BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:51:08 PM |
|
We're on block 200 and still no payments from vtcpool
ummmm
Yeah I seem to be having some issue with the payout scripts, the MON is being mined and shares are being tracked in redis, but the payout script we're trying to debug at the moment - I believe it may just be me having the issue. Might be best to move elsewhere while I debug it, we are still in the minimal reward (1 MON) starting blocks anyway, but obviously I will do my best to get it back running ASAP
|
|
|
|
ymer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:53:38 PM |
|
We're on block 200 and still no payments from vtcpool
ummmm
Yeah I seem to be having some issue with the payout scripts, the MON is being mined and shares are being tracked in redis, but the payout script we're trying to debug at the moment - I believe it may just be me having the issue. Might be best to move elsewhere while I debug it, we are still in the minimal reward (1 MON) starting blocks anyway, but obviously I will do my best to get it back running ASAP Alright, moved to a normal VTC pool in the meantime. But what about VTC, are those coins being mined but also having problems with the scrypt?
|
|
|
|
cubevtc
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:54:22 PM |
|
I'm mining on my own p2pool node with my lowly 750ti at 150khs, been running since the around block 10 and we're now at ~200. I've still not go any blocks, is it worth sticking with my own node and solomining or is it time to move onto a proper node?
solo is waste of time for me also single card miner this p2pool works fine http://p2proxy.net/ you can check your stats as well here is an example of my stats http://p2proxy.net/stats/Vv3LtjECNEg3PoTzGjJ2uHnSzSw5JwupxoCorrect me if I am wrong, I believe p2proxy.net belongs to one of the Vertcoin developers. Can the Vertcoin dev team share out how to get the stats out? Please?
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:55:01 PM |
|
We're on block 200 and still no payments from vtcpool
ummmm
Yeah I seem to be having some issue with the payout scripts, the MON is being mined and shares are being tracked in redis, but the payout script we're trying to debug at the moment - I believe it may just be me having the issue. Might be best to move elsewhere while I debug it, we are still in the minimal reward (1 MON) starting blocks anyway, but obviously I will do my best to get it back running ASAP Alright, moved to a normal VTC pool in the meantime. But what about VTC, are those coins being mined but also having problems with the scrypt? Yes, everything is being mined/tracked (VTC and MON), just that the payout script has choked on something, we're trying to figure it out right now. If it continues much longer I'll shut down my p2proxy to prevent people mining when payouts may be delayed, and they'll have to move elsewhere while we fix it.
|
|
|
|
Antipatro
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:56:21 PM |
|
We're on block 200 and still no payments from vtcpool
ummmm
Yeah I seem to be having some issue with the payout scripts, the MON is being mined and shares are being tracked in redis, but the payout script we're trying to debug at the moment - I believe it may just be me having the issue. Might be best to move elsewhere while I debug it, we are still in the minimal reward (1 MON) starting blocks anyway, but obviously I will do my best to get it back running ASAP It might be more then you Boris. I see coins in the wallet and the payour script say it is tracking several thousand shares but it can not see the coins in the wallet? Did I config the payout script worng or can it be a bug some where? To every one mining at http://176.10.212.237:9555Looks like the payout script taracks shares. But can not find coins in the wallet. 2014-05-02 21:55:35.003130 Available balance 0.00000000 MON, 0.00000000 VTC 2014-05-02 21:55:35.003228 Shares backlog 16365 2014-05-02 21:55:35.003297 Payable shares: 1 2014-05-02 21:55:35.003352 No user with a high enough balance or not enough coins to payout. 2014-05-02 21:55:35.005652 All transactions failed. 2014-05-02 21:55:35.005776 Retrying in 5 minutes. Might be good to switch back to standard port that should work as normal for VTC. 9174 on my pool or some where else, I do not want any one to lose coins.
|
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:58:01 PM |
|
I'm mining on my own p2pool node with my lowly 750ti at 150khs, been running since the around block 10 and we're now at ~200. I've still not go any blocks, is it worth sticking with my own node and solomining or is it time to move onto a proper node?
solo is waste of time for me also single card miner this p2pool works fine http://p2proxy.net/ you can check your stats as well here is an example of my stats http://p2proxy.net/stats/Vv3LtjECNEg3PoTzGjJ2uHnSzSw5Jwupxop2proxy is also running on p2pool network1 so low hash rate you won't see anyshares. You're better off going to P2pool network3 like I am, running my own local p2pool connected to network3 since my hashrate is 846KH/s ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
freddingo
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:59:21 PM |
|
Correct me if I am wrong, I believe p2proxy.net belongs to one of the Vertcoin developers. Can the Vertcoin dev team share out how to get the stats out? Please?
pull them straight from the database
|
|
|
|
haos
Newbie
Offline
Activity: 57
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 07:59:45 PM |
|
Sgminer reports this on all my rigs every minute or two: getaddrinfo() in setup_stratum_socket() returned -2: Name or service not known I've changed the pool but it still appears. May it be a wrong/not working another pool from the sgminer.conf list or it comes from the pool i'm mining on?
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:01:34 PM |
|
Seems I fixed the payout script issue on vtcpool.co.uk - a payout just went out of the first MON.
2014-05-02 21:00:32.767705 Completed mon transaction aced61914f49f68b54bed6fa2c9fc1cd50fe6aa0bc1280bfbd328f0c3cd01d32: 2014-05-02 21:00:32.768029 MGekRK1kmciVtNNsWEvpdtWpmWzNNDG1wU 1.20945000 MON 2014-05-02 21:00:32.768173 MG3KSJKC8VEDHCK7ZFMRJ1etDqJj8QrKkh 1.47872333 MON 2014-05-02 21:00:32.768327 MAx1j154ACFtcbzP9kSntAeKxQg8QqgB1G 2.72932333 MON 2014-05-02 21:00:32.768476 MLCFqaZtnpvCQ9VT4b5XgCGnHfBtn4dCqP 1.78718089 MON 2014-05-02 21:00:32.768625 MBThMW4Zx8irBJo7jbii3CstamcXmvatLq 1.22118978 MON
Am about to put block explorer online now, forgot about that....
|
|
|
|
whatdidshedo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:02:46 PM |
|
I'm mining on my own p2pool node with my lowly 750ti at 150khs, been running since the around block 10 and we're now at ~200. I've still not go any blocks, is it worth sticking with my own node and solomining or is it time to move onto a proper node?
solo is waste of time for me also single card miner this p2pool works fine http://p2proxy.net/ you can check your stats as well here is an example of my stats http://p2proxy.net/stats/Vv3LtjECNEg3PoTzGjJ2uHnSzSw5Jwupxop2proxy is also running on p2pool network1 so low hash rate you won't see anyshares. You're better off going to P2pool network3 like I am, running my own local p2pool connected to network3 since my hashrate is 846KH/s ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) can you give me link to one that has merged mining , when i search for low latency http://coin.cubeconnex.com/poollist/ all links are on 9174(does that mean it's only mining vert) i'm a single card miner 245 kh,
|
|
|
|
|
S_tring
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 252
Merit: 102
OPEN Platform - Powering Blockchain Acceptance
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:04:08 PM |
|
Should perhaps mention (again) that if you're the only person mining on your node you can completely disregard the proxy solution, you don't need it. Just adding --merged http://monoclerpc:YOURLONGPASSWORDHERE@127.0.0.1:6888 to the p2pool command line is all you need . The same if I have N rigs on my personal node with personal network? Yes, vertcoin payouts will work as normal, but monocle coins will pool up in the nodes wallet. But you can make a simple "sendtoaddress" cronjob that runs every few minutes checking for matured coins if you want to send them somewhere else. Keep in mind that you're solomining monocle then etc I don't understand this part. I start p2pool with my VTC wallet address in the command so I know my vert will be sent there, but how do I get my monocle payments sent to my MON wallet? I thought having the MON address as my miner password was all I had to do?
|
|
|
|
freddingo
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:05:28 PM |
|
Running a pool here - Seeing quite a bit of activity in the Mysql database Seeing 1 Mon in the wallet The python payout script is saying that no one has a balance to pay - I am still getting paid VTC pretty regularly though...
Sample from
mysql> select * from stats_shares;
| 3404 | 2014-05-02 13:02:10 | Vnrv2wrKabnuz1DMHC3ZbZHLMNmUgpmLKC | MQudPTCochGUcd6zkRUGJvVKVwpHC6RJkm | 0.002 | 0.001 | 0.000409597448 | 244.14214616 | 2 | 0 | 0 | 1 | +------+---------------------+------------------------------------+------------------------------------+------------+------------+----------------+--------------+---------+---------+---------+-------+ 3404 rows in set (0.03 sec)
errors from the payout script:
Payable shares: 1 2014-05-02 12:55:51.511093 No user with a high enough balance or not enough coins to payout. 2014-05-02 12:55:51.511615 All transactions failed. 2014-05-02 12:55:51.511705 Retrying in 5 minutes. 2014-05-02 13:00:51.613265 Fetching shares from database... 2014-05-02 13:00:51.643596 Available balance 0.00000000 MON, 0.00000000 VTC 2014-05-02 13:00:51.643676 Shares backlog 3360 2014-05-02 13:00:51.643719 Payable shares: 1 2014-05-02 13:00:51.643748 No user with a high enough balance or not enough coins to payout. 2014-05-02 13:00:51.644300 All transactions failed.2014-05-02 13:00:51.644395 Retrying in 5 minutes.
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:06:04 PM |
|
I don't understand this part. I start p2pool with my VTC wallet address in the command so I know my vert will be sent there, but how do I get my monocle payments sent to my MON wallet? I thought having the MON address as my miner password was all I had to do?
Assuming you're mining on your own private p2pool node, your VTC will be paid as usual, but you don't need to specify a MON address as password, and your MON will go straight into the mon wallet on the node itself, so you just need to periodically send it off to your desktop etc.
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:07:41 PM |
|
2014-05-02 13:00:51.643719 Payable shares: 1 2014-05-02 13:00:51.643748 No user with a high enough balance or not enough coins to payout. 2014-05-02 13:00:51.644300 All transactions failed.2014-05-02 13:00:51.644395 Retrying in 5 minutes.
Yeah because MON has mandatory transaction fees (since it mines so fast - it'll all be mined in ~5.5 years) the scripts won't payout less than 1 MON so that the fees are a small proportion of the users payout. You can modify that option in the sharelogger config file if you want, but the default is 1.0 for this reason. So the payouts will run once a user has enough shares to have a total of >1MON payable. Especially since we're still in the first blocks when the rewards are low and ramp up to the full block reward by block 1000, it may take a while for any of your users to have the requisite balance payable.
|
|
|
|
S_tring
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 252
Merit: 102
OPEN Platform - Powering Blockchain Acceptance
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:11:54 PM |
|
I don't understand this part. I start p2pool with my VTC wallet address in the command so I know my vert will be sent there, but how do I get my monocle payments sent to my MON wallet? I thought having the MON address as my miner password was all I had to do?
Assuming you're mining on your own private p2pool node, your VTC will be paid as usual, but you don't need to specify a MON address as password, and your MON will go straight into the mon wallet on the node itself, so you just need to periodically send it off to your desktop etc. Thanks, Boris. I'm new to p2pool... how do I send from MON node to wallet?
|
|
|
|
OPTiK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:12:55 PM |
|
Is there anyway to verify mon shares are being submitted and accepted?
|
|
|
|
ThePeePs
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 350
Merit: 250
https://cryptassist.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:14:36 PM |
|
I'm having an issue while trying to setup cabal xxxxxx@p2pool:~/proxypool$ cabal configure Resolving dependencies... cabal: Could not resolve dependencies: trying: proxypool-0.1.0.0 (user goal) next goal: base (dependency of proxypool-0.1.0.0) rejecting: base-4.5.0.0/installed-40b... (conflict: proxypool => base>=4.6 && <4.7) Dependency tree exhaustively searched. xxxxxx@p2pool:~/proxypool$ cabal --force-reinstalls install "base >=4.6" Resolving dependencies... cabal: Could not resolve dependencies: next goal: base (user goal) rejecting: base-4.7.0.0, 4.6.0.1, 4.6.0.0 (only already installed instances can be used) rejecting: base-4.5.1.0, 4.5.0.0/installed-40b..., 4.5.0.0, 4.4.1.0, 4.4.0.0, 4.3.1.0, 4.3.0.0, 4.2.0.2, 4.2.0.1, 4.2.0.0, 4.1.0.0, 4.0.0.0, 3.0.3.2, 3.0.3.1 (global constraint requires >=4.6) Dependency tree exhaustively searched.
Note: when using a sandbox, all packages are required to have consistent dependencies. Try reinstalling/unregistering the offending packages or recreating the sandbox.
I already tried dropping text to 1.0.0.1, but got the same error. Running Debian wheezy (7) 64 bit Any ideas?
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:15:01 PM |
|
I don't understand this part. I start p2pool with my VTC wallet address in the command so I know my vert will be sent there, but how do I get my monocle payments sent to my MON wallet? I thought having the MON address as my miner password was all I had to do?
Assuming you're mining on your own private p2pool node, your VTC will be paid as usual, but you don't need to specify a MON address as password, and your MON will go straight into the mon wallet on the node itself, so you just need to periodically send it off to your desktop etc. Thanks, Boris. I'm new to p2pool... how do I send from MON node to wallet? monocled sendtoaddress Mwhatever-monocle-address-here AMOUNT
|
|
|
|
BorisTheSpider (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 02, 2014, 08:15:29 PM |
|
I'm having an issue while trying to setup cabal xxxxxx@p2pool:~/proxypool$ cabal configure Resolving dependencies... cabal: Could not resolve dependencies: trying: proxypool-0.1.0.0 (user goal) next goal: base (dependency of proxypool-0.1.0.0) rejecting: base-4.5.0.0/installed-40b... (conflict: proxypool => base>=4.6 && <4.7) Dependency tree exhaustively searched. xxxxxx@p2pool:~/proxypool$ cabal --force-reinstalls install "base >=4.6" Resolving dependencies... cabal: Could not resolve dependencies: next goal: base (user goal) rejecting: base-4.7.0.0, 4.6.0.1, 4.6.0.0 (only already installed instances can be used) rejecting: base-4.5.1.0, 4.5.0.0/installed-40b..., 4.5.0.0, 4.4.1.0, 4.4.0.0, 4.3.1.0, 4.3.0.0, 4.2.0.2, 4.2.0.1, 4.2.0.0, 4.1.0.0, 4.0.0.0, 3.0.3.2, 3.0.3.1 (global constraint requires >=4.6) Dependency tree exhaustively searched.
Note: when using a sandbox, all packages are required to have consistent dependencies. Try reinstalling/unregistering the offending packages or recreating the sandbox.
I already tried dropping text to 1.0.0.1, but got the same error. Running Debian wheezy (7) 64 bit Any ideas? Sorry, only tested on recent ubuntu, no idea on debian.
|
|
|
|
|