Claymore's CryptoNote AMD GPU Miner v11.3

[hamesh]

Okay this is weird.  Wondering if anyone else has experienced this.  Have four rigs mining monero.  Three have 2 card with ~1700 hashes each, get around 3500 shares every 30 minutes.  The fourth rig has 6 rx470 at ~3600 hashes, but that one only shows ~1500 shares over 30 minutes.  That's like 1/4 the of the shares the other three rigs do.

If run three instances of claymore with 2 cards each, my shares increase to nearly 5500 over 30 minutes for each of the three instances of two rx470 each - just ~1200 hashes a piece.

Why would running more cards produce fewer shares than running the fewer cards in more instances of claymore?  I've been running these for a few months now - have no idea why...

[1715562394]

1715562394

[1715562394]

1715562394

[1715562394]

1715562394

[hamesh]

Never mind.  Didn't factor in difficulty.  duh!

[notbatman]

... failed

Try -h 860

[Grigoriy Melnikov]

Hello, I have maps of HD 6990. Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks in advance!

[ustcstone]

Hello

Running the this version on pandaminer. I want to join nanopool for new XMR mining (ie. post April 6th).

Would appreciate comment on output below. Sorry if its long. But at the bottom you can see several GPUs 'failed''.

C:\Users\Administrator\Desktop\pandaminer_tool>NsGpuCNMiner.exe -xpool stratum+ssl://xmr-us-west1.nanopool.org:14433 -xwal 48XcJDfxVtPW9iNJ22YfSuebKLtBwQaj8CS1wCUkVJ3wDJjnPGnW7p28p71Z1dZBsgW9GzTiUWwYmgZ Pbhf6m9wVUt48SEP -xpsw x -pow7 1

赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯突
?          Claymore's CryptoNote AMD GPU Miner v11.3            ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯图

XMR: 6 pools are specified
Main Monero pool is xmr-us-west1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 8
GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 3:0:0)
GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 4:0:0)
GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 5:0:0)
GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 6:0:0)
GPU #4: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 8:0:0)
GPU #5: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 9:0:0)
GPU #6: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 10:0:0)
GPU #7: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 11:0:0)
POOL version
GPU #0 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #1 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #2 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #3 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #4 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #5 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #6 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #7 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
Total cards: 8
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
XMR: Stratum - connecting to 'xmr-us-west1.nanopool.org' <45.63.61.87> port 14433 (SSL/TLS)

SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-us-west1.nanopool.org:14433) (SSL/TLS)
GPU 3, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
Quit...

C:\Users\Administrator\Desktop\pandaminer_tool>

I think -h 1792 is too much,my 580 8G can only handle 1200.....try lower to under 900

[gazu]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

[Branko]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

[cryptosize]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

Does v11.3 support TeraScale/VLIW GPUs?

[Goldendoge]

I think -h 1792 is too much,my 580 8G can only handle 1200.....try lower to under 900
+++++++++++++

My RIG 6x 580 8g have -1152/each and workin just fine with Claymore v11.3. Windows 10 64x with Amd blockchain drivers.

[leonix007]

I think -h 1792 is too much,my 580 8G can only handle 1200.....try lower to under 900
+++++++++++++

My RIG 6x 580 8g have -1152/each and workin just fine with Claymore v11.3. Windows 10 64x with Amd blockchain drivers.

Yep, seems it differs on pandaminer that couldn't handle such -h 

lowering to 900 make it sense

[gazu]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

Does v11.3 support TeraScale/VLIW GPUs?

I do not think so

[Branko]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

Does v11.3 support TeraScale/VLIW GPUs?

Not sure...but how efficient can 5xxx and 6xxx be while coin prices are so low?

[stonedgz]

can somone help with the command line for hardfork monero ( does this mean i can use it for v7 or heavy or lite ?? )

[cryptosize]

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

Does v11.3 support TeraScale/VLIW GPUs?

Not sure...but how efficient can 5xxx and 6xxx be while coin prices are so low?

Some people have free electricity, so efficiency doesn't matter.

[leonix007]

can somone help with the command line for hardfork monero ( does this mean i can use it for v7 or heavy or lite ?? )

You can't use this in Heavy

for v7

   NsGpuCNMiner.exe -xpool stratum+tcp://mine.moneropool.org:80 -xwal YOURWALLET -xpsw x -pow7 1

For Lite


   NsGpuCNMiner.exe -xpool stratum+tcp://mine.moneropool.org:80 -xwal YOURWALLET -xpsw x -lite 1

[New_Jerusalem]

After downloading and installing the AMD blockchain driver "Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 10 64-bit​", the mining speed rose to 640 H/s from 568 H/s.

[Atomicc]

Is there any future plan for additional veriants of Algos.
- heavy (Sumo, Haven)
- ultraheavy (IPBC)

Calymore miners are great I use it for years, and now I will be forced to switch to alternatives...

[powerstr]

Supported CryptoNight variations:
– Cryptonight
– Cryptonight V7
– Cryptonight Lite
– Cryptonight Lite V7
– Cryptonight Heavy
– Cryptonight UltraHeavy

SRBMiner Cryptonight AMD GPU Miner for All Your CryptoNight Needs

[dirton]

Supported CryptoNight variations:
– Cryptonight
– Cryptonight V7
– Cryptonight Lite
– Cryptonight Lite V7
– Cryptonight Heavy
– Cryptonight UltraHeavy

SRBMiner Cryptonight AMD GPU Miner for All Your CryptoNight Needs

TeraScale supported?

[biospb]

Supported CryptoNight variations:
– Cryptonight
– Cryptonight V7
– Cryptonight Lite
– Cryptonight Lite V7
– Cryptonight Heavy
– Cryptonight UltraHeavy

SRBMiner Cryptonight AMD GPU Miner for All Your CryptoNight Needs

Linux supported?