Claymore's CryptoNote AMD GPU Miner v11.3

[ser_ator]

^^

Thanks, am playing wit them now.  Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?

Just easy  ---->   ADDRESS.7850/mysecret

so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address

-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------

So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?  
It also says I need a 10 rating, which I'm not sure I have.
[/quote]
[/quote]

something is wrong wirth your wallet adress. dont mine on it . change  , use normal , windows wallet  .. 

[nowaltcoin]

^^

Thanks, am playing wit them now.  Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?

Just easy  ---->   ADDRESS.7850/mysecret

so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address

-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL / YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------

So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?  
It also says I need a 10 rating, which I'm not sure I have.
[/quote]
[/quote]

yes thats the issue you have to submit at least 10 shares with both miner and correct 'worker' and 'email' !

[juanichiloco]

Thanks for the new version Claymore.

I'm seeing 70h/s speed improvement on my RX570's, has anyone compared power usage at the wall yet?

[Eisenkopf89]

Sorry, I don't not support very old cards anymore.

How about very NEW? Still no support for Polaris_12 (RX 550) ?

We need support for RX550. The card is not that old really.

[GrayCatt]

On version 11.0 , with "Tahiti LE"  ("HD7870 XT"), still  too many "GPU0 found incorrect share".  On v9.7 or other miners, no problems.

[treanski]

version 11 still sucks
10rx 580 8gb

calymmore 11
9,05khs
100% cpu/ramload
1040watts from the wall
devfee

sgminer
9,2khs
nearly no cpu/ramload
1000watts from the wall
no fee

sorry better luck next time

[infojunkiePHD]

For tahiti and Pitcairn it seems still 9.7 is fastest
Very good speedup on Polaris!, 20-30h/s per card or even more

Hmm, in my tests v11 is a bit faster for both Tahiti and Pitcairn, or at least the same. May be you use not optimal settings.

still no support for old HD 7700/7800 cards  
(don't say anything about 9.7 version please, which doesn't have magical "-allcoins" option)

Sorry, I don't not support very old cards anymore.

My experience is the same as restless.  On my two gigabyte 270OC, 9.7 is still the best.

11.0
-h 448 -dmem 1 (11.0 default) - OpenCL hang.
-h 512 -dmem 0  - 840h/s
-h 256 -dmem 1 - 810h/s

9.7
-h 512 (default) - 855-860h/s

[fr4nkthetank]

Sorry, I don't not support very old cards anymore.

How about very NEW? Still no support for Polaris_12 (RX 550) ?

We need support for RX550. The card is not that old really.

RX550 is not a good card for mining really, I dont think claymore will spend time on that...the hashrate density is just awful
edit:  maybe try another xmr software

[garytheasshole]

Sorry, I don't not support very old cards anymore.

How about very NEW? Still no support for Polaris_12 (RX 550) ?

We need support for RX550. The card is not that old really.

RX550 is not a good card for mining really, I dont think claymore will spend time on that...the hashrate density is just awful
edit:  maybe try another xmr software

It's not that bad, it's doing about 400ish with xmr-stak and its rather cheap and easy to find.

[notbatman]

^^^ It might just be the best card on Watts per H/s. However AMD still refuses to support OpenCL under Linux and I can't get the flgrx open source drivers working on 16.04.

[infojunkiePHD]

It's not that bad, it's doing about 400ish with xmr-stak and its rather cheap and easy to find.

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

[notbatman]

AMD is cock-blocking by limiting 550 OpenCL to Windows and by proxy the max number of GPUs to 8.

[dhmctrader]

v11 puts all my Samsung 480/580 8gb over 1k H/s, I can almost see that un-modded vega 56...

Yup, getting 1000 give or take with 11 on a Asus 580 w/ Samsung.

Still can't get an MSI 580 with Hynix over 850.

[lankyman]

I really hope this version doesnt have issues.
10.2 for me didnt give me full performance and my 3rd GPU of the 3 identical RX4 cards was half speed.
Tested many drivers and 2 computers - windows 7.
9.7 was giving me full speed like SGminer.

[GrayCatt]

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

My RX550 with 2GB gives 420...430 h/s on "Gateless Gate" and on "STAK XMR". The key is "threads=2". With its price under $100 and ~75 Watt power, I think it's a good choice now.

Claymore, please, bring back support of "Polaris 12", at least to the degree as of v9.7 !

[Eisenkopf89]

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

My RX550 with 2GB gives 420...430 h/s on "Gateless Gate" and on "STAK XMR". The key is "threads=2". With its price under $100 and ~75 Watt power, I think it's a good choice now.

Claymore, please, bring back support of "Polaris 12", at least to the degree as of v9.7 !

My RX550 Rig needs 320W (hole system) with a hashrate about 1875h/s with standard drivers and without undervolting.

[infojunkiePHD]

Really? What cards are doing 400?  my 560s are doing 450, so with the reduced cost and wattage I'd be very very interested.

My RX550 with 2GB gives 420...430 h/s on "Gateless Gate" and on "STAK XMR". The key is "threads=2". With its price under $100 and ~75 Watt power, I think it's a good choice now.

Claymore, please, bring back support of "Polaris 12", at least to the degree as of v9.7 !

What's your raw/intensity?

[GrayCatt]

My RX550 with 2GB gives 420...430 h/s on "Gateless Gate" and on "STAK XMR". The key is "threads=2". With its price under $100 and ~75 Watt power, I think it's a good choice now.

Claymore, please, bring back support of "Polaris 12", at least to the degree as of v9.7 !

What's your raw/intensity?

Code:

{
  "algorithm": "cryptonight",
  "rawintensity": "320",
  "worksize": "16",
  "gpu-threads": "2",

...and, certainly, patched BIOS plus some overclock in WattMan.

[rascabily]

I have not taken almost anything extra power but what if I have been a very good stabilized. with 10.2 or mine all was error was only with 9.7 now perfect.
Thank you.

[Skol600ml]

Way better.

6 RX 580

+2,4 % more hash, no invalids so far (i got some with 10.2) and less to no fluctuation.

-h on new default (1152 if not mistaken) instead 1800

I got no crash with 10.2, so i can't say about that.