup TRM with these options I have in phoenix miner?

I`m using 8pcs rx580 8GB cards with hynix memory and i`m getting 32mhs in phoenixminer with this setup:

-lidag 2 -tt 55 -fanmin 40 -fanmax 75 -rxboost 1 -cclock 1200 -mclock 2250 -cvddc 840 -mvddc 860 -r 1

Thank you for help!

лeнь пepeвoдить coopeнтиpyйтecь caми, вaм пoтpeбyeтcя pяд пpoгpaмм в этoм минyc TRM, нo в ocтaльнoм тoлькo плюcы, дpaйвep ATI нe вышe 20.5.1 инaчe нe бyдeт paбoтaть OverdriveNTool2.9, вce кoмaнды oпиcaны в фaйлe USAGE.txt, тaк жe пepeд зaпycкoм пoтpeбyeтcя зaпycтить oдин paз фaйл peгиcтp windows_tdr_fix.reg, пpимep кoмaнд нижe

C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 1 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 2 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 3 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 4 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 5 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 6 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 7 --ref 30

C:\Miner\ATIWinFlashBios2.9.3\OverdriveNTool2.9.exe -ac1 GPU_P7=1260;887 MEM_P2=2300;750 -ac2 GPU_P7=1240;1000 MEM_P2=2280;750 -ac3 GPU_P7=1240;875 MEM_P2=2300;750 -ac4 GPU_P7=1260;1000 MEM_P2=2300;750 -ac5 GPU_P7=1240;1006 MEM_P2=2300;750 -ac6 GPU_P7=1240;1000 MEM_P2=2300;750 -ac7 GPU_P7=1240;905 MEM_P2=2280;750 -ac8 GPU_P7=1240;987 MEM_P2=2280;750

C:\Miner\TeamRedMiner\teamredminer.exe --enable_compute --uac -a ethash --pool_force_ensub -o stratum+tcp://your_pool:port -u 0x***********.your_name_rig -p x --init_style=1 or 2 or 3 --eth_dag_slowdown=4 (0-9 similar to -lidag) --eth_worker your_name_rig --eth_stratum_mode=(ethproxy or nicehash or stratum) --eth_variant_mode=ethash --eth_alloc_epoch=10 --eth_config=A --temp_limit=63 --temp_resume=50 --fan_control=58:70:80:50:1:100 --fan_default_polaris=58:70:80:50:1:100
гдe --fan_control=core:junc:mem:fan start:fan min:fan max

Thank you for advice but I cant set up miner, one big problem is that google translate does not translate from rusian language.

I see that I need one SW for setting tunning and then miner to mine. But in miner there is also a lot of options activated and I dont know if I must use all of them.

[filo1992]

Hi, I'm trying TRM, but I can't keep coreclock and vddc constants.

and why is socMHZ at 0?

for gpu settings use overdrive

https://ibb.co/646vdkY

[powvex]

Im using this miner for my ravencoins. is there any way I could read gpu temps from web service or my server ip remotely?

[Littlegrand]

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now?  The site I used before is no longer active.

Thanks

[Danz0r77]

Who had a thread with a problem with a constant miner crash?

[Dr_Victor]

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now?  The site I used before is no longer active.

Thanks

People can mod their cards by Red BIOS Editor.

[Littlegrand]

Ive bought a new card (have not in a long time) and was wondering where people get there bios mods now?  The site I used before is no longer active.

Thanks

People can mod their cards by Red BIOS Editor.

I looked it up but I am not sure the average person such as myself would have any clue what to do and therefore could damage a card easily.  There used to be sites where people had your card/memory type bios posted and you could download a bios(all rated) and flash that one.  I take it these do not exist any longer?

Thanks

[nik-qz]

Hi

I`m new to mining with TRM and I want to try it.

How do I setup TRM with these options I have in phoenix miner?

I`m using 8pcs rx580 8GB cards with hynix memory and i`m getting 32mhs in phoenixminer with this setup:

-lidag 2 -tt 55 -fanmin 40 -fanmax 75 -rxboost 1 -cclock 1200 -mclock 2250 -cvddc 840 -mvddc 860 -r 1

Thank you for help!

C:\Miner\AMD_Memory\WinAMDTweak.exe --i 0 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 1 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 2 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 3 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 4 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 5 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 6 --ref 30
C:\Miner\AMD_Memory\WinAMDTweak.exe --i 7 --ref 30

C:\Miner\ATIWinFlashBios2.9.3\OverdriveNTool2.9.exe -ac1 GPU_P7=1200;840 MEM_P2=2250;860 -ac2 GPU_P7=1200;840 MEM_P2=2250;860 -ac3 GPU_P7=1200;840 MEM_P2=2250;860 -ac4 GPU_P7=1200;840 MEM_P2=2250;860 -ac5 GPU_P7=1200;840 MEM_P2=2250;860 -ac6 GPU_P7=1200;840 MEM_P2=2250;860 -ac7 GPU_P7=1200;840 MEM_P2=2250;860 -ac8 GPU_P7=1200;840 MEM_P2=2250;860

the countdown starts with -ac1 if you have a graphics core built into the processor, or with -ac0 if there is none

C:\Miner\TeamRedMiner\teamredminer.exe --enable_compute --uac -a ethash --pool_force_ensub -o stratum+tcp://your_pool:port -u 0x***********.your_name_rig -p x --init_style=1 or 2 or 3 --eth_dag_slowdown=4 (0-9 similar to -lidag) --eth_worker your_name_rig --eth_stratum_mode=(ethproxy or nicehash or stratum) --eth_variant_mode=ethash --eth_alloc_epoch=10 --eth_config=A --temp_limit=63 --temp_resume=50 --fan_control=58:70:80:50:1:100 --fan_default_polaris=58:70:80:50:1:100

where --fan_control=core:junc:mem:fan start:fan min:fan max

Thank you for advice but I cant set up miner, one big problem is that google translate does not translate from rusian language.

I see that I need one SW for setting tunning and then miner to mine. But in miner there is also a lot of options activated and I dont know if I must use all of them.

you will need several programs in this minus TRM, but otherwise only pluses, the ATI driver is not higher than 20.5.1 otherwise OverdriveNTool2. 9 will not work, all the commands in this file are described USAGE.txt, also, before starting, you will need to run the file register windows_tdr_fix.reg once , an example of the commands below. The presented commands are almost the minimum necessary set, i.e. it is better to use them

[rstieb]

Quick question.  Just picked up a used Sapphire Pulse RX 5700 XT card.  It's seems to be running considerably hotter then all my other 5700XT cards.  Fan seems to run at about 90% with MemTemp at 82.  Other cards are running 30-50% at 80.  Only thing that looks different on this card is the SocMHZ is at 1227 and the others are 1000 or less..

Any thoughts/help would be greatly appreciated..

[nik-qz]

Quick question.  Just picked up a used Sapphire Pulse RX 5700 XT card.  It's seems to be running considerably hotter then all my other 5700XT cards.  Fan seems to run at about 90% with MemTemp at 82.  Other cards are running 30-50% at 80.  Only thing that looks different on this card is the SocMHZ is at 1227 and the others are 1000 or less..

Any thoughts/help would be greatly appreciated..

Usually on Pulses, if the memory frequency is below 1824 MHz, then the SOC frequency is 950mV, if the memory frequency is above 1824 MHz, then the SOC frequency is 1085 MHz, in order for the SOC frequency to become even higher, the memory frequency on this card must be significantly higher than these values. in general, the maximum frequency of SOC 1267 Mhz is registered in the BIOS, look at what frequency the memory works, if it is below or near these values, then there is clearly a problem with the card with the choice of the desired voltage, it is possible that this is an unsuccessful instance of a video card