Claymore's CryptoNote AMD GPU Miner v11.3

[vacarosie200]

Claymore's CryptoNote AMD GPU Miner v11.2 not work with rx550

[1715406087]

1715406087

[1715406087]

1715406087

[1715406087]

1715406087

[1715406087]

1715406087

[skynetcoin]

i had 2500 Hs with claymore v 10.2 but now i have just 2200 Hs with claymore v 11

i back to 10.2

[Grinner888]

Hi Claymore,

how do you properly configure the epools file to have spacepools as the backup pool? stratum+tcp://pool.etn.spacepools.org:7777 doesnt work. it skips to the next pool. this pool does not support ssl. tho this format works for the bat file

[mandalore]

Need help understanding behavior of Claymore with 2 Graphics cards

I have 2 old graphics cards (I am testing code while new cards where ordered)

AMD Radeon HD 7800 (x2)

When i have both cards in the machine and run NsGpuCNMiner.exe GPU 0 gets 25 h/s, but GPU 1 gets 336 h/s.

If I take out GPU 0 and run with Just GPU 1 it only runs at 55 h/s

I have set all the environment variables correctly per the instructions.

Anyone encounter this before - or if you know what I am doing wrong, please let me know!

Thanks,
Chris

[hiron1986]

Claymore is closing itself (or crashing)?

23:45:55:363   10d4   XMR: Stratum - Connected (cryptonight.jp.nicehash.com:33355) (SSL/TLS)
23:45:55:645   10d4   got 79 bytes
23:45:55:645   10d4   buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internal server error"}}

23:45:55:645   10d4   parse packet: 76
23:45:55:645   10d4   Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
23:45:55:645   10d4   buf was cleared
======================================================================

After that, the miners is closed. The error handler should try reconnect infinitely after x seconds instead.

[bytiges]

What is the hashrate on vega compared to cast-xmr ?
Shall we use blockchain drivers or the official ones ?

[Claymore]

Claymore is closing itself (or crashing)?
...

What is the hashrate on vega compared to cast-xmr ?
Shall we use blockchain drivers or the official ones ?

After that, the miners is closed. The error handler should try reconnect infinitely after x seconds instead.

Redownload v11.2:
https://bitcointalk.org/index.php?topic=638915.msg27361119#msg27361119

[idontknowmining]

Guys,
New to mining, have 3 x RX 570 4GB. 
Edited config file for like below:

-xpool stratum+ssl://xmr-eu1.nanopool.org:14433
-xwal *myaddress*
-xpsw x

-allpools 1
-h 800
-dmem 1
-tt 75

Currently only getting hash rate of 650 per card.  What changes do I need to make to improve performance?
No overclocking yet.

14:03:04:209   94c   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
14:03:04:214   94c   º           Claymore's CryptoNote AMD GPU Miner v11.0            º
14:03:04:219   94c   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
14:03:04:224   94c   
14:03:04:228   94c   b517
14:03:04:436   94c   XMR: 1 pool is specified
14:03:04:446   94c   Main Monero pool is xmr-eu1.nanopool.org:14433
14:03:04:975   94c   OpenCL platform: AMD Accelerated Parallel Processing
14:03:04:983   94c   OpenCL initializing...
14:03:04:988   94c   driver 10.0.2442.12
14:03:04:993   94c   AMD Cards available: 3
14:03:04:997   94c   GPU #0: Ellesmere, 4096 MB available, 32 compute units
14:03:05:040   94c   GPU #0 recognized as Radeon RX 470/570
14:03:05:045   94c   card 0, m1 4096, m2 2880 w 256
14:03:05:050   94c   GPU #1: Ellesmere, 4096 MB available, 32 compute units
14:03:05:125   94c   GPU #1 recognized as Radeon RX 470/570
14:03:05:133   94c   card 1, m1 4096, m2 2880 w 256
14:03:05:142   94c   GPU #2: Ellesmere, 4096 MB available, 32 compute units
14:03:05:151   94c   GPU #2 recognized as Radeon RX 470/570
14:03:05:160   94c   card 2, m1 4096, m2 2880 w 256

[notbatman]

Claymore is closing itself (or crashing)?
...

What is the hashrate on vega compared to cast-xmr ?
Shall we use blockchain drivers or the official ones ?

After that, the miners is closed. The error handler should try reconnect infinitely after x seconds instead.

Redownload v11.2:
https://bitcointalk.org/index.php?topic=638915.msg27361119#msg27361119

Have you fixed the linux seg fault issue with NH or is this just the windows version that's fixed? I've lost over 15% of my hashrate using gatelessgate....

[Claymore]

Fixed the seg fault with NH?

I cannot see this bug (don't have it in Windows and don't have access to Linux system currently), but I found possible reason and fixed it. So need someone who sees this bug in Windows and can confirm that it is fixed in latest update. Or I will check it on Linux system directly in a few days.

[notbatman]

Fixed the seg fault with NH?

I cannot see this bug (don't have it in Windows and don't have access to Linux system currently), but I found possible reason and fixed it. So need someone who sees this bug in Windows and can confirm that it is fixed in latest update. Or I will check it on Linux system directly in a few days.

It usually happens right after payment processing when the system disconnects all the miners for a second for some reason. The miner reconnects but the NH server isn't quite initialized and sends malformed stratum data. I'm guessing this data is stored in an undeclared variable and causes a buffer overflow but alas my coding skills are crap and I don't know shit haha...

[NewbieMiner17]

Hey guys,

Haven't posted in a while

Is anyone mining Electroneum on Nanopool? What sort of H/s should I be expecting from Rx480s 4Gbs? Just testing so far but from initial setup only getting 750/card.

Thanks in advance.

[Azurite]

i can mining Bitcoin or Etherium with GTX 750ti ? , u can help me?

[mandalore]

Just bumping this post.  Would love to know if the below behavior is due to the older cards and will be gone when my 1080s arrive  - or if it's my config.  TIA

Need help understanding behavior of Claymore with 2 Graphics cards

I have 2 old graphics cards (I am testing code while new cards where ordered)

AMD Radeon HD 7800 (x2)

When i have both cards in the machine and run NsGpuCNMiner.exe GPU 0 gets 25 h/s, but GPU 1 gets 336 h/s.

If I take out GPU 0 and run with Just GPU 1 it only runs at 55 h/s

I have set all the environment variables correctly per the instructions.

Anyone encounter this before - or if you know what I am doing wrong, please let me know!

Thanks,
Chris

[velillen]

Hey guys,

Haven't posted in a while

Is anyone mining Electroneum on Nanopool? What sort of H/s should I be expecting from Rx480s 4Gbs? Just testing so far but from initial setup only getting 750/card.

Thanks in advance.

That seems ballpark correct if you aren't overclocked or bios modded. the 470 I had  (completely stock) did a bit less than that

[notbatman]

HD 7800? methinks those are more than 2 years old, however I've never seen a 7800 before so I could be mistaken...


I retired my HD 7950 a few weeks ago. God bless that thing, it mined a lot of coins!

[NewbieMiner17]

Hey guys,

Haven't posted in a while

Is anyone mining Electroneum on Nanopool? What sort of H/s should I be expecting from Rx480s 4Gbs? Just testing so far but from initial setup only getting 750/card.

Thanks in advance.

That seems ballpark correct if you aren't overclocked or bios modded. the 470 I had  (completely stock) did a bit less than that

Thanks for feedback. Yeah currently OC and getting around 28.5MH dual Mining ETH and something else.

Guess no really worth mining Electroneum at the moment. Better off ETH and exchanging it.

[minekheim]

Hello maybe someone can help me. I'm looking in my rig a broken (too hot) card. In the clay more this is the GPU0 in the GPU Z however the GPU 1. See I in the HWinfo this is then the GPU5. So I can not set a card because it is usually the wrong one. Is there a logic in the numbering of PCI slots? It makes no sense if I set the card 0 in the Claymore 11.1 and 9.7 and the card 1 is controlled. Does anyone have an idea to get that?

[dotachin]

Partially solved in 11.2

Claymore, stability problem!

Almost once a day on different pools, different hardware located on different farms some miner instances suddenly stops at the same time (when on same pool) and blocks batch file from further execution: https://i.imgur.com/leifBzr.png

- i use one miner per card, but even on 1-card farm it may stop
- miner versions are 10.2 and 11
- stops only some of miners but not all, one miner with same card and same settings may stop while other works
- typical period between stops is 12-18h
- rig uptime is not likely to be related
- h values are fine-tuned for each card for better performance, but are 16-fold (h%16==0)

[fenixlz]

Hey Claymore, on your ETH dual miner there is an argument: -ejobtimeout 1. Why we don't have it on CryptoNote miner? It is necessary when using unstable connection, for example 3G/LTE modems. 2-3 times a day there is a situation when modem reconnects to the cellular network (it may be that ip address is switching) and pool connection become broken, but miner still thinks it is ok and sends shares to the pool but the pool is not responding with accept or reject. The better solution would be to reset a connection if there is no response from the pool.